What is Brushless?
Initially, drills had motors with four parts – the carbon brushes, armature, magnets, and commutator. They all work in tandem with each other to operate the drill. Brushless motors have a slightly different design. They do not have the commutator and carbon brushes. This eliminated friction between parts extending their life and generating less heat.
Working of The Brushless Drill
A brushless drill has four parts – commutator, armature, magnets and carbon brushes. The movement of these parts produces a drilling motion. When the trigger is squeezed it sends an electric current from the battery to the carbon brushes.
These brushes are spring-loaded into the commutator. The charge is then passed on to the armature with copper windings. The armature is situated next to the magnets. The armature is charged by the current from the battery.
The magnet carries an opposite charge compared to the copper windings on the armature. These opposite charges collide to turn the motor. This keeps the drill functional until the power is on. Brushless motors function differently as they have only the magnets and armature.
Best Brushless drills have…
The carbon brush and commutator are eliminated. When you squeeze the trigger, the charge goes from the battery to the armature via a circuit board. This makes a noiseless, quick and smooth connection. Brushless drills have motors with controllers.
These controllers transform DC into a three-phase variable frequency current. The motor coils generate a rotational field due to this current. There is a fixed stator with coils and a mobile rotor with permanent magnets. This arrangement produces 10000 RPM in the motor.
These motors are complex due to their unique design. The larger the number of rotors the higher the torque produced.Three control algorithms operate the brushless motor. They are the vector or field-oriented, a trapezoidal and sinusoidal commutation. The control algorithm is the combination of hardware, i.e., the circuitry and the control software. The software is the program that operates the motor.
Brushless drills Versus Brushed
Depending on your application requirements you may be able to gain additional efficiency by choosing either a brushed or a brushless motor. Brushed motors have simplified wiring. They can be wired directly to DC power and control can be as simple as a switch.
They are also less expensive than brushless motors. However brushed motors are less efficient. The switching action of the commutators constantly makes and breaksinductive circuits that make electrical and electromagnetic noise.
Brushes and commutators also wear out due to being in perpetual physical contact with the shaft. On the other hand, brushless motors tend to have a longer lifespan as they have no brushes to wear out. This also means there is less maintenance required as there are no brushes to replace.
They are also more efficient than brushed motors, typically featuring 85-90% efficiency compared to 75 – 80% of brushed motors. This difference in efficiency means that more of the total power used by the motor is being converted into rotational force rather than being lost as heat.
However brushless motors have a higher initial cost as they require a commutating device such as an encoder and a drive or a controller.
Benefits of best Brushless Drills
These drills have a brushless motor that makes the transition easier. These drills can sense the material better thus a better investment. When it comes to regulardrills, they treat all materials with the same force. But the brushless drills can differentiate the levels of hardness.
It is the circuit board that makes all the difference. The motors communicate with the armature via these circuit boards. They allow the tool to calibrate the power required to do the task. It controls and minimizes the power consumed. This controlled output also prolongs the life of the tool.
Brushless drills are stronger…
Brushless drills are stronger because their design is built up in the motor area, unlike the brushed ones. This makes them more powerful, quieter and long-lasting.
They are compact and smaller than the brushed drills and weigh less without sacrificing power. There are fewer breakdowns as there are no brushes and parts that wear out. As there is no friction they do not overheat. The overall design extends the life of the motor.
The brushless motors circuitry modulates the power via sensor. It modulates the power requirement depending on the material’s resistance. This feature conserves power and is the basis of the cordless drill design that runs on battery.(we have also written a comprehesive guide about the finish and brad nailers ).
The permanent magnets on the rotor, the copper windings on the stator and the circuit boards work together to produce higher speeds. The work is done and the battery power used is 10 – 20% more efficient.
Features on A Brushless Drills…
Here is a checklist of essential features on a brushless drill.
Voltage – The power of the drill is indicated by its voltage. The higher the voltage indicated the more powerful is the drill.
Heavy-duty drills – Drills with 18 – 24-volt batteries are brawnier than the others. They bore holes through thick boards and drive large fasteners. They are fitted with 1/2-inch chucks and accept most drill bits to work on concrete blocks and bricks. These are the heaviest and the most expensive.
General-purpose drills – Drills with 12-volt batteries are powerful. They can drill holes through wood and drive a pouchful of screws on a single charge.
Light-duty drills – Drills with 6 – 12 volts are classified in this category. They are ideal to change a light fixture, drill drywall, assemble flat-pack furniture, etc. They have relatively small motors thus do not drive with the same power as the big brothers. The other limitation is that they have fixed 1/4-inch sockets that accept only 1/4-inch hex bits. Yet they are useful to have around the house.
Torque – It is the twisting force a drill can apply on a work surface. It is measured in Newton-meter (Nm) or pounds. Usually, the voltage rating indicates the total power of the drill. If you are working on wood or plastic you don’t need to worry, as most drills are calibrated to work on these surfaces. However, if you are working on metal, concrete, vitreous tiles you may need more speed and torque.
Power UWO – Look for the Unit watts Out – this is the new standard to measure the maximum power of the drill. It is the combination of torque and speed. This translates to – higher the UWO the more the power of the drill.
Drive motor – Pick a brushless motor as you can modulate the power, pressure, and torque. And it drives longer without getting overheated.
Chuck size – This is referring to the size of the drill chuck. It indicates the size of the bit or the diameter of the bit shank that would fit the drill. The usual sizes available are 1/4-inch, 3/8 inch and 1/2-inch bits.
A 1/4-inch chuck would do nicely as a light-duty driver.
The 3/8-inch drill accommodates a variety of drills and ideal for work around the house.
The 1/2-inch drill is meant for heavy applications.
Speeds – You can control the speed or the RPM on the drill. It brings you the flexibility to work on different materials.
Dual speed drills are inexpensive and usually have a speed of 3000 RPM. Some models may have two speeds – one for driving screws and the other for drilling.
Variable speed drills have an adjustable clutch that offers versatility to work with different materials and bits. You can use them on softwood, metal, hardwood, and masonry. All these materials require different torques and speeds. When you work on hard materials you will require low speeds, larger bits, and more torque. When you work on softer materials you need higher speeds, smaller bits, and low torque.
The trigger of the drill controls the speed.
The clutch can be set to the desired torque. An adjusted clutch prevents you from driving the screw too deep. This also prevents the possibility of striping the head of the screw or snapping it.
The gearing switch allows you to set the drilling gear to high torque and low speed or vice versa.
Keyless clutches – Some drills have clutches with keys. These are required to loosen or tighten the bits. There are keyless chucks that can be tightened or loosened by hand. If you change bits frequently – keyless chucks are ideal.
Batteries – Most drills have a detachable Lithium-ion battery. They are supplemented by an extra battery that prevents a break in the work schedule. There are voltage-changing batteries that run the tool according to your power usage. This way the charge lasts longer and so do the batteries. Some manufacturers make tools where the batteries are interchangeable.
A charging stations an inductive charging dock. It works on the principle of alternating magnetic fields to charge the tool.
Other features such as a built-in light and level help install fasteners quickly. An adjustable side-handle helps gain a better grip on the tool. Some manufacturers complement the drills with bits and other accessories.
TOP 15 BEST BRUSHLESS DRILLS IN 2020
DeWalt is an American brand of tools that is known and used worldwide. Their tools are used for woodwork, manufacturing, and construction. They are a subsidiary of Stanley Black and Decker. This tool is a part of the 20V MAX line of tools. It combines superior ergonomics, brushless motors, and high capacity Lithium-ion battery packs to deliver unparalleled performance.
DEWALT 20V MAX XR is a part of an impact and drill driver combo kit. The 1/2-inch hammer drill DCD996 has three speeds ranging between 0 – 2250 RPM. It has an all-metal transmission that optimizes the tool to task application speeds. This, in turn, improves the runtime. The length of this drill from front to back is 8.4 inches. It weighs only 4.7 pounds – can hammer 0 – 38250 BPM for quick drilling on masonry material exists three modes of LED light that light up dark and confined spaces.
This improved model illuminated 20 times brighter. There is a 1/4-inch impact drill DCF887 which offers 1825 pounds. It offers maximum torque at a variable speed of up to 3250 RPM. It can deliver 0 – 3600 impacts per minute. The length from tip to tip is 5.3 inches and it weighs 3.4 pounds. The kit includes a high capacity of 5.0 Ah Lithium-ion battery from the 20V Max series. The maximum initial voltage without a workload is 20 volts while the nominal voltage is 18 volts.
DEWALT 20V MAX XR is a hammer drill and impact driver kit. It is meant for fastening, drilling and hammering applications. The compact drills are lightweight and allow you to get into tight spots. The 3 intensities of LED to illuminate the workspace. There are two batteries for the two drills.
DEWALT DCK299P2 has a DCD996 hammer drill and DCF887 impact driver. The kit contains two 5.0 Ah batteries and a charger.
DEWALT DCK299P2 kit includes the three-speed hammer drill, an impact drill, two Li-ion batteries, and a charger. There are two belt hooks, a 360° side handle and a kit box. The tool is supported by a 3-year warranty, 1-year free service and 90-day money-back guarantee.
- Compact size
- Drill & hammering kit
- 3-mode LED
- Excellent ergonomics
Milwaukee was founded in 1924 to produce power tools. The brand makes power tools for homeowners and professionals. They produce 145 plus tools in the M18 series using18 volt batteries. There are 75 plus tools in the M12 series using the 12-volt batteries. This tool belongs to the M18 series.
Milwaukee 2701-22CT is optimized for efficiency as it has 50% more runtime. The brushless motor brings it twice a longer life. The tool offers 56.4924 Nm of torque. It offers variable speeds of 0-400 RPM and 0-1,800 RPM. The Tool has the REDLINK intelligence that offers advanced overload protection against abusive applications. The feature monitors the temperature of the tool preventing damage maximizing battery life and tool performance. The compact design is balanced and offers good support while working in tight spaces and overhead applications. The Red Lithium battery has superior construction and electronics. There are a metal gear case and a 1/2-inch metal chuck for durability and impact resistance.
Milwaukee 2701-22CT is an 18-volt drill-driver with a 1/2-inch chuck. The drill offers 50% more runtime due to the brushless motor. The REDLINK Electronics and motor are powered by REDLITHIUM batteries for efficient power delivery. The tool is 6-7/8-inch-long and 3.7 pounds for easy handling. The drill offers excellent control and balance along with compact size. The tool is small and well balanced to allow accuracy in overhead work and tight spaces. The drill brings you the 500 inch-pounds of torque at two speeds – 0 to 450 and 0 – 1800 RPM. The tool finds a wide range of applications in fastening and drilling. The tool has a 1/2-inch chuck for easy change of bits. You can carry all your tools and accessories in the carrying case.
Milwaukee 2701-22CT is 9.38pounds and 14 inches long, 16 inches high and 6 inches thick.
Milwaukee 2701-22CT kit has a 1/2-inch Compact brushless drill cum driver, two red Li-ion battery, a multi-voltage charger, and a carrying case.
- Compact design
- Brushless motor
- Efficient Li-ion battery
- 1/2-inch metal chuck
This tool is part of the cordless tool series by DeWalt. It used the 20-volt Max series of batteries. This drill cum driver has three speeds.
DEWALT DCD991B is a high power, high-efficiency tool with three speeds up to 2000 RPM. The brushless motor delivers 57% more runtime due to the all-metal transmission. The lack of friction improves the runtime. There are three modes of light produced by LED lights. The illumination is 20 times brighter from the previous model. The battery has 33% more capacity than standard ones. There is a 1/2-inch ratchet with a nitro-carburized metallic chuck. It is stronger and harder due to the carbide inserts on the bits. The LED spotlight has a 20-minute shutoff time that lets you finish your work.
DEWALT DCD991B is a powerful yet quiet drill due to the brushless motor. It turns through 2000 RPM at three speeds. The transmission enhances the tool to task the application of speed and torque for improving runtime. You can change the bits to work on various surfaces. It has a 1/2-inch chuck for tough inserts. There is a three LED mode that is 20 times brighter due to excellent LEDs and a 33% powerful Li-ion battery.
DEWALT DCD991B uses a Lithium-ion battery of 20 volts. the tool has 3 speeds between 0 – 2000 RPM. The tool is 4 inches wide, 9 inches long and 8 inches high.
DEWALT DCD991B tool comes with a brushless tool a belt hook and a 360-degree side handle. The tool is supported by the 3-year warranty by DeWalt.
- Brushless motor
- Three modes of LED light
- 33% more powerful battery
- Fuel gauge
Porter-Cable is an American company that makes power tools. They pioneered the belt sanders, the portable band saw and helical drive circular saw. This company is a subsidy of Stanley Black and Decker.
PORTER-CABLE PCCK619L2 is a kit with two tools. The drill and impact driver has a high-efficiency motor. They have a two-speed transmission that offers the right speed for drilling and fastening tasks. the tip to tip length is 8 inches and weight, only 3.2 pounds. The brushless motor offers 50% more runtime. The maximum speed is 270 RPM and torque is 1400 inches-pound.
PORTER-CABLE PCCK619L2 is ideal for heavy-duty applications minus the stalling. The drill is only 8 inches from tip to tip. The impact driver is only 5.58-inches and weighs only 2.9 pounds. The compact size of both tools allows you to reach into the tight spots. The professional-grade Li-ion batteries bring you maximum performance.
The mode collar lets you switch from the fastening to drilling mode and vice versa. You can engage this feature without losing the clutch setting. There is a 1/4-inch quick change hex for a one-hand change of bits. The drill can be used to make holes and drive fasteners. The machine can be used to hammer, drill, fasten depending upon the bit in the chuck. The main purpose of the impact driver is to fix large fasteners such as long screws, lag bolts, etc.
PORTER-CABLE PCCK619L2 has a 1/2-inch drill-driver with 370 UWO. It has a 2-speed transmission with 450/1 and 800 RPM. The fastening speed is 0 – 1700 RPM. The impact driver has a 1/4-inch head and offers 1400 inch-pounds of turning force at 2700 RPM.
PORTER-CABLE PCCK619L2 is a kit with the drill, impact driver, two chargers and one Li-ion charger. The tools are supported by a 2-year warranty.
- Brushless motor
- 1/2-inch drill
- 1/4-inch impact driver
- Two Li-ion batteries
Bosch is a German Engineering firm that offers consumer goods, mobility solutions, industrial technology, etc. This is a drill and driver Kit with a brushless motor.
Bosch GSR12V-300B22 kit has an efficient drill-driver design that offers a professional level of torque. The drill head is 3/8 inches and the tool is light. The head has a keyless chuck that accepts bits for drilling and driving. There are 20 plus 1 clutch settings for accuracy and control over driving fasteners exist an LED that illuminates the dimly lit workspace – two transmission speeds of 0 – 460 RPM and a high-speed setting of 1750 RPM.
Bosch GSR12V-300B22 is a 12-volt 3/8-inch drill cum driver. This is a professional-grade tool with an efficient EC brushless motor. The motor spins at 1750 PRM and delivers 300 inch-pounds of torque. The head length is 6 inches and the tool weighs only 1.6 pounds minus the battery. There is a 2- speed transmission and 20 + 1 clutch setting for precise driving of screws. There is a three-jawed keyless chuck to hold the accompanying bits. The tool has LED lights that light up the dark areas so that you can do a precise job. As there are two batteries, you can work uninterrupted. When one is down – fit in the other battery and continue your work while the depleted one recharges.
Bosch GSR12V-300B22 is a 3/8-inch drill- driver that works on 12-volt Lithium-ion batteries. It comes with a complementary 12-volt charger. The tool is 7.2 inches high, 2.1-inch-wide and 6 inches long. It produces 300 inch-pounds of torque and has two variable speeds.
Bosch GSR12V-300B22 kit contains a brushless drill-driver. There are two, 2.0 Ah, 12-volt Lithium-ion batteries. There are a 12-volt charger, one magnetic four-tip bit-holder, and four impact bits. The kit also includes a belt clip and carry bag.
- Four tip bit holder
- Four impact bits
- Belt clip
- Brushless motor
Kobalt is a brand owned by Lowe. Lowe is a home improvement chain that sells power tools, mechanical tools, and tool storage products. The tool is perfectly balanced in power and ergonomics. This tool has a state-of-the-art brushless motor that is powerful and durable. The tool will perform between -4 to 140°F in the toughest working conditions.
Kobalt KDD 1424A-03 has a gear selector that helps you set a low speed at increased torque. It is ideal for heavy-duty work like driving screws also allows you to set high speeds at reduced torque to drill composites, woods, and other surfaces and can be used for polishing and abrasive accessories too. There is an adjustable torque clutch with one drilling and 23 driving settings. You can select one according to the fastener, material or type of bit. There is a direction of rotation selector that allows you to set the position to forward, reverse or center using a pass-through push switch. The tool works on a 24-Volt Li-ion battery pack that is 50% more powerful and offers 3.6 times extra runtime than the 18-volt tools. This means you can get your job done quicker.
Kobalt KDD 1424A-03 is an excellent tool for drilling and driving screws and fasteners. The tool includes the battery. Even though the kit has only one battery the benefit is that it can be exchanged with other Kobalt tools. The weight and design of the tool are compact and ergonomic. It can be handled easily in dark and dimly lit places. As the tool is balanced and lightweight it can be used overhead and in cramped spaces. There is an LED light to illuminate the workspace. The clutch allows you to control the speed while working on materials of different densities.
Kobalt KDD 1424A-03 is a 1/2-in cordless drill cum driver. It works on a 24V Max 2.0Ah Li-ion battery. The brushless motor delivers 650-inch-pounds of torque. It has a 2-speed gearbox with 2 variable speed ranges – 0-550 and 0-2000 RPM.
Kobalt KDD 1424A-03 is supported by a 5-year warranty on the tool and 3-year warranty on the battery. The kit comprises the drill cum driver, a 24 Volt 2.0Ah Li-ion battery, charger, bit holder, double-ended bit, an auxiliary handle and a soft carry bag.
- 650 in-lb. of torque
- Li-ion battery
- 2-speed gearbox
- 50% more power
Hitachi is a part of the Mizuho Financial Group. They are well-known for computers, software, disk arrays, and tools. The “Hi” in Hitachi means Sun and “Tachi” means rising. They make drills, saws, drivers, flashlights, etc.
Hitachi DS18DBFL2 comes with a lifetime warranty on the tool and 2-year warranty on the Li-ion battery. The tool is fitted with a slide-type battery. These are fade-free and lightweight batteries. There is a brushless motor with increased runtime and higher efficiency. These are professional grade tools that produce 620 inch-pound of torque and 1800 RPM. There is A 1/2-inch keyless chuck for ratcheting. It has 22 stages plus 1 clutch setting to deliver 22 torque settings. These settings are meant for precision and control during drilling. There is an optical trigger switch for speed actuation. The assembly is wear-resistant. There is a built-in LED that illuminates dimly lit and dark spaces and a battery indicator built into the tool exist a belt hook to keep the tool close at hand. The tool is well-balanced and has an ergonomic handle that prevents fatigue while using the tool.
Hitachi DS18DBFL2 is a driver-drill with a brushless motor. A brushless motor ensures less friction and heat. The microprocessor chip ensures the efficient current flow through the brushless tool. The ergonomic design is comfortable and well-balanced for extended use. It offers 620 inches per pound of turning force at 1800 RPM. There are a 22-stage and one clutch arrangement that offers 22 settings and drill mode. The tool is responsive and well balanced. You will enjoy precision at work through variable speed actuation.
Hitachi DS18DBFL2 is a professional-grade tool that delivers 620 inches-pounds of torque and 1800 RPM. It offers 22 stages plus 1 clutch setting that delivers 22 torque settings. The drilling mode offers control and precision. The optical trigger switch brings you a variable speed actuation that’s more responsive.
Hitachi DS18DBFL2 is supported by a 2-year warranty. The pack includes two Li-ion 1.5 Ah batteries, a charger, two Phillips bits, and a case.
- Multiple settings
- Trigger switch
- Keyless chuck
- Long battery life
- High torque
Hitachi Power Tools was rechristened Metabo HPT in 2018. They are an industry leader in making power tools for professionals. They make impact drivers, sanders, core drills, drill/drivers, polishers, grinders, etc.
Metabo DS18DBFL2QB offers a torque of 650 inch-pounds to execute a variety of applications. The tool has a keyless chuck that ensures a firm grip on the bit. It also allows an easy replacement of the chuck. The 22 + 2 setting of the clutch allows versatility to do various jobs. There is a gauge on the tool that indicates the battery status. The tool has a built-in LED light that illuminates the workspaces. The tool is only 3.5 pounds with the 1.5Ah battery. This reduces fatigue while doing a job. The Li-ion battery brings you fade-free power.
Metabo DS18DBFL2QB is an 18V brushless drill that takes power, torque, and performance to a new level. These features make this tool more powerful, lightweight and long-lasting. The tool has a keyless chuck for ratcheting. This makes it easy to replace bits and prevent their slippage. The tool has a bright LED light to illuminate narrow and dark places. As it is a compact tool you will be able to reach into recesses and light up the space to see the work area. The tool has an ergonomic grip and a center balanced design. The tool also a battery indicator that will inform you when to recharge the tool.
Metabo DS18DBFL2QB works on 18 volts. It is fitted with a 1.5 Ah Li-ion battery. It has a 1/2-inch keyless chuck. The torque is 620 in-lbs. and no-load speed is 0 – 400 and 0 – 1800 RPM.
Metabo DS18DBFL2QB is compatible with all Metabo 18V and 36V Li-ion batteries. The tool is covered by their lifetime warranty. The battery has a 2-year warranty and charger a one-year warranty.
- Li-ion battery
- LED light
- Keyless Chuck
- 22 plus 2 clutch settings
Craftsman is a subsidiary of Stanley Black and Decker. The brand has been making tools of all kinds since 1924. They make power tools, hand tools, lawn and gardening implements, etc.
CRAFTSMAN CMCD710C2 is a drill from the V20 series of cordless tool system. The tool runs on a brushless motor that offers 25% better runtime. This is due to no heat and friction generated while running the tool. This cordless drill cum driver has a 1/2-inch head. The tool used 350 watts of power to execute heavy applications. It has a two-speed gearbox with speeds – 0 – 600 RPM and 0 – 1900 RPM. These speeds are good for fastening and drilling.
There is a 1/2-inch ratchet chuck with improved bit retention. There are LED lights to provide illumination in a dark or dimly lit place like the underside of a sink or a loft. The V20 Lithium-ion batteries power the tools at 20 volts in an intelligent manner This means the power application is modulated according to the surface. The tool will exert less force on a softwood than on steel or other hard surfaces. There is a Lithium charger that charges the tool up in 60 minutes. The tool is compatible with the VersaTrack Wall organization system. The clips and other accessories are sold separately.
CRAFTSMAN CMCD710C2 has the power to do it all. be it building, repairing, maintaining or restoring. The tool will perform any task you entrust it. Be it the garage, yard or a job site – take the matters into your hands. With the powerful brushless motor, you will be able to finish the work 25% faster using only 350 watts of power. You have two speeds at your disposal to work on hard or soft surfaces. You can change the bits easily from the 1/2-inch keyless chuck. If you are working in dark and dimly lit areas then the LED light is a great help. The tool can be stored and carried anywhere using the storage bag.
CRAFTSMAN CMCD710C2 has plastic ratcheting chuck. The maximum power output is 350 UWO at 600 and 1900 RPM. It uses 20V MAX batteries of 1.5 Ah. The tool height is 7.98 inches, width is 2.76 inches and length is 7.6 inches. The weight is only 2.57 pounds.
CRAFTSMAN CMCD710C2 is a drill kit with one CMCD710 Drill-Driver, two V20 20V MAX Li-Ion batteries, one V20 20V MAX Li-Ion Charger and a Storage Bag.
- Lithium-ion batteries
- Dual speed of 600 & 1900 RPM
- Brushless motor
- Keyless chuck
10. Makita XFD131
Makita is a Japanese manufacturer of power tools. The company was founded in 1915 in Anjō, Japan. Blue-green is the signature color of Makita tools. These are affordable, entry-level tools by the company.
Makita XFD131 comes with a two-speed transmission – 0-500 and 0-1900 RPM. The tool is meant for drilling and fastening works. It has a brushless motor for 440 inch-pounds of torque. The motor is electronically controlled this causes the battery to last 50% longer per charge. There are no carbon brushes, therefore, no friction due to which it runs cooler. Energy is used efficiently and uses less energy. It changes the torque and RPM to match the demands of the application. The Extreme Protection Technology (XPT) offers dust and water resistance while working in conditions. The tool is compact and ergonomically designed to reduce fatigue. There is a rubberized grip to hold the tool properly and an LED to illuminate dimly lit areas. It is equipped with metal gears and housing for durability. It has computer controls to protect from overload, over-discharge and over-heating.
Makita XFD131 is meant for driving and drilling solutions. It has a superior power-to-weight ratio due to weight and torque. Due to the greater power, you enjoy improved productivity and durability. In the driver mode, the adjustable torque provides more control over a full range of applications. You can drive in small, delicate screws and large fasteners. It has 18V Li-ion 2.0 and 3.0 Ah batteries that charge quickly using the accompanying charger in 30 minutes. This reduces downtime and increases productivity. To extend the battery life and improve performance the tool carries Star Protection Computer Controls. This is a communication technology that allows the battery and equipped tool to exchange data for protection in real-time.
Makita XFD131 can drill 1/2-inch thick steel sheets and 1.5-inch-thick wood. the no-load variable speed is 0 – 500 and 0 – 1900 RPM. The maximum torque is 440 inch-pounds or 50 Nm. It has 18V Li-ion batteries and weighs 3.8 pounds with them. The overall length of the tool is 6.625 inches.
Makita XFD131 kit comprises of a18V LXT Li-Ion 3.0Ah battery, a Charger, a Brushless 1/2- inch Driver-Drill and a Tool Bag. The tool is supported by a 3-year warranty.
- Two-speed transmission
- Brushless motor
- Extreme protection technology
- Rubberized soft grip
- Uses Makita 18V LXT & Compact Li-Ion batteries
11. Ridgid R86116
This tool is made by Ridge Tool Company founded in 1923. This American company produces and distributes power tools under the brand – Ridgid. This is an 18-volt tool with a brushless motor. This cordless hammer drill has 100 settings, a micro-clutch and LED light.
Ridgid R86116 has a fully adjustable clutch with 100 possible positions. You can also tighten the clutch to produces a precise amount of torque. There is a brushless motor that runs without friction, faster and without heating up. There are LED lights that illuminate your work area. The lights can be illuminated independently in front of the tool. There is an auxiliary handle that can be inserted from either side. This grants you maximum control from the right and left side. This means left and right-handed people can use the tool. The handle is covered in rubber and offers a good grip and control. this keeps you free of fatigue for long jobs. The diecast gearbox is tough and durable.
Ridgid R86116 is powerful and will drill holes through masonry, wood, and metal. It can be used on soft and hardwoods – can deliver 27300 blows per minute and turn at 2100 RPM. to manage the power and precision a 100-position clutch is included in the kit. This is an electromagnetic micro clutch it has mechanical components that operate electrically but transmit the torque mechanically.The EM tooth clutch operates through electric actuation where the current flows through the coil turning it into an electromagnet produces flux lines.
Ridgid R86116 is 8.5 inches long, 8.3 inches high and 3.7 inches wide. The tool weighs 3.9 pounds. This battery-powered tool has a metal and plastic body.
Ridgid R86116 is supported by a lifetime warranty.
- 100 setting micro-clutch
- Brushless motor
- Auxiliary handle
- Ergonomic grip
- LED lights
Skil believes that the future of Do It Yourself has arrived. The users should forget the heady corded tools and opt for the next generation. Skil brings you patented battery technology and the PWRCore X range of tools. These tools are powerful, lightweight and compact.
SKIL PWRCore 12Ah Lithium set includes everything you need to start your DIY project. The set has a PWRCore 12 2.0 Ah Li-ion battery and a charger. You get a 2 times longer battery life and runtime due to the patented technology. Each cell is wrapped in a cooling material that brings you 25% longer runtime. The PWRJump charges the battery up to 25% in 5 minutes and 100% in only 45 minutes. The Power on the Go plug is a USB port with PWRAssist Mobile charging.
The brushless motor is digital, compact and lightweight. There is a hybrid chuck that allows you to change the bits quickly. This is a keyless clutch where you do not have to loosen or tighten chucks. You get precise speed control where you can take it up to 1700 RPM. The tool has a powerful LED that illuminates the workplace minimizing shadows. This helps you do a precise job.
SKIL PWRCore 12Ah Lithium tool is compact but power-packed. It is lightweight and heavy-duty for DIY projects. The SKIL PWRCore 12 Brushless 12-volt 1/2-inch chuck drill driver is the power tool for you. The battery innovation brings you a longer runtime and battery life. There is a green LED fuel gauge to indicate the charge level. These batteries will pair with any SKIL 12-volt tool. The tool has a brushless motor and a 1/2-inch single sleeve chuck. As it is keyless you can change the bit quickly and easily. The clutch has 17 plus 1 settings of the hybrid chuck. This makes it easy and quick to start on your projects. You get a precise speed control up to 1700 RPM.
SKIL PWRCore 12Ah Lithium has a no-load speed of 0 – 450 RPM and 0 – 1700 RPM. The tool produces a torque of 350 in-lbs and has a torque setting of 17 plus 1. The tool is 7 1/8 – inch long with a 1/2-inch hybrid chuck.
SKIL PWRCore 12Ah Lithium kit constitutes a drill driver, a 2.0 Ah PWRCore 12 battery, a PWRJUMP Charger and 2-inch bit PH2 and a belt clip. The tool comes with a limited warranty of 5 -years.
- Patented battery technology
- 17 + 1 chuck settings
- PWRCore 12 system
13. Ryobi P252
Ryobi Kabushiki-Kaisha – a Japanese manufacturer. They make tools and their components for telecommunications, automobiles and electronics industries. They make power tools, printing equipment, and builders’ hardware.
Ryobi P252 features an onboard magnetic tray that keeps your bits and fasteners in place. You will see a horseshoe symbol at the base of the drill. simply place the metallic bits on it. There is a belt clip that helps you attach the tool to the belt. This way you will have the tool by your side at all times. The adjustable clutch has 24 positions and a 2-speed gearbox.
This allows you to fine-tune the drill between precision and heavy-duty jobs. There is an on-board LED light at the base. This light activates on pulling the trigger. This way the drilling subject is out of the way yet well-lit without shadows. This allows you a clear view of the work area to do a precise job. The diecast gearbox is tough, drop and shock resistant.
Ryobi P252 has a brushless motor that ensures longer life, more power, longer runtime due to less friction. You can fit fasteners and screws in place quick and fast using a torque of 460 in-lbs. The drill can spin at 2 speeds – up to 500 RPM and 1800 RPM. You can choose the speed depending upon the material you are working with. The MagTray prevents you from losing or dropping the fasteners and bits. The LED lights up work areas such as dimly lit undersides of shelves, rafters, chairs, and sinks. There is a GripZone overmold on the tool that prevents slippage due to sweaty hands etc. The fade-free batteries will deliver maximum performance. Though this is a tool only offer – use the Dual chemistry charger with IntelliPort to extend the life of the batteries.
Ryobi P252 has an 18-volt battery and weighs 3.05 pounds. The tool is 8.3 inches long, 8.1 inches tall and 4.7 inches wide. The drill offers a torque of 460 in-lbs. and has a 24-position clutch. There is a two-speed gearbox with 0 – 500 RPM on position 1 and 0 – 1800 RPM on position 2. The dual function 1/2-inch chuck has jaws to secure the bits. There is a 1/4-inch collet to attach the driving bits quickly.
- Magnetic tray
- 24-position clutch
- 2-speed gearbox
- LED light
- Rubber covered grip
This is a 20-volt brushless compact drill with a Li-ion battery and charger. The tool has a 1/2-inch chuck and two variable speeds.
Cacoop Cordless Drill Driver Set comes with a cordless drill driver that runs on a brushless motor. The frictionless motor offers 50% more runtime and longer life to the tool. The motor converts the power into powerful torque. The tool offers 370-unit watts UMO and maximum torque of 398 in.lbs. These specifications make the tool perfect for heavy applications. There is no stalling or heating up of the tool. The tool has a chip with an advanced intelligence board and electronics. The system modifies its response to the surface it is working on and there is built-in overload protection. This brushless motor is compatible with the battery system. It brings you excellent runtime and power.
Cacoop Cordless Drill Driver Set has a drill – driver. It has a quick loading and unloading chuck. It has a two-speed gear of 0 – 400 and 0 – 1600 RPM. There is a 5-second delay LED working light and battery charge indicator. The tool facilitates easy drilling and screwing. There is 398 inch-pound of torque that improves productivity. The tool also charges up in 60 minutes. It is compact and lightweight – this makes it easy to carry to the job site. The ergonomic design fits the hands well. This enhances your user experience and reduces fatigue.
Cacoop Cordless Drill Driver weighs 5.27 pounds. The dimensions are 13.8 inches by 10.5 inches by 4 inches. The unit comes with 1 Li-ion battery. The tool work at 20 volts with battery amperage of 2 Ah and a battery life of 2 hours. The tool has a 1/2-inch chuck and produces a torque of 398 in-pb and speed of 0 – 400 and 0 – 1600 RPM.
Cacoop Cordless Drill Driver Set has a 20-volt drill cum driver. It has six HSS wood drill bits and 6 hex shank screw driving bits. There is a magnetic bit holder and drill bit organizing case.
- Stable power
- Brushless motor
- No stalling
- Quick loading chuck
- 2-Speed gear
15. TECCPO TDHD02P
TECCPO stands for Technology Creates Power. This is a new brand for power tools.
TECCPO TDHD02P delivers excellent performance via the four-pole copper motor. It delivers 530 in-lbs of torque. The tool has a 24 plus 1 position clutch that is 30% more precise than other drills. It has a two-speed transmission – position 1 offers 0 – 450 RPM and position 2 offers 0 – 1700 RPM. You will never be without power as there are two pieces of 20 Volt, 2000 mAh Li-ion batteries. You can use them alternatively to power the tool.
There is a 4A ultrafast charger that powers your tool in 30 minutes which is 50% faster than others. it has all-metal gears and a 1/2-inch keyless ratcheting chuck. These offer the best accessory compatibility and durability. The F/R switch allows you access to variable speed for fastening and drilling. The over-mold design reduces vibration and increases comfort. The shaft is flexible and allows you access to tight and narrow workspaces.
TECCPO TDHD02P can drive screws, make holes through plastic, wood, and metal. The clutch will show numbers from 1 to 24. To adjust the clutch, turn the dial, this aligns the arrow – drive a screw, pick a lower setting for drill a hole, pick a higher setting.
TECCPO TDHD02P runs on 20V Max 2.0 Ah Li-ion batteries. The no-load speed is 0 – 450 RPM and 0 – 1700 RPM with maximum torque of 60Nm.
TECCPO TDHD02P has a drill-driver, two 20V batteries, a charger, a flexible shaft, and a contractor bag. There are a belt clip and a 29-piece accessory set – 15 screwdriver bits of 25mm, 7 drills, and 5 screwdriver bits. There are a nut bit adapter and extension road beside a user manual and two-year warranty.
- Rubber over-mold
- Keyless chuck
- 2000 mAh battery
- Trigger activated LED light