If you are a DIY-er or an apprentice you would like to know your tool. This is because if you know your tools i.e., the design and specifications. Then you can apply it for a specific purpose. This way you get the job done correctly without damage to the tool or the surface.
The functional parts of Best 18V cordless drills are…
The Power Source – Drills run od AC and DC power There are corded and cordless drills. When they are corded you have constant power and unlimited runtime. Cordless drills have batteries that have to be charged.
- There are 4 – 8-volt drills for light screw-driving and working on delicate materials.
- The 12-volt drills are compact and light but do 80% work the heavier professional drills can do.
- There are 18- and 20-volt drills forheavy-duty work. They are lightweight and preferred by professionals.
- The 36-volt drills are rarer but more powerful.
Battery Chemistry – There are Nickel Cadmium (NiCad) and Nickel Metal Hydride (NiMH) batteries. These are obsolete and replaced by the more efficient Li-ion batteries.
Trigger – Other than 4 volt and 8-volt batteries all other drills have variable power. This means you can pull the trigger and increase the amount of power and speed of the tool.
Rocker switch also known as the Rotation direction slide. In the initial position, the drill would be rotating in the counter-clockwise. If we push that slide in it would begin turning clockwise. The screw is driven in using this position.
Gear selection switch – There is an inverse relationship between the speed and torque on the drill. This means higher the speed, lesser the torque. In position 1 – this means high power and low speed that is ideal to drill hard materials. When you slide the switch down you expose the number 2. This setting would offer high speed and low power. Some drills have 3 or 4 gears that are chosen from the electronic controls above the battery. They may even be connected via Bluetooth to your smartphone.
Clutch/Mode Collar – There is a rotating collar behind the chuck. This allows you to pick a torque setting – lower the number lesser than the torque. It is important to note here that these are just marked positions where the motor connects to the drill end of the tool.
BEST 18V CORDLESS DRILLS IN 2021
1. Makita CT225R 18V Cordless Drill
Makita power tools are world-famous for their quality and durability. This line of tools brings you the Star Protection Computer Controls that protect against over-discharge, overload and over-heating of the tool and battery.
Makita CT225R is an 18-volt 2.0 Ah LXT Li-ion battery powered cordless tool. This is offer brings you two pieces – a drill-driver and an impact driver. The 1/2-inch drill driver offers variable speeds ranging from 0 – 400 RPM and 0 – 1500 RPM. The tool has a four-pole motor. The impact driver offers a variable speed ranging from 0 – 2300 RPM and 0 – 3200 RPM. The tool offers 1460 inch-pounds of maximum torque. The tools are fitted with an 18-volt compact Li-ion battery that offers 50% more runtime. It is fully charged in 25 minutes. The tool is light and lends dexterity and maneuverability to the user.
Makita CT225R combo kit is meant for finishers and installers. These are best in class tools of Li-ion cordless tools – excellent for fastening, driving, and drilling. These tools belong to the renowned 18V Li-ion series by Makita. They charge up fast in 25 minutes. This means they would be fully chargedby the end of your lunch break. The Star Protection Computer Controls not only extends the battery life but also improves performance. There is a built-in LED light to illuminate the work area.
Makita CT225R kit has a 1/2-inch drill-driver with two speeds – 0-600 and 0-1900 RPM to produce a torque of 480 in-lbs. The 1/2-inch Driver-Drill is compact at7.25 inches. It weighs only 3.3 pounds reducing operator fatigue. The impact driver has a variable speed of 0-2900 RPM and 0-3500 IPM. It delivers a torque of 1460 in-lbs. This tool is only 5.375 inches long.
Makita CT225R consists of a cordless driver drill, an impact driver and a charger. There are two 18-volt compact Li-ion 2.0Ah battery and a tool bag. The tools are supported by a three-year warranty.
- Variable speeds
- Built-in LED light
- Rapid charge Li-ion battery
- Compact & maneuverable
2. Milwaukee M18 2606-21CT 18V Cordless Drill
Milwaukee is a brand owned by the Techtronic Industries. The other brands owned by the company are Ryobi, Hoover, AEG, Vax and Dirt Devil. They produce cordless and corded tools such as cutters, handsaws, screwdrivers, knives, trims and combo kits
Milwaukee M18 has a four-pole frameless motor. It features a tough durable design combined with rare earth magnets. This set up gives a longer life to the tool and brings you the best in class 500 in-lbs. of torque at 0 – 400 RPM and 0 – 1800 RPM. The tool as a compact design that allows you access into narrow spaces. The tool has a diecast metal gear case and a chuck. This makes the tool impact and shock-resistant making it durable. The circuits and battery carry REDLINK Intelligence. It is an advanced algorithm that protects the tool from overload, overheating and abuse.
Milwaukee M18 is a cordless drill driver suitable for driving screws and drilling holes. It will work on all materials – wood, plastic, and metal. The four-pole motor produces 500 inch-pounds of torque and variable speeds for turning fasteners and drilling holes. The tool’s circuit board, charger, and battery complement each other with the RedLink Intelligence.
This is overload protection that defends against abuse such as overload, overheating, etc. The RedLink program brings 40% more runtime to the battery. This, in turn, improves the efficiency of the tool by increasing torque and speed by 20%. The tool can operate in a wide range of temperatures -18 – 55C. There is a battery indicator or fuel gauge. The tool is only 7.25-inch-long giving you access into narrow niches and overhead rafters.
Milwaukee M18 weighs only 2.9 pounds and is 7.25 inches long. This cordless drill works at 18 volts producing a peak torque of 500 inch-pounds. This 1/2-inch single sleeve metal ratcheting lock has a variable speed of 0 – 400 RPM and 0 – 1800 RPM.
Milwaukee M18 arrives as a kit that includes a 1/2-inch drill-driver, one Compact REDLITHIUM battery pack, a charger, and one carry case. The tool has a 5-year warranty.
- 4-Pole Frameless motor
- Li-ion battery
- Fuel gauge
- Overload protection
3. Makita XFD10R
This is another offering my Makita – an XFD10R kit with an 18-volt compact Li-ion battery, charger, and 1/2-inch drill-driver tool.
Makita XFD10R has a four-pole motor that delivers 480 inch-pounds of torque. The tool has a two-speed transmission of 0 – 600 and 0 – 1900 RPM. This speed applies to a wide range of driving and drilling applications. The tool has an all-metal gear build that lends it durability. There is a ratcheting chuck for bit retention that prevents slippage.
The 7.25-inch long tool has a built-in LED that illuminates the narrow and dimly lit places. The tool is comfortable to use as it has an ergonomically designed handle. The soft rubberized grip gives better traction. It weighs only 3.3 pounds with the battery. The design and weigh reduce operator fatigue. There is an 18-volt, 2.0 Ah Li-ion battery to power the tool.
Makita XFD10R brings you superior ergonomics. The gears, motor, the Star Protection Computer control technology improve performance. The tool brings you power, comfort, and speed due to excellent design. The powerful 4-pole motor delivers 480 inch-pound of torque to turn fasteners and screws. There is a two-speed transmission to deliver speed up to 400 and 1900 RPM.
These speeds are ideal for drilling and driving applications. The tool has an LED on the underside of the curve of the pistol shape. This allows you to see the work area minus the shadows. The handle has a rubberized grip for better comfort. The extreme protection protocol protects your tool from over-discharge, overload and overheating. The efficient power management system brings you 3 times faster charging and 50% more runtime.
Makita XFD10R is a 1/2-inch drill-driver that features a 4-pole motor. It delivers 480 inch-pounds of torque and two transmission speeds of 0 – 600 and 0 – 1900 RPM. The tool is 16.6 inches high, 12.4 inches long and 5.2 inches wide.
Makita XFD10R kit has a 1/2-inch drill – driver tool, two batteries, charger, and a tool case. The tool is supported by a 3-year warranty.
- Star protection controls
- 3 times faster charging
- 50% more runtime
- Efficient power management
4. Hitachi DS18DBFL2
This tool is covered by the Lifetime warranty on the brushless motor. The motor delivers more power with minimum energy loss. As there is no friction the tool does not heat up, too.
Hitachi DS18DBFL2 has a brushless motor that exerts 620 inch-pound of turning force and revs up to 1800 RPM. There is a 1/2-inch ratcheting keyless chuck that allows you to change the bits quickly. The motor is powered by an 18-volt Li-ion battery. It is a fade-free slide-type battery. The tool has a 22 stage plus 1 clutch setting that offers 22 levels of torque and one drill mode. You can bring precision and control to your work using these settings. There is an optical trigger switch that offers variable speed actuation. The trigger is responsive and wear-resistant. The built-in LED lights up dark and dimly light work areas without any shadows. There is a battery level indicator that informs you of the remaining charge. The metal hook allows you to hook the tool to the belt.
Hitachi DS18DBFL2 has the signature ergonomic design by Metabo. It has a well-balanced and comfortable grip and design. The tool will drill through plastic, wood, mild steel, wood and aluminum. The 22 + 1 clutch offers 22 torque settings that allow you precision and control over all applications. The Li-ion battery is covered by a 2-year warranty and charger, by a 1-year warranty. The tool is well-balanced and ergonomically designed to reduce fatigue.
Hitachi DS18DBFL2 is an 18-volt tool with a 1.5Ah Li-ion battery. The tool produces a torque of 620 inch-pounds and a no-load speed of 0 – 1800 RPM. This 1/2-inch clutch tool can penetrate 2 inches of wood and 1/2 inch of steel. The tool is 6.9 inches long and weighs 3.5 pounds. It has 22 + 1 clutch settings.
Hitachi DS18DBFL2 is a kit with two Li-ion batteries, a charger, a Phillips bit and a carrying case. The tool is supported by a lifetime warranty. The battery has a 2-year warranty and the charger a 1-year warranty.
- 22-stage + 1 clutch settings
- Optical trigger switch
- Battery indicator
- Ratcheting keyless clutch
- Metal hook
5. Ridgid X4 R9602
Ridgid brings you another 18-volt drill cum driver kit. This kit carries the core tools required to start a job in a project or site. You can register the tool for a Lifetime Service agreement.
Ridgid X4 R9602 has a drill and driver that gives 535 inch-pounds of torque and is compact. There is a 1/2-inch single sleeve ratcheting chuck to secure the bits. The impact driver has an output of 1750 inch-pounds of turning force for tough jobs and applications. This is a one-hand bit loader that allows you to change them while your other hand is busy.
Ridgid X4 R9602 drill-driver has features that will help you complete heavy, medium and light tasks done. There is a removable top-mounted handle for better leverage. It is useful for driving pilot holes in hardwood. The adjustable clutch lets you drive large and small fasteners through the various thickness of materials. The impact driver drives up to 1400 inch-pounds of turning force. It is ideal for large fasteners and works on heavy materials. There is an LED light to illuminate dimly lit areas. The ambidextrous clip helps keep the tool close.
Ridgid X4 R9602 drill offers 535 inch-pounds of torque and low speeds it produces 0 – 450 RPM. At high speeds, it produces 0 – 1650 RPM. The impact driver offers a maximum torque of 1750 inch-pounds. The tool offers a no-load speed of 0 – 2400 RPM and 0 – 3100 IPM. The battery capacity is 1.5 Ah and the output voltage is 18V and the input is 120V.
Ridgid X4 R9602 kit comprises of two tools, two batteries, a charger, and a carry bag. The tool carries a lifetime warranty.
- Impact driver
- Ambidextrous belt clip
6. Ryobi P1832
This is an 18 colt One+ cordless drill-driver and impact driver offer. This means you are ready and set for your work as soon as you receive the kit.
Ryobi P1832 kit has a p277 drill-driver that has a clutch with 24 settings. There is a dual-speed gearbox. These features give you better control over the drilling, etc. There is a keyless chuck due to which you can replace the bit quickly. The P235 impact driver has a gearbox made of aluminum. It delivers a torque of 1600 inch-pounds.
There is a 1/4-inch quick connect coupler that quickens the process of changing the bit. There two batteries that are compatible with all One+ system. This means you can use batteries from other tools in this series. This pistol-shaped tool gives you a better grip. The rubber mold grips help increase stability and dexterity while using the tools. There is a p118 charger that powers up the batteries. The base of the tool has a magnetized tray that holds the fasteners and bits.
Ryobi P1832 drill has a 1/2-inch single sleeve keyless chuck There is an automatic spindle lock to change bits easily. The 24-position clutch and a two-position gearbox can be matched to your driving and drilling needs. There is a MagTray at the base that holds the bits and screws while your hands are busy also some on-board storage for your convenience and a bubble level on the top to ensure drilling and driving accuracy. The GripZone overmold offers an optimal and comfortable grip.
Ryobi P1832 drill-driver is 3.1 pounds and 11 inches by 7.9 inches by 9.8 inches in dimensions. It has two speeds of 0 – 440 and 0 – 1600 RPM. The chuck is 1/2-inch and there are 24 clutch positions. The impact driver has a 1/4-inch coupler that produces a torque of 1600 inch-pounds at a speed of 0 – 2600 RPM. The two tools – drill and impact driver are accompanied by two 18-volt Li-ion batteries with an input of 120 volts at 60 Hertz and 50 watts.
Ryobi P1832 kit includes a drill-driver, an impact driver, a dual chemistry charger, two Li-ion batteries, and a tool bag. Ryobi P1832 is supported by a 3-year warranty.
- Keyless chuck
- On-board storage
- GripZone overmold
7. Bosch DDB181-02
Bosch Power Tools is a German company that makes world-class tools There is a cordless drill-driver, two lithium-ion batteries, an 18-volt charger, and a contractor bag.
Bosch DDB181-02 is compact and lightweight at 3 pounds. It is easy to handle and helps you get into compact narrow spaces. The 18-volt battery and the tool are lightweight for efficiency during drilling and screw driving work. This drill has high speed at 1300 RPM and torque of 350 inch-pounds. It offers a two-speed transmission for variable speed. One is for heavy-duty projects and the other for speed. Both applications offer maximum efficiency for precise drilling and screw driving. There is a convenient LED light that illuminates dimly lit workspaces.
Bosch DDB181-02 optimizes your performance in every application. The two-speed transmission – 0 – 400 and 0 – 1300 RPM is ideal for drilling and driving. One speed is optimized for heavy driving while the other for heavy-duty drilling. It is a well-balanced, lightweight and ideal for overhead tasks. The tool is 100% compatible with 18-volt, 2.0 Ah batteries, and charger. You can also use the CORE 18 volt Next-gen batteries with this tool. There is an Electronic Cell Protection to improve battery life. The 20 plus one setting with a variable speed trigger is versatile and matches the task at hand. The compact lightweight design will help you reach into tight corners.
Bosch DDB181-02 kit includes a 1/2-inch drill-driver that runs on an 18 volt,1.5 Ah Lithium-Ion battery. The chuck is 1/2 inch, the height 7.75 inches, the length is 7.1 inches and the width is 1 inch. The No-load speed is up to 400 and 1300 RPM. You can attach a dust extraction and collection hood.
Bosch DDB181-02 kit includes the 1/2-inch drill-driver, screwdriver bit, two 1.5 Ah Slim pack batteries, a charger, and a contractor bag. The kit has a one-year warranty and the battery has a 2-year warranty. You can avail of the three-year ProVantage plan.
- 350 In-Lbs. of torque
- Motor brake for driving
- Two-speed transmission
- LED light
- 20 + 1 clutch settings
8. Milwaukee M18 2801-20
This is a tool only offer of a 1/2-inch compact drill – driver. The tool is driven by a brushless motor and powered by a Li-ion battery.
Milwaukee M18 2801-20 has a compact design for excellent control and balance. It is ideal to work in compact spaces. The tool’s case is made of metal making it unbreakable and shock-resistant. The tool has a 1/2 inch ratcheting single sleeve chuck. The brushless motor is carrying a chip loaded with the RedLink Intelligence. This algorithm protects the tool from overload, overheating and other issues. It monitors the temperature to ensure maximum battery life and damage prevention. The RedLithium Battery has superior construction and delivers more works per charge and battery life.
Milwaukee M18 2801-20 is a compact, brushless drill driver with a 1.5-inch head. This is the best drill in this class. It is compact and delivers unmatched power due to the brushless motor. The frictionless motor delivers optimum performance and is powered by the RedLithium batteries. The RedLink technology for power tools ensures proper transmission of power preventing overload. The RedLithium batteries offer efficient power delivery and no downtime.
This drill has a compact body of 6.5 inches and weighs 3.4 pounds with the battery attached. The design offers excellent control over the drill -driver. The unit delivers 500 inch-pounds of turning force at the variable speed of up to 500 and 1800 RPM. These are ideal parameters for fastening and drilling applications. The drill has an all-metal case and a 1/2-inch chuck.
Milwaukee M18 2801-20 is 6.5 inches long, 2.31 inches wide and 7.75 inches high. The unit has a variable speed of 500 and 1800 RPM and produces a torque of 500 inch-pounds. The cordless tool weighs 2.5 pounds.
Milwaukee M18 2801-20 is a 1/2-inch drill – driver bare tool with the belt clip. The tool is supported by a 5-year warranty.
- Brushless motor
- RedLithium battery
- All metal case
- Variable speed
9. Makita XFD11ZB
This is an 18 volt, 1/2-inch drill driver. The drill works on a sub-compact brushless motor driven by an LXT Li-ion battery. This is a bare tool offer.
Makita XFD11ZB has a compact ergonomic design. The unit is only 6.375 inches long. The rubberized grip is soft and comfortable. The pistol-shaped design helps a better reach and view of the work spot. The tool brings you a two-speed transmission – 0 – 500 RPM and 0 – 1700 RPM. These speeds are useful in a wide range of applications. The tool is only 2.8 pounds this helps move the hand and arms more dexterously reducing operator fatigue. This tool only offers therefore the battery is not included. The tool comes with an Extreme Protection Technology (XPT) The tool is engineered for protection against dirt, dust, and water. It will work in the harshest of conditions.
Makita XFD11ZB helps you do more with less. This sub-compact drill-driver is cordless and without a battery. The tool is a drilling and driving solution that is very light. This 18-volt drill driver belongs to the compact class of tools by Makita. These tools have a brushless motor, an 18-volt battery, and low weight boosts the performance. The wide range of tools in the 18-volt section of Makita tools. The brushless motor allows 2 speeds – one for drilling applications and the other for driving. There are LED lights to light up your work spot. The battery charges up quickly so there is no downtime. Each tool has the Star Protection Computer Controls that equip the battery and the tool with protection. Each tool is protected against overload, overheating and discharging
Makita XFD11ZB can work on a 1/2-inch steel sheet. It will work on a 1.437-inch-thick wooden plank. The variable speeds are up to 500 RPM and 1700 RPM with a maximum torque of 40 Nm. The tool is 6.375 inches long and 2.8 pounds in weight. This cordless tool uses an 18-volt battery.
Makita XFD11ZB tool comes with a three-year warranty and a belt hook.
- Brushless motor
- Ergonomic design
- Two-speed transmission
- Keyless chuck
- Electronic transmission
10. Bosch GSR18V-190B22
This is another offering by Bosch with an 18-volt battery. This drill cum driver runs on 1.5 Ah SlimPack batteries.
Bosch GSR18V-190B22 is a drill-driver kit with and enhanced torque rating of 480 inch-pounds. The tool is compact, well-balanced and lightweight weighing only 2.7 pounds. It is only 7.8 inches long with 20 plus one clutch settings for the drill and driver. You will get accurate results each and every use of the tool. This is a keyless ratcheting tool with a 1/2-inch chuck that is auto-lock and enables easy change of bits. There are 2-speed settings up to 450 and 1700 RPM. There is an LED light that is ergonomically designed with a soft-grip handle. The tool runs on a 1.5 Ah SlimPack battery of 18 volts.
Bosch GSR18V-190B22 features a two-transmission speed – one optimized for high torque turning of fasteners and screws. The other is optimized for high-speed drilling. The 1/2-inch drill produces 480 inch-pounds of torque. Combine this with the 20 plus one clutch settings you will get accurate work each time. It is only 2.8 pounds this easy to maneuver for overhead and sideways jobs. There is an LED on the tool that illuminates the area without shadow.
Bosch GSR18V-190B22 weighs 2.75 pounds. the two Li-ion batteries are 18 volts and 1.5 Ah. The brushless tool requires 18-volt batteries and 27 watts of power. t produces a torque of 480 inch-pound and 450 and 1700 RPM. It is compact at 8.8 inches by 7.8 inches and 3 inches.
Bosch GSR18V-190B22 is a kit with an 18-volt compact 1/2-inch drill-driver. There are two 1.5 Ah SlimPack batteries, a charger, and a carry bag.
- Two-speed transmission
- 20 plus one clutch settings
- Excellent torque
- Ergonomic design
11. Makita XPH10Z
This is a tool only offer by Makita. This cordless 1/2-inch hammer drill requires an 18-volt LXT Li-ion battery.
Makita XPH10Z is a part of the 18 Volt Li-ion series by Makita. This is the world’s largest cordless tool line. These 18-volt batteries are slide-style batteries that charge up fast and offer excellent runtime. The tool has a rubberized grip that reduces worker fatigue and increases job comfort. This innovative tool has dual LED lights with an afterglow that illuminates the work area. The power is transmitted through the 4-pole brushless motor.
The motor produces 480 inch-pounds of turning force. There are two speeds – 0 – 600 and 0 – 1900 RPM. These speeds find application in a wide range of activities hammering, drilling, and driving. All metal gears increase the stability of the tool. The tool is extra durable due to the Extreme Protection Technology (XPT) that has seals inside the tool. This means your tool can tolerate dust, dirt, water.
Makita XPH10Z is a tool only offer that can be used for driving, drilling, and hammering. The tool charges up to three times faster due to the rapid optimum charger. The Lithium-ion battery charges up quickly and offers 50% more runtime. The Star Protection controls prevent overcharging, overheating and discharging. The tool has all-metal gears to improve the durability of the tool. The tool can work 1/2 inch of steel sheets, it can impact 1.5-inch-thick wood and 1/2-inch thick masonry. With high-efficiency brushless motors and high ampere-hour batteries with 18V X2 technology. You can meet all your corded demands with these cordless tools. Besides this one cordless platform can power up all your Makita tools.
Makita XPH10Z is only 7.75-inch-long and weighs 3.4 pounds It has two speeds – 0 – 600 RPM and 0 – 1900 RPM.
Makita XPH10Z hammer driver-drill is supported by a 3-year warranty.
- 4-pole motor
- Afterglow LED
- Ergonomic design
- Variable speed
- XPT engineering
12. BLACK+DECKER GCO18SFB
This tool comes from the Black and Decker 18-volt tool line. The brand belongs to Stanley, Black, and Decker. They manufacture tools and hardware for industries and homes.
BLACK+DECKER GCO18SFB is an 18-volt cordless drill-driver with variable speed. The kit includes a stud sensor that detects up to 0.75 inches deep. There are an 18-volt battery, a charger, and a storage bag. This is a lightweight and compact tool with a keyless chuck. There are 24 positions of the chuck that provide maximum control without stripping the screw. The tool weighs 4.7 pounds with the battery. The pistol-shaped tool has a soft and easy grip that reduces slippage and enhances comfort. The keyless chuck helps change of bits – quick and easy. The tool offers a variable speed plus reverse. It helps control drilling through various types of materials.
BLACK+DECKER GCO18SFB is useful in drilling holes through plastic, wood, and metal. The screwdriver punches through plastic, wood, and metal. The tool offers a variable forward torque and reverses too. This allows you to fasten and loosen screws, etc. The stud finder is a hand-held device that helps find frame studs in wooden buildings. It has a magnetometer sensor that points out the position of nails, screws, and metal studs in all types of woods.
The tool comes with an easy to slide out the battery. The tool will work with batteries of other Black and Decker tools and vice versa. This means if you have another tool you can replace your exhausted battery improving work efficiency. You can change the bits quickly on the keyless chuck. The 24 positions on the clutch give you precise control over all your operations.
BLACK+DECKER GCO18SFB has 24 clutch settings with 0 – 750 RPM. It runs on an 18-volt battery. The stud finder can scan up to 3/4th of an inch into the wall.
BLACK+DECKER GCO18SFB kit consists of an 18-volt drill, a battery pack, a DC charger, a stud finder, and a storage bag.
- Stud finder
- 24 clutch positions
- Ergonomic grip
13. Genesis GCD18BK
This drill cum driver is not a big brand but a well-known and respected one. If you are looking for a drill at a less price this is the tool for you.
Genesis GCD18BK is powered by 18-volt nickel-cadmium batteries. The ampere-hour rating is 1.1 and it takes 3 -5 hours to charge up. You can get another battery to work without a break at work. There are 16 clutch positions and 1 drilling position. The tool has LED lights and a magnetic tray to hold the bits and screws. The bubble level allows you to do a precise job. There is an electric brake that stops the drill immediately when you stop the drill. The kit comes with various types of bits. This means you can set up shop as soon as the kit arrives. The charger has an indicator light that tells you it is fully charged. The chuck is 3/8 inches and good for some light work.
Genesis GCD18BK is a cordless tool that is versatile with full features. It is perfect for your DIY projects and handyman jobs at home. There are a keyless chuck, variable speed, and 16 + 1 clutch settings. The tool features a bubble level, magnetic tray and LED lights. There is a 13 pieces bit kit with a storage case to keep it all together. This ergonomically designed tool has a rubberized, non-slip grip on a pistol-shaped tool.
Genesis GCD18BK is an 18-volt drill with a 3/8-inch chuck. There is an 18V Ni-Cad battery that charges at 1.1 amp/hour in 3 – 5 hours. The variable speed is 0 – 550 RPM. The tool weighs 4 pounds. It is 12 inches by 11 inches by 4 inches in dimensions.
Genesis GCD18BK kit has an 18-volt drill, with 6 drill bits, 4 Phillips head drier bits, 2 flathead driver bits, 1-bit holder and a hard-shell case. It has Nickel Cadmium batteries and a 2-year warranty.
- Keyless chuck
- LED light
- Bubble level
- 16 + 1 clutch settings
- Electric brake
14. Enegitech BLR18B-0001
Enegitech makes the highest quality products from premium quality materials. These tools are CE certified and exceed OEM standards. The company dedicates itself to providing cordless tools and batteries. They also make replacement batteries for laptops and other equipment.
Enegitech BLR18B-0001 is an 18-volt impact driver. It is a durable tool that is compatible with the Makita 18-volt Li-ion and Enegitech ETB1830B batteries. The batteries are sold separately. The brushless motor runs the tool cooler while saving battery. The tool runs up to 50% longer per charge. This saves money and charge time.
This tool is many times advanced than the corded tools as it can be used indoors and outdoors. The casing is sealed against water, dirt, and dust. And you don’t have to worry about finding sockets to run it. Four work speeds allow you precise control – 0 – 2700 RPM, 0 – 3500 RPM that delivers up to 350 Nm of torque.
Enegitech BLR18B-0001 is compatible with the Enegitech and Makita batteries. The tool will work with 1/4 inch screwdriver heads which are not included. It has a 1/4-inch hex chuck. The brushless motor also has a battery indicator and a work light. There is a metal hook to tuck the tool in your belt while you are climbing the ladder to reach a connecting or rafter. The tool works in a forward or clockwise direction and reverse or anticlockwise direction. The tool has 4 work speeds. There are two working modes – continuous and auto-stop. The voltage output is 18 volts. The tool weighs 2.6 pounds and is made of ABS plastic, steel, and rubber.
Enegitech BLR18B-0001 works at 4 speeds. Speed setting 1 is 0-1000 RPM and 0-1500 IPM at 180 N.m. The 2nd speed setting is 0-1600 RPM and 0-2000 IPM at 230 N.m. The 3rd speed setting is 0-2200 RPM and 0-2800 IPM at 330 N.m. The 4th-speed setting is 0-2700 RPM and 0-3500 IPM, 350 N.m. The tool weighs 2.6 pounds
Enegitech BLR18B-0001 comes with a driver tool, a hook and a manual. The tool is supported by a 2-year warranty.
- Works with 1/4 screwdriver heads
- 1/4 Hex chuck
- Brushless motor
- Reversible direction
15. Werktough D018
Werktough tools are a brand by the Ningbo Youngsun Enterprise. The company was established in 2007 and specializes in tool kits, plastic items, and cordless power tools. They make hand tools, outdoor equipment, and gardening tools.
Werktough D018 is a 12-volt 1300 Ah battery operated drill. It exerts a turning force of 22Nm in the clockwise and anticlockwise direction.The battery charges up in 3 – 5 hours. The life of the battery is long and the tool will last you a long time. Usually, Li-ion batteries last for 500 to 1500 charging cycles. There are 17 torque settings to choose from and 1 position for the drill. The tool is suitable to drill into metal, plastic or wood.
The screw driving jobs will be precise and quick. The no-load speed is 0 – 700 RPM. There is an LED light under the drill chuck that activates automatically while in dim conditions. The drill is lightweight and weighs 2.4 pounds and ergonomically designed. The battery is installed without any effort It is detachable and can be charged using the charger.
Werktough D018 is a powerful cordless drill that has a forward and backward turning force of 22Nm. The Li-ion battery can be recharged up to 1500 times. The brushless motor discretely uses power. This causes the tool, the power, and the battery to last a long time.
Werktough D018 is a 12-volt drill with a 1300Ah battery. Produces a turning force of 22Nm and as a no-load speed of 0 – 700 RPM. The tool weighs 2.4 pounds.
Werktough D018 comes with a charger and a 2-year warranty.
- 17 + 1 settings
- LED work light
- 22Nm torque
- Li-ion battery
This turning collar sets the tool in a drill-driving mode…
You see the icon of the drill bit lined with the marker.This shows there is a direct connection between the motor and the end of the drill. There is no slippage between these aligned parts. If the collar is rotated the hammer icon lines up with the marker. You will get a rotation of the drill and high frequency pounding action. This action facilitates drilling masonry.
The final position at the end of the circular gear is to the right of the hammer setting. It has got numbers on it – 1 – 3 – 5 – which are related to driving screws in the drill driver mode. You can automate this process of driving screws.
Chuck – This is a type of clamp that holds an object with radial symmetry. on a drill, a chuck holds a rotating tool like a bit. There are keyed chucks but the more popular ones are the keyless chucks. To open the chuck rotate it clockwise and to tighten it turn counter-clockwise. The metal prongs tighten around a drill bit or grab the tool you have fitted – do the job. Some chucks produce a ratcheting motion. When you tighten it on to the bit you hear clicks for extra firm tightening. This secures the bit on the chuck.
Motor – This part drives the tool. There are two types – brushed and brushless motor. Look for a brushless motor. Though more expensive they bring you greater power, longer runtime and tool life.
20V Vs 18V Cordless Drills…
A lot of people wonder which drill to buy – 18 volts or 20 volts? From the sound of it – drills fitted with 20V Max batteries seem more powerful. But there are many similarities and differences between these products. 18-volt batteries were thought to give the best performance until the 20V Max batteries were unveiled.
A lot of tests and opinions later the debate on which is better continues. Here is the truth about 18 volt and 20-volt batteries. On taking them apart one realizes that they are designed the same way. They both have single battery cells arranged in groups of five – wired in series.
Each of these groups of 5 cells is wired in a parallel arrangement. This arrangement ensures a larger number of amp hours which gives it a good capacity in terms of watt-hours. When you look closer you will see that they have two different voltage ratings – nominal and maximum.
Each one of these cells in the 18-volt and 20-volt battery has a nominal voltage rating of 3.6 volts. This translates to 18 volts of nominal voltage when put together. Likewise, each cell has a maximum rating of 4 volts that totals to 20 volts in a 20V battery.
In essence, the manufacturers use the nominal rating to produce 18-volt batteries and maximum rating when making 20-volt batteries. This means that both the batteries – 18V and 20V – produce the same amount of power. The only difference is the cell rating, labels, and advertising.
This translates to – a person using 18V batteries gets the same results as using the 20V one. The moot point here is the design of the tools that may be specifically be designed to work with 18V or 20V batteries. Otherwise to get all the power of a 20V tool in an 18V tool.
Features on an 18V Cordless Drills
Type of drill – There are 2 main types – drill/driver and hammer.
The drill/driver is used to drill holes and drive screws into plastic, metal, and wood.
The hammer drill is hammer settings that rock the bit on masonry. As they have to break through concrete, brick, and stone they are heavier than drill-drivers.
There are rotary hammers and impact drivers.
Rotary hammers are heavy-duty versions of hammer drills.
Impact drivers are used for loosening bolts and drive screws. You may get one or both as a part of a kit.
Battery options – f18 volt Li-ion batteries offer a higher range of power and last longer. Having two batteries is productive as when one is down the other can be used. When you are using one the other could be charging. They are more powerful, run longer and stay charged on and off the shelf.
Here is a list of features to consider…
Battery capacity is measured in Ampere Hours (Ah). The larger the battery capacity – 5Ah or more – the longer the runtime.
Battery voltage is measured in volts (V). Usually higher the voltage more the torque produced and better is the drilling performance.
Chuck Size – This is a part pat the tip where the bit is fitted. Usually, there are 13mm chucks to accommodate large bit sizes. There are drills with 10mm chuck sizes too. There are two types of chucks – keyed and keyless. Keyless chucks are preferable as they can be tightened by hand.
Reversible direction – The drill can turn clockwise and anticlockwise. It helps you drill or remove fasteners and screws with a simple change of setting.
The trigger is the speed control on the drill. Most drills have variable speed control – from zero to full RPM. Good control at low speeds is important when driving a screw or drilling a surface. The tool has a range of gears that help you get desired results while doing different tasks on metal, tiles or wood.
Torque Selector/Clutch – prevents the snapping or the overdrive of the screw. It should slip when the turning force gets too high. This stops the drill head from turning. Usually, a tool with a wide range of clutch settings is useful.
Work light – is an onboard LED light that offers illumination in dimly lit or dark spaces.