The Best 20V Cordless Drills in 2020

The Core of A 20V Cordless Drills

The heart of a cordless tool is its motor and its battery. The best 20V cordless drills have a brushless motor and a 12, 18, 24- or 36-voltbattery at their core. You may have noticed that all these batteries have various Ampere-Hour values. For example, you will find a 20V battery with a capacity of 1.5, 3, 4, 5, 6, 9 and 12Ah.

What Is the Relationship Between Voltage and Ampere-Hours?

A battery’s electrical potential is called voltage. It is the measure of the power or energy in the battery. An ampere is the measure of the rate of current or electron flow through the conductor. The conductor is the wire laid into the circuit.

Ampere-hour is the total amount of charge in a battery that allows one ampere of current to flow through the circuit in one hour. In corded tools, it is measured in amperes, i.e., the amount of power drawn by the tool is virtually infinite.

In other words, voltage is the power and ampere-hours are equivalent to the runtime. These two terms come from the battery’s actual capacity – the watts-hours.

Ampere-Hours x Voltage = Watt Hours

If you look at the label of the batteries. The capacity is mentioned in watt-hours. The larger the fuel tank – watt-hours the higher the energy potential.

If you dissect your battery you will see it is made of individual cells connected in series. Each of these batteries delivers a certain voltage. An 18650 battery is a Li-ion cell that is 18mm by 65mm in dimensions. It is slightly larger than the AA battery.

Higher capacity and discharge rate

They are used in laptops, cordless tools, and high drain devices. This is because they have a higher capacity and discharge rate. Typically, an 18650 battery is slightly more than 3.6 volts. In a fully charged state, they produce slightly more than 4V.

There may be anomalies depending upon the tool, temperature of the ambiance, etc. But usually, it means if you need a 12 Volt battery then string three of them in series. If you need an18-volt battery then connect 5 cells.

This means that if you want more power simply add another cell in series. In theory, you will increase the power by 4V. The tool industry has set the standards to 12, 18, 20 and 36V. These standards form the basis of the tool platforms and outdoor equipment.

Increasing in Voltage and Ampere-Hours

Now let us discuss how to increase the ampere-hours on the tool. If you ignore certain factors 3.0 ampere-hour will getyou 3 amperes of current in an hour. Unlike voltage, this is a variable number. You can draw a higher amperage from the battery and get lesser runtime.

This is a linear relationship. You get 2.5 amperes on a 5.0 amp-hour battery and 2 hours of runtime. You can draw 6 amperes from a 3-ampere-hour battery and get only 30 minutes of runtime. Most Li-ion batteries run around 2.0 Ah. You can increase the voltage by connecting the cells in series.

This means if you connect three 3.6V battery in series you get 12V but only 2.0 Ah. To get a higher ampere-hour (Ah) you need to connect them parallel. This means if you connect three 3.6V battery in parallel  you get 3.6V but at 6.0 Ah.

So how to increase capacity and runtime?

Most manufacturers connect the 5 cells in series to get 20 volts. Then they connect another set in parallel. This way we get 20V while the runtime increased to 4.0 Ah. You could add another set in parallel to get 6.0 Ah and so on.

20V batteries seem to be the base unit on which other capacities are built. For example, a 20V Max with 5.0Ah is usually a 5S2P configuration. Here there are 5 cells in series and 2 cells in parallel. This means a total of 10 cells arranged in two sets of 5. If you need a 40V Max at 2.5 Ah then simply change the configuration to 10S or 10 series.

The Anomalies that affect Battery Capacity

In real working conditions parameters like temperature – too hot or too cold. Environmental conditions such as vibrations, etc. affect the Ah and voltage. As these conditions are inevitable at a job site  manufacturers set a better expectation by listing a lower rating. For example – 18-volt nominal instead of 20V Max.

There are advancements and innovations in battery research. People play with the chemistry and physics of the battery. They tweak and tinker with words like cathode, anode, and electrolytes. And you begin to see the difference between impedance, resistance, and other fun words to get better performance. And suddenly an 18 volt and 3 Ah battery can deliver 4 Ah and even 5.

Batteries from different companies deliver different performances. This is due to different safeties, better housing designs, and electronic controls. The change in wiring configuration adds more power, ampere-hours, etc.

Brushless Motors on Cordless Drills

A drills motor is designed to convert electrical energy into mechanical energy. A brushless motor does not have a brush. This elimination of the brush from the motor allows more area for a larger motor. As there is no friction the motor and the tool run cooler. The working principle of brushed and brushless motors is similar.

The windings on the motor become energized. A temporary magnetic field is generated that repels/attracts the permanent magnets. This magnetic force turns the shaft and allows the motor to do work. In the case of a drill, it would be boring a hole. In the case of a driver, it would be turning the screw.

As the shaft turns the electric current is routed through different sets of windings of wire. This maintains the electromotive force of attraction and repulsion and the motion of the motor continues. The benefits of brushless DC motors are improved performance and efficiency. There are little mechanical wear and increased torque per watt.

The tool is more efficient due to higher torque to weight ratio. As there is less wear the tool is low maintenance. The tool has a longer lifespan and quiet. There is no commutator, ionizing sparks or brush erosion. Besides the electromagnetic interference (EMI) is nearly eliminated.

These tools are also smaller, compact and energy-efficient. The current is regulated by the circuit board instead of being delivered directly to the tool. The tool senses the resistance and draws only that much current required to do the work.

Essential Features on The Best 20V Cordless Drills

The features to look for on a cordless drill are…

Voltage – The more the voltage the more powerful is the drill. There are light-duty drills (6 – 12V) for small jobs around the house. There are general purpose drills (12 – 18V) for driving and drilling works and some heavy work. Lastly, the heavy-duty drills (18 – 24V and sometimes 36V) can be used for construction and heavy works like hammering, etc.

Torque – As this is a drill and driver tool it should have a turning force to make holes or turn a fastener. This turning force is called torque. It is indicated in Newton-meters (Nm) or Inch-Pound (in-lbs.). Most drills are made such that they can handle plastics, wood, drywall, etc. Harder materials like concrete, metal and other hard surfaces need less speed and more torque. To work on harder materials, choose a drill with a torque of 46Nm or more.

Power (UWO) is a standard for measuring the maximum power of the drill. It is derived from torque and speed. Thus, the higher these values the higher the torque.

Drive Motor – Brushless motors have circuit boards that help modulate the current, torque, power and ampere-hours. They are quiet and efficient, too.

Features such…

Chuck size – There are 1/4-inch, 3/8-inch, and 1/2-inch chucks. The chuck size determines the type of drill bits the tool can hold.

Batteries – The battery technology had advanced by leaps and bounds. Li-ion batteries with chips carry algorithms that help in the efficient use of power. Ensure you have an extra battery. This way while one is down and charging you are working – using the other. This improves your efficiency and eliminates downtime.

Speeds – Drills can have dual speeds or variable speeds on them. This allows you to work on various materials – hard and soft.

Charger or Charging station – work on the principle of alternating magnetic fields. There are voltage changing batteries available that let you run the tool according to power usage.

Grip – As you are going to be working long hours. Besides, you want to do a precise job. Look for a tool with an ergonomic design and rubberized non-slip grip.

Combo Kits – Many manufacturers offer kits that have a drill and driver. Some may have a hammer attachment while others may carry bits. It is always prudent to pick the tools of your trade as a set as this ensures you have the right sizes.

The Best 20V Cordless Drills

 

The Best 20V Cordless Drills 
DEWALT DCD980M2
DEWALT DCD780C2
PORTER-CABLE PCCK604L2
DCD996B
WORX WX178L
CRAFTSMAN CMCD700C1
CRAFTSMAN CMCK200C2
SKIL PWRCore DL529302
BLACK+DECKER LDX120C
TECCPO TDCD03P
KIMO QM-13809S-T-20
BLACK+DECKER BDCDE120C
TACKLIFE PCD04B
WORX WX176L.9
TACKLIFE PCD04C

1. DEWALT DCD980M2

 

DeWalt is a well-known international brand – by Stanley Black and Decker – that makes power and hand tools for woodwork and construction.

Features

DEWALT DCD980M2 is a powerful 20 Volt cordless drill. The tool is powered by a three-speed motor that runs the drill-driver. It is powered by a 20V, 4.0 Ah battery. The all-metal transmission allows for better speed and better runtime. This is a heavy-duty tool with a 1/2-inch ratcheting clutch with carbide inserts. The hardness of these inserts prevents wear due to vibrations and friction. They also lend a superior grip on the bit. The motor brings you a higher power of up to 535-unit watts along with efficiency. The tool has an LED light with a 20-second delay after the trigger release.

Functionality

DEWALT DCD980M2 is ideal for fastening and drilling applications. It has LED lights that help illuminate dimly lit workspaces. You can work in nooks and recesses as the light will help you see the area and do a precise job. The tool runs on a brushless motor that uses power efficiently. The 20V Max XR Premium Li-ion batteries offer a longer runtime and enhance the tool’s durability. These batteries have 33% more capacity compared to other 20V batteries. There is memory or self-discharge that maximized the productivity to the tool and eliminates downtime.

Specifications

DEWALT DCD980M2 features a 1/2-inch chuck. It has 22 plus 1 clutch settings for precision in work. There are three-speed settings (0-575, 0-1350, 0-2000 RPM) with 535 UWO.

Additional Features

DEWALT DCD980M2 kit includes a Drill-Driver, a One-hour charger, two 20V Max XR Premium Li-ion batteries, a 360° side handle, and a carry box. The tool is supported by a 3-year warranty, 1-year free service and 90-day money-back guarantee.

Highlights

  • Three-speed transmission
  • 535 UWO
  • LED light
  • 1/2-inch carbide chuck

2. DEWALT DCD780C2

 

This is a drill-driver kit with a 20-volt Li-ion battery. It houses advanced technology and innovative features for residential and commercial use.

Features

DEWALT DCD780C2 runs on the 20V Max batteries. These batteries combined with the brushless motor and a 1/2-inch chuck bring you a versatile tool. It will accept a wide range of bits and run at 2 speeds. The two speeds are 0 – 600 RPM and 0 – 2000 RPM applicable to fastening and drilling. The ergonomic handle has a rubberized grip that offers better control over the tool. This is also an Energy Star qualifier that is safe for the environment too.

Functionality

DEWALT DCD780C2 is ideal for homeowners and professionals. The tool is meant for carpenters, remodelers, woodworkers, builders, electricians, etc. The tool offers comfort and flexibility. It has the speed, torque, and power to handle any job. The built-in electronics ensure you get the maximum power running through the tool and battery. The algorithms ensure that the tool does not get overloaded, overheated or deep discharged. The battery will bring you 35% more run time compared to the 18V batteries. The motor brings you 350 UWO of power and superior performance in getting your job done.

Specifications

DEWALT DCD780C2 has a 15-position clutch and 1/2-inch ratcheting chuck. The maximum initial voltage is 20V and the nominal voltage is 18V. There are two-speed transmissions of 0 – 600 and 0 – 2000 RPM.

Additional Features

DEWALT DCD780C2 kit has a drill-driver, two 20V Max 1.5 Ah Li-ion batteries, a 30-minute quick charger, and a contractor bag. The tool comes with the standard DeWalt warranty of 3 years and a one-year free service.

Highlights

  • Compact ergonomic design
  • Two-speed transmission
  • 1/2-inch ratcheting clutch
  • Belt hook

3. PORTER-CABLE PCCK604L2

 

Porter-Cable is an American brand of power tools. They were the first to make the belt sander, the helical drive circular saw and the band saw. The Porter-Cable is a Stanley Black & Decker subsidiary.

Features

PORTER-CABLE PCCK604L2 is a drill-driver with a 1/2-inch chuck. It has a high-performance brushless motor that delivers a 283 UWO. There is are two speeds – 0 – 350 RPM and 0 – 1500 RPM. The tool is compact at 8.25 inches length and weighs only 3.5 pounds. The tool features an ergonomic handle. There are an LED light and bit storage arrangement. There is an impact driver that delivers 1450 inch-pounds of torque. The turning force can be delivered at two variable speeds of 0 – 2800 RPM and 0 – 3100 RPM.

The bit in the chuck can be changed with one hand. The impact driver is only 6.9 inches long and weighs 3.3 pounds. It features an ergonomic handle and an LED light. You can store your bits on this tool too. This way you have access to the relevant accessories while you work. The tool runs on a 20V Max Li-ion battery that delivers 1.3 Ah.

Functionality

PORTER-CABLE PCCK604L2 kit has two tools in it – the drill driver can be used for two purposes. It is used to drill holes in walls, wood, and other materials. The second use is to fit screws and fasteners. Impact drills are used to install and remove screws and bolts. You can drive lag bolts using an adapter too. The PCC681L 20V MAX batteries are Li-ion batteries that do not carry any memory. There is no self-discharge making the charge on them last for a long time.

Specifications

PORTER-CABLE PCCK604L2 is a kit with two tools – a drill -driver and impact drill. The drill driver has a 1/2-inch chuck and is 8.25-inch-long and weighs 3.5 pounds. The impact drill has a 1/4-inch chuck and is 6.9 inches long. There are two 20V 1.3Ah batteries in the kit.

Additional Features

PORTER-CABLE PCCK604L2 is a kit with two tools – a drill driver and impact driver. There are a charger and two batteries. The tool is supported by a 1-year warranty.

Highlights

  • Compact ergonomic design
  • Li-ion batteries
  • High torque
  • Dual speeds

4. DEWALT DCD996B

 

This is a tool only offer by DeWalt. The drill has a brushless motor that runs at three speeds. This tool is a part of the 180 plus product line that accepts the 20V Max Li-ion battery. You can use the battery from another tool in this line to power it.

Features

DEWALT DCD996B has a brushless motor and high-performance transmission. The three speeds find various applications and improve the overall runtime of the tool. The brushless motor will consume less energy as it does not have to overcome friction. This means you get 57% more runtime on this battery. You can use it as an impact tool and get 0 – 38250 BPM for fast drilling of masonry. There are 3 modes of LED light which include the spotlight.

Functionality

DEWALT DCD996B has high efficiency, high power motor built into the tool. It has high runtime and three LED mode that light up the confined spaces 20 times brighter. It has a 20-minute shut off time after the trigger released. The tool as a 1/2-inch ratcheting chuck. It is nitro-carburized for carbide inserts and offers a superior grip on the bits.

Specifications

DEWALT DCD996B requires a 20V Li-ion battery. There is a 1/2-inch ratcheting chuck. The no-load speeds are 0 – 450, 0 – 1300 and 0 – 2000 RPM. You get 820 UWO from the tool.

Additional Features

DEWALT DCD996B is a bare tool and is supported by the DeWalt Warranty of three years. You get a one-year free service and 90 days money-back guarantee.

Highlights

  • 3 – modes of LED light
  • High-efficiency brushless motor
  • Nitro-carburized chuck
  • Compatible with 20V MAX XR batteries

5. WORX WX178L

 

This is the first intelligent drill with an autopilot. There is an automated BitLock that tightens around the bit. The clutch has 30% more hold. This keyless clutch can be hand tightened. Worx believes in the cognification of their tools. They have infused artificial intelligence in their tools to transform use and design.

Features

WORX WX178L has an automated BitLock that tightens around the bit 30% more firmly. The chuck can be hand tightened and the bit centers automatically. The SafeDrive monitors the torque and stops the screw when it flushes with the work surface. This prevents damage to the screw and the work surface. The Pulse Assist prevents the bit from slipping when it hits a hard surface. The drive can be used to remove worn or soft screws. The tool comes with a powerful 20V Max battery that powers this AI drill. The battery can be shared with other tools of this series. There is a trigger-activated LED light that allows you to see in dimly-lit conditions.

Functionality

WORX WX178L is an innovation with Advanced Intelligence Technology. This AI drill brings you the confidence to tackle the project quicker. It carries innovations like BitLock, Pulse Assist, and Safe Drive. These technologies allow you to tighten the bit firmly. This, in turn, helps transfer the torque to the screw or drill through a surface. The smart chip helps the tool to detect how much force is to be applied to the fasteners and drill bits. The tool helps you drill into hard surfaces without slipping on the screw. You can even remove worn screws easily.

Specifications

WORX WX178L brings you a rated voltage of 20V with a no-load speed of 0 – 800 RPM. This is a 3/8-inch chuck with a drilling capacity of 3/8 inches into steel and 1 inch into the wood. The maximum torque is 180 inch-pounds. The machine weighs 2.9 pounds.

Additional Features

WORX WX178L is supported by a 3-year warranty. The kit includes a drill-driver, a Li-ion battery, a battery charger, a double-ended bit and a carry bag.

Highlights

  • Automatic BitLock
  • SafeDrive
  • Pulse Assist
  • Battery share

6. CRAFTSMAN CMCD700C1

 

This is a cordless drill-driver that runs on 20V batteries. These drills are ready to fasten and drill as they come out of the box. They have a brushless motor that helps you handle various tasks and applications. There is a LED that helps you light up the work areas and improve visibility.

Features

CRAFTSMAN CMCD700C1 is a 1/2-inch drill-driver. The cordless tool has a brushless motor that produces 280 UWO for a variety of applications. The tool has a two-speed gearbox – 0 – 350 RPM and 0 – 1500 RPM. These speeds are used for turning screws and drilling through materials. It has a 1/2-inch chuck that does not require tools to change the bits. There is an LED that improves the visibility of the work area. The tool runs on a 20V Max Li-ion battery. It charges up on 60 minutes or less. The tool is compatible with the Versatrack hanging hook.

Functionality

CRAFTSMAN CMCD700C1 is a high-performance tool that produces 280 UWO. This much power is sufficient to complete most tasks such as turning screws and drilling holes. You can fit a great variety of bits in the 1/2-inch chuck. The tool can be used in two speeds – 0 – 350 RPM and 0 – 1500 RPM. With the right bits and accessories, you can use it to mill and polish surfaces. There is an LED light just under the impact arm of the tool that illuminates without shadows. After the job is done – simply hang the tool with the belt hook.

Specifications

CRAFTSMAN CMCD700C1 is 2.67 pounds in weight. It is 9.37 inches by 2.87 inches by 8.35 inches length, width, and height. There is a 1/2-inch chuck and 23 plus 1 clutch setting and two speeds – 0 – 350 RPM and 0 – 1500 RPM and 280 UWO. The 20V Max battery will deliver 1.3 Ah of power.

Additional Features

CRAFTSMAN CMCD700C1 kit has a drill-driver, a double-sided bit, a 20V Max Li-ion battery and a charger. There are a user manual and a 3-year warranty.

Highlights

  • 280 UWO
  • Two speeds
  • Keyless chuck
  • LED light

7. CRAFTSMAN CMCK200C2

 

CRAFTSMAN is a brand of power tools, hand tools, and equipment for gardening and lawn. The company was established in 1927 and had kept up its reputation through good quality goods.

Features

CRAFTSMAN CMCK200C2 has a powerful motor with 280 UWO of power sufficient for fastening and drilling. The drill driver has two speeds – 0 – 350 RPM and 0 – 1500 RPM that is ideal for most applications. The impact driver offers 1460 inch-pounds of torque at 2800 RPM and 3100 BPM that is ideal for fastening and other heavy-duty tasks. It is easy to change the chuck – as it is a one-hand operation. There is an LED that improves visibility on both the units. The tool has a compact design and an overmold that allows you to work in narrow tight spaces.

Functionality

CRAFTSMAN CMCK200C2 is a drill driver that works in 20-volt Li-ion batteries. This drill-driver is ideal for fastening and drilling purposes. It has a dual speed and a 1/2-inch chuck. It produces up to 280 UWO of power required for heavy-duty jobs. There is a 1/4-inch impact driver with the maximum torque rating of 1450 inch-pounds to drive larger fasteners. You can insert the bit with one hand and it will center itself automatically. The tool is light and has a rubber over-mold that prevents it from slipping or causing fatigue. The two tools are accompanied by batteries, a charger, and accessories. All these can be hauled in a carry bag that also keeps them together.

Specifications

CRAFTSMAN CMCK200C2 has a two-speed motor that produces 0 – 350 RPM and 0 – 1500 RPM. It has a 0.5-inch chuck size. The tool comes with two Li-ion batteries of 1.3 Ah at 20 volts.

Additional Features

CRAFTSMAN CMCK200C2 kit includes one CMCD700 Drill-Driver, one CMCF800 Impact Driver and two V20 20V MAX* Lithium-Ion Batteries. There is a V20 20V MAX Lithium-Ion Charger, a PH No. 2 Bit, a double-sided bit and a storage bag. The tool is supported by a 3-year warranty.

Highlights

  • Brushless motor
  • 2-speed gearbox
  • Drill driver & impact driver
  • LED light

8. SKIL PWRCore DL529302

 

Skil is a power tool brand from Germany. The company was established in 1926 and makes professional-grade tools under the subsidiary SKILSAW. SKIL PWRCore line consists of brushless motors and battery innovation.

Features

SKIL PWRCore DL529302 is a kit that includes a Li-ion battery a USB port and a charger. The tool has dual speed – High and Low. The low speed is ideal for fastening applications and the high speeds facilitate drilling. The bit in the chuck can be easily and quickly replaced. This is a single-sleeve metal chuck that allows you to change the bit without a key. The tool has a digital brushless motor that transmits power efficiently. It has a long-run battery life that has the 20V Li-ion technology at its core.

This technology keeps the battery cool this increases the runtime by 25%. It also extends the battery life by two times. If you require power on the go the USB port can be used. The automatic PWR Jump charges the battery in 5 minutes. You will have a full charge in 30 minutes.

Functionality

SKIL PWRCore DL529302 is a powerful drill that can be used with confidence on a variety of materials. It has a brushless motor that is powered by a 20-volt, 2.0 Ah battery. The 1/2 – inch single sleeve chuck has 17 plus 1 torque settings. The battery can be charger up quickly using the PWR jump charger. You will get sufficient power to drive 100 screws in a charge up of 5 minutes. It will be fully charged in 30 minutes. This drill driver is ideal for precise drilling tasks the motor will deliver up to 450 inch-pounds of torque. You can change bits quickly and easily from the 1/2-inch metal chuck. The battery is wrapped in thermal material that keeps the battery cool. This causes the batteries to run 25% longer and last twice longer.

Specifications

SKIL PWRCore DL529302 weighs 5.05 pounds. It is 7.2 inches by 2.9 inches by 7.7 inches in dimensions. The tool produces a torque of 450 inch-pounds with a variable speed of 0 – 450 and 0 – 1800 RPM. There are 17 plus 1 clutch settings.

Additional Features

SKIL PWRCore DL529302 drill-driver is accompanied by a 2.0 Ah battery, a charger, a belt clip, a battery jacket and a PH2 drill bit. The unit is supported by a 5-year warranty.

Highlights

  • Quick charge Li-ion battery
  • LED light
  • Brushless motor
  • 17 + 1 clutch settings

9. BLACK+DECKER LDX120C

 

BLACK+DECKER makes power tools. hand tools, lawn and gardening accessories, cleaning equipment and other innovations. These tools are designed and directed towards bettering your lifestyle.

Features

BLACK+DECKER LDX120C tool comes with and Li-ion battery that is already charged. The battery holds the charge for up to 18 months. You gain better control of your work through this tool as there are 11 clutch settings. This prevents the tool from overdriving or stripping the screw heads. The LED lights up your workspace and helps you drill holes in dark spaces. The tool is lightweight and compact this gives the user better dexterity and maneuverability. As this tool is a part of the 20V Max tool – the battery can be used with other tools and vice versa.

Functionality

BLACK+DECKER LDX120C is a powerful drill- driver. The tool is run using a 20V Max cordless battery and a brushless motor. The tool has 11 positions on the clutch that help gain precise control over operations. The compact and lightweight design help work in tight spaces. The LED light illuminates the recesses. This is an all-purpose tool that holds a variety of bits in place.

The keyless chuck accepts a wide variety of hex bits making this a versatile tool. At low speeds, you can use it to drive screws and fasteners. At high speeds, you can use it to drill various types of materials. The 20V batteries power heavy-duty tools with brushless motors.

Specifications

BLACK+DECKER LDX120C has a 3/8-inch chuck and 11 clutch settings. The tool offers 0 – 650 RPM at 150 watts and 20 volts. The tool is 10.6 inches by 8.5 inches by 3.7 inches in dimensions. It weighs 3.4 pounds.

Additional Features

BLACK+DECKER LDX120C kit has a drill-driver, a Li-ion battery, the charger and a double-ended bit. The tool carries a 2-year warranty.

Highlights

  • 11 clutch settings
  • 20V Max Li-ion battery
  • Variable speed
  • Ergonomic design

10. TECCPO TDCD03P

 

TECCPO believes that technology empowers. They believe you should prime your tools before handling the project. This ensures success. Thus, they bring you these innovative and primed tools for use in and around your home and job site.

Features

TECCPO TDCD03P has been optimized for performance in each part. There is a single sleeve chuck with a keyless all-metal automatic spindle lock – A high-low two speed setting of 0 – 450 RPM and 0 – 1700 RPM and a forward and backward button to turn the spindle in a clockwise and an anticlockwise direction also has a work light. This LED on the base improves visibility by illuminating the work area.

A real-time power indicator that informs you about the battery level. There is a variable speed trigger that offers precise control over your job. There are two 2.0 Ah Li-ion batteries and a fast charger. The circuits have chips embedded with algorithms that protect the system.

Functionality

TECCPO TDCD03P comes with a 2000 mAh Li-ion battery and a fast charger. This means you will be constantly powered with no downtime. The tool has excellent temperature management that will ensure you don’t have t rest the tool to cool down. It produces a turning force of 530 inch-pounds at variable speeds over 24 plus 1 clutch settings.

This delivers 150% precision over the variable speed transmission of 0 – 450 RPM and 0 – 1700 RPM. These speeds are ideal to work on plastics, metals, and wood. There is a 4-pole copper motor that brings 25% more stability to the operation. The 1/2-inch keyless ratcheting chuck is for maximum compatibility and durability.

Specifications

TECCPO TDCD03P is a drill-driver. It comes with two 20V Li-ion batteries that take 60 minutes to charge up. The no-load speed is 0 – 450 RPM and 0 – 1700 RPM with a maximum torque of 530 in-lbs. The 1/2-inch chuck size has a torque setting of 24 plus 1.

Additional Features

TECCPO TDCD03P kit arrives with the drill, two Li-ion batteries and a 60 minutes fast charger. There are a belt hook and a 33-piece accessory kit. The unit comes with a storage bag, a user manual, and a 2-year warranty.

Highlights

  • Replaceable battery packs
  • Variable speed
  • Dual speed adjustment
  • Multifunctional

11. KIMO QM-13809S-T-20

 

This tool is meant for basic hammering and drilling of walls and bricks. The brand was established in the 1990s. IT has grown from a small workshop into a global enterprise. The company has researched, designed and developed tools for the last 25 years. And served the remodelers, electricians and other professionals well.

Features

KIMO QM-13809S-T-20 runs on a 2.0 Ah Li-ion battery that charges up quickly in an hour. There is a built-in LED light that lights up dark places for you to do a precise job. The 3/8-inch keyless chuck accepts most bits. You simply have to turn the bit in the chuck a few turns to get a firm fit. This is a three in one tool that hammers, drives and drills. It has a 21 plus 1 plus 1 adjustable clutch. The variable trigger helps you control the turning force and precision of the tool. There are a reverse and forward control that helps fix and remove fasteners.

Functionality

KIMO QM-13809S-T-20 is a hammer, drill, and driver. Just behind the 3/8-inch chuck is a 21 plus 1 plus 1 adjustable clutch. This clutch helps you adapt it in low torque applications such as furniture assembly. It can be set to high torque for boring large holes into wood etc. The variable speed trigger is for precise control over the tool and torque. The tool has a reverse and forward control that can turn the chuck in the clockwise and an anticlockwise direction to secure or remove the fasteners.

Specifications

KIMO QM-13809S-T-20 has a 20-volt battery with a charging time of 1 – 1.5 hours. The battery capacity is 2.0Ah. The 3/8-inch chuck has two no-load speeds of 0 – 350 RPM and 0 – 1350 RPM. The adjustable torque setting is 21 + 1 + 1. The tool weighs 4.8 pounds. The dimensions are 13.5 inches by 6.4 inches by 7.2 inches.

Additional Features

KIMO QM-13809S-T-20 kit consists of a 1000-cycle battery, a 60-minute Fast Charger, and a 330 Inch-pound Hammer-Drill-Driver. There is a carrying case, a flexible drill shaft, and 33 screw-driving bits. There are six twist drill bit, three brad-point drill bits and a user manual. The tool is supported by a 24-Month warranty.

Highlights

  • Produces 330 inch-pounds of torque
  • Hammers, drills, and drives screws
  • Keyless chuck
  • 21 + 1 +1 clutch operations
  • Variable speed

12. BLACK+DECKER BDCDE120C

 

You can drive more screws using this Li-ion drill. It will work on a variety of materials like wood, metal, and plastic. The tool has the AutoSense technology that will prevent you from stripping the screws. There is an LED light to light up the workspace.

Features

BLACK+DECKER BDCDE120C is a compact drill that works on battery power. The tool senses the hardness of the surfaces and drives the screws accordingly. Using this tool most screws will flush on the first try. The batteries do not have a memory effect nor do they discharge. They hold the charge for up to 18 months. There is an LED work light on the tool that comes on when the trigger is pressed. This means if you are working under the rafters or the sink you will be able to see the work area. The tool is a part of the 20V Max system this means batteries from other tools can be used with this one and vice versa.

Functionality

BLACK+DECKER BDCDE120C will drill through metal, wood, and plastic. The screwdriver can be driven through wood, plastic, and metal. The automatic drill is three times more sensitive than the mechanical clutch. The AutoSense has two modes – drill and driver mode. The microprocessor in the driver mode measures the tool’s performance continuously. This is because as the screw enters the material the torque profile changes. This change is analyzed and the chip changes the application of the turning force within milliseconds. This gives you precise results.

Specifications

BLACK+DECKER BDCDE120C has a 3/8-inch chuck size and it turns at 0 – 800 RPM.

Additional Features

BLACK+DECKER BDCDE120C drill-driver comes with a 20V Max Li-ion battery, a charger and a double end bit.The tool comes with a 24-month warranty.

Highlights

  • Powered by a Li-ion battery
  • Cordless & automatic
  • LED light
  • AutoSense technology

13. TACKLIFE PCD04B

 

Tacklife wants you to imagine the power to bore through anything. Simply press the trigger with your index finger and you get the job done. Imagine not being restrained by a heady cord for power. Imagine being able to drill and screw with a powerful yet light tool.

Features

TACKLIFE PCD04B is powered by a 2000 mAh Li-ion batteries. The tool has three modes – hammering, drilling, and driving screws also has two speeds  0-450 RPM for screw driving and 0 – 1600 RPM for drilling and has a torque adjustment clutch with 16 plus 3 settings. The smart adjustments let you control the moment such that it does not strip the screw. The battery has a fast charger. There is a 1/2-inch auto-lock metal chuck that is 310 inch-pounds. There is a built-in LED light for better visibility.

Functionality

TACKLIFE PCD04B has a self-locking chuck. It is a single sleeve, keyless chuck that has an automatic spindle lock. There are three positions – fully open or 1/2 inch, half-open and closed. It will accept various types of drill bits in these positions. There are two-speed adjustments on the top of the tool – Air vents at the back to keep the tool cool. A forward and reverse switch that allows the chuck to turn in a clock or anti-clockwise direction to tighten or loosen screws.

The underside of the tool has an LED that lights up a dimly lit place for better sight. There is a clutch with 16 plus 3 torque settings. The trigger can be pulled to induce variable speeds. The ergonomically designed non-slip grip in the tool prevents slippage.

Specifications

TACKLIFE PCD04B has a 2000 mAh battery. It has a 1/2-inch chuck and 16 plus 3 clutch positions. It has two-speed settings 0 – 450 and 0 – 1600 RPM.

Additional Features

TACKLIFE PCD04B kit has a driver drill that comes with a 43-piece set of drill bits, belt hook, an extra battery, carry pouch, etc. The tool comes with a 24-month warranty.

Highlights

  • Large battery
  • Quick charger
  • Large turning force
  • Three modes

14. WORX WX176L.9

 

WORX is a Chinese company from China that makes gardening and lawn tools and implements it besides power tools. The tools work on 20V batteries. The switch driver is a unique ergonomic design.

Features

WORX WX176L.9 is a switch driver or a two in one cordless driver and drill. There is a rotating head with dual chucks and dual-speed motor. The tool delivers precise torque control. The rotating head helps switch between heads quickly. Both the heads have precise torque controlled by electronic circuits. The electronic transmission has two speeds that tackle drilling and driving. This also prevents the screws from stripping and breaking. The 1/4-inch hex chucks help change the tools at the press of a button. It is easy to change the bits. The maximum drilling capacity is 3/8-inches. There are two Li-ion batteries of 20 volts. The tool has sufficient power to do all your tasks around the yard and home.

Functionality

WORX WX176L.9 gets your work done quickly and smoothly. You will enjoy your DIY work and projects around the house. The tool is a 2 in 1 cordless driver cum drill. There is a switch driver that accommodates 1/4-inch chucks. The head turns through 180° using a push button. The unique dual-chuck design switches you effortlessly between driving and drilling. You don’t have to pause to change the bit. There are 1/4-inch hex bits that load both the chucks. You can drill then press the button to switch to the other driving chuck at a press of a button.

Specifications

WORX WX176L.9 kit has 5 pieces. The tool is 2.5 pounds and 9 inches by 8.5 inches by 3.5 inches in dimensions. There is a 20-volt Li-ion battery that produces 1500 RPM at 500 watts and 120V. The head accommodates 1/4-inch chucks that rotate through 180.

Additional Features

WORX WX176L.9 kit has a switch driver, drill and driver, a 1/8-inch drill bit, one 3/32-inch drill bit, and a number 2 Philips driver bit. The tool comes with a 24-month warranty.

Highlights

  • Power Share battery
  • Switch driver
  • Drill-driver
  • Two speeds
  • Rotating chucks

15. TACKLIFE PCD04C

 

This offer by TACKLIFE is a 20-volt cordless drill It runs on Li-ion batteries. It not only drives screws, drills but also hammers. It has a 1/2-inch auto-locking chuck and an LED light.

Features

TACKLIFE PCD04C is powered by a 2000 mAh Li-ion battery. The tool has three modes – drilling, driving screws, and hammering also has two speeds – 0 – 450 RPM for screw driving and 0 – 1600 RPM for drilling and a torque adjustment clutch with 16 plus 3 settings. The smart adjustments let you control the moment such that it does not strip the screw. The battery has a fast charger. There is a 1/2-inch auto-lock metal chuck that is 310 inch-pounds.

Functionality

TACKLIFE PCD04C has a self-locking chuck. It is a keyless chuck that has an automatic spindle lock. There are two-speed adjustments on the top of the tool. There is a forward and reverse switch.

Specifications

TACKLIFE PCD04C has a 2000 mAh battery. It has a 1/2-inch chuck and 16 plus 3 clutch positions. It has two-speed settings 0 – 450 and 0 – 1600 RPM.

Additional Features

The tool comes with a 12-month warranty.

Highlights

  • Large battery
  • Quick charger
  • Large turning force
  • Three modes

Related posts

error: Content is protected !!