Home repairs and renovations nowadays are made easy and convenient with the most advanced, innovative tools in the market. From master carpenters and woodworkers to DIYers, they prefer tools that feature safe and advanced technology. One of the most useful and sought-after hand tools when it comes to woodworks are the best finish nailers.
Best finish nailers makes the job faster, easier and safer. Back when we only have the trusted and humble traditional hammer, woodworking was a tedious task, especially when we have to perform delicate framing, either we splinter and break the wood or hit our fingers. Best Finish nailers are like a heaven-sent gift- they make repairs and home renovations a breeze.
What are best Finish Nailers
Finish nailers are basically nailing guns- once you start to learn how to use one, you would never want to use a hammer again. Finish nailers are like brad nailers, but they usually use larger nails. They also use small heads that can be driven and fixed into the material and are not noticeable. Aside from making you job faster, compared with traditional hammers, these nailers can be used with just one hand so the other hand can hold and keep the molding or wood trim in place. Finish nailers drive nails flawlessly and effortlessly, without any hassle.
Benefits and Uses of Best Finish Nailers
Best Finish nailers are great for using in small trim boards and molding on projects involving woodworks. As mentioned above, finish nailers also use small nails that can be driven through trim boards into softwood, hardwoods and plywood.These nailers are also great for use with MDF (Medium-density fiberboard), these specialty wood products can be nailed smoothly without leaving any trace or footprint. The barely noticeable tiny hole it leaves can be easily worked out with wood fillers and painted over.
Best Finish nailers have garnered the trust and popularity among woodworkers as these tools are highly unlikely to split fine trim, such as wood screws. Additionally, predrilling isn’t needed so splitting or breaking the molding can be avoided. Finish nailers have so many uses and are recommended for shelving, crown molding, cabinetry, casing, baseboards, paneling, anddoor and window trims.
Straight or Angled
There two kinds of best finish nailers- the straight nailers and the angled nailers. What are differences? Angled and Straight pertains to the angle of the device’s nail magazine. Angled finish nailers, the more expensive of the two are better in terms of accuracy, and access into tight areas and corners. These nailersfeature smaller front ends and thus has better access for trimming. The angled finish nailers design also makes nailing placement easier and more precise, they allow you to drive the nails deeper and more securely fixed.
However, even the best of the best has their own cons too. Angled finish nailers have fatter and thicker nails, these nails are expensive and can be difficult to use if you’re onto doing intricate finishing jobs. Bigger nails may break or split delicate trims and leave a much bigger hole to fill and paint over.
On the other hand, Straight finish nailers, are less expensive, usually bulkier and heavier, and shoot thinner nails. Unlike their angled siblings, straight finish nailers, though accurate, cannot access tight spaces as easily. One of the good things though, about these finish nailers is that their much thinner nails leave smaller footprints, therefore smaller holes to fill. Another advantage in using straight finish nailers is that they are more ideal for jobs requiring a sizeable quantity of fasteners(we have also written a comprehesive guide about the Best Brad Nailers)
What to Look For
Aside from deciding which kind of best finish nailer suits your needs better, there are other factors to consider before heading out to buy or place your order online.
Size and Weight
When doing finishing jobs, it usually takes the whole day and some of the time, it takes days. The weight and size of the finish nailer you choose plays an important role- a heavy tool means putting stress on your hands and wrists as you would be using it for hours. Smaller-sized finish nailersallow you to access tight places and at varied angles. Additionally, the batteries add weight to the tool, large capacity batteries mean they are heavier and larger.
Durability
A heavy-duty and long-lasting finish nailerwill let you perform your job without any hassle, never compromise the durability for the price, in the long run, you may spend more when your tool breaks or stops working in the middle of a job. The material used in constructing the tool is abig factor that contributes to how long it would last you- some finish nailers are made from Magnesium, Aluminum and a whole lot more. These two are both lightweight and lends a convenient feature to the tool.
Operating Modes
This feature is not just to offer you convenience but safety as well. Getting yourself acquainted to the different firing modes can avoid accidental firing.
BumpFiring Mode is ideal for when you need to fire nails in quick succession. This type of mode speeds up work- it works by depressing the trigger and “bumping” the nose of the gun onto the work.Single-sequential Firing Mode- when activated keeps you from bump-firing nails. To do this, youjustoperate the safety tip and trigger in series to fire the first nail. However,it also allows you tofire additional nails by keeping the safety tip depressed against the surface,release andactivate the trigger for each nail you drive.
Single-actuation Firing Mode- is a bit similar to single-sequential firing mode, however, to use this mode, you operate the safety tip and trigger any order you want, including firing the first nail in bump-firing mode.
(we have written a guide for choosing the best dual fuel generators)
The Single Shot Mode option is for when you want to drive one nail at a time- to do this, you push the nose onto the spot where you want to drive a nail to allow the safety mechanism to depress, then pull the trigger to fire the gun.
Full-sequential Firing Mode- this mode does not allow you to bump-fire, it requires constant activation of the safety tip and trigger to fire each nail. To use this mode, you activate the safety tip and trigger to fire a nail, you then release the tip and trigger and activate it again in the right sequence.
Nail Depth
This feature is important as you need a variety of depth consistent to the type of wood you are working on, it lets you regulate how deep the nail drives into the surface. Some finish nailers are equipped with adjustable depth control, while others would require additional tools.
Sufficient Lighting
Some Finish nailers feature LED lights- this is especially useful as you would sometimes find yourself working on low-light areas and dark spaces, this feature can cast a light directly to the area you are working on without the need for additional lighting.
Nail Jamming
Nail jams can be quite exasperating especially if you need to finish a job fast, time-consuming extrication of the jammed nails can be avoided by choosing a finish nailer model that features a swing-open nose piece that lets you remove the jam quickly and easily.
Warranty
Warranties are as important as the durability and features of the finish nailer you choose. Warranty coverage varies, it can be as short as a few months, to a year. Some manufacturers offer a lifetime warranty, and even a money-back guarantee. One important thing to keep in mind, is that the longest warranty means the manufacturer has faith in the durability and efficiency of the product they deliver.
Price
Prices vary for finish nailers, the market is teeming with various manufacturers, brands, models and features to choose from. If you are using the tool regularly, it would be ideal for you to choose something that is tough, from a brand that is trusted by many, and usually that means shelling out a few more than the allotted budget.
Convenient Features to Look For
These are some of the features that you would find most useful and convenient- they can make your job easier, finish your work faster, offer safety measures and prolong the life of your tool. (we have written extensively for the best generators brands)
A nail size adjustment feature lets you easily switchnail sizes for different tasks. A Tool free depth-of-drive lets you conveniently adjust even with gloves on. The Nail lockout feature prevents blank driving. Swiveling air connectors on pneumatic nailerslessen air hose tangles. Some finish nailers come with protective guards to prevent damagingyour tool and protect you from flying debris.
An Integrated air duster is useful in clearing away dust and debris from the work surface.Some finish nailers are equipped with soft rubber grips for comfortable handling. A no-mar tipped finish feature is great to use in soft wood, rear loading magazines make it easier to reload, batteries that hold longer hours allows you additional work time, a magazine that can hold more nails saves you time from re-loading time and again. Carrying cases can be included in the set- these cases protect the nailer from damage during transport.
1. Milwaukee Electric Tool 2741-21CT Milwaukee M18 Fuel 16 Gauge
For precision and maximum power in all your finishing and woodworking needs, the Milwaukee Electric Tool 2741-21CT Milwaukee M18 Fuel 16 Gaugeis the answer, this heavy-duty tooloffers longer-lasting dependability and longer life. Equipped with advanced features, the Milwaukee 2741-21CT provides speed and efficiency- has a oneof a kind POWERSTATE™ Brushless Motor, REDLINK PLUS™ intelligence, and more, the Milwaukee Electric Tool 2741-21CT can be trusted to let youdomore workin very little time.
Design and Construction/Materials and Durability
The Milwaukee Electric Tool 2741-21CT Milwaukee M18 Fuel 16 Gauge has a main body constructed from top of the line, tough materials, while its housing is crafted from high-quality and durable plastic that makes this 18-volt nailer ultra-lightweight.
Features
The Milwaukee Electric Tool 2741-21CT Milwaukee M18 Fuel 16 Gauge Straight Finish Nailer offers ease of use, and practically very little maintenance, this 18-volt nailerworks onits innovativeREDLITHIUM™ Battery that has maximum strength and provides you longerrun-time- no frequent charging and no mess and costly gas cartridges. This nailer uses its unique and compact POWERSTATE™ Brushless Motor, as well as its REDLINK PLUS™ intelligence, the most innovative and first of its kind electronic system on the market- a feature that keeps the unit from overloading and overheating. The Milwaukee Electric Tool 2741-21CT can effortlessly drive 2 ½ inch nails even into the hardest of woods, such as solid oak, lendsyou hassle-free work- nocompressors and hoses. The set also includes a Contractor Bag and a Belt Clip
Warranty
The Milwaukee Electric Tool 2741-21CT Milwaukee M18 Fuel 16 Gauge Straight Finish Nailer offers a 5 Year Limited Warranty
Pros
- Lightweight and durable material
- Advanced features
- Nice warranty
- 100% battery powered
Cons
- Occasional nail jamming
2. DEWALT D51257K Finish Nailer
DeWalt, one of the leading manufacturers of advanced and durable tools has always been among the most respected and trusted companies globally, it started in 1922 when Raymond DeWalt refined and perfected the very first woodworkingmachine, and since then DeWalt, with its advanced technology, has manufacturedinnovative and unrivaled woodworking tools in the market. The DEWALT D51257K 1-Inch to 2-1/2-Inch 16 Gauge Finish Nailer has the durability and versatility that lends you ease and accuracy in all your woodworking projects. Equipped with the DeWalttechnology, this finish nailer can be used with or without oil and has an operating pressure of 70-120 PSI. It has a 360-degreerotating exhaust cap, nail depth adjustment, and a lot more features.
Design and Construction/Materials and Durability
The DEWALT D51257K 1-Inch to 2-1/2-Inch 16 Gauge Finish Nailer is crafted and housed in high-quality and ultra-durable materials DeWalt has always been famous for.
Features
The DEWALT D51257K 1-Inch to 2-1/2-Inch 16 Gauge Finish Nailer uses DeWalt’s unique technology, Sealed Lube Dual Technology- the tool can be operated with or without oil lubricants. It is equipped with a low profile no-mar pad that lends precise and effortless nailing. It features tool-free: belt hook that adjusts easilyand ideal for both right or left-hand users, nail depth adjustment and a 360-degree rotating exhaust cap. This finish nailer can hold up to 100 nails- allowing to work longer without having to reload frequently and uses 1-inch to 2-1/2-inch (25.4 milimeter-65 millimeter) 16 gauge straight collated nails.
The DEWALT D51257K has an operating pressure of 70-120 PSI “Pounds per Square Inch (pressure)”and has a rear-loading magazine system that allows for effortlessand quick reloading. Itis equipped with an internal piston catch that offers constant accuracy and excellent drive on every shot and tool-free jam clearing feature that allows for quick and easy extraction in case of nail jamming. It has an over molded grip that gives the user a comfortable and no-slip grip. It includes a carrying case, 1000 2-inch finish nails, a pre-installed sequential action trigger and a trigger lock-off.
Warranty
The DeWalt D51257K is covered by DeWalt’s 3-year limited warranty, 1-year free service and 90-day money back guarantee.
Pros
- Useful and convenient features
- Lightweight
- Durable material
- Nice warranty
- Uses 1-inch to 2-1/2-inch (25.4 milimeter-65 milimeter) 16 gauge straight collated nails
- Sealed lube dual tech: motor works as an oil free and oil lube unit.
- Includes carrying case and sample finish nails
Cons
- Some users find the plastic trigger a bit flimsy
3. Hitachi NT65MA4 Angled Finish Nailer with Air Duster
Hitachi, Ltd. (Kabushiki Kaisha Hitachi Seisakusho) is a world-famous corporation with headquarters in6-6, Marunouchi 1-chome, Chiyodaku, Tokyo, 100-8280 Japan, this well-known manufacturer of top of the line products was founded in 1910 and established in February 1, 1920. For more than a decade now, Hitachi has been innovating products from Information and Telecommunication Systems, Industrial Systems etc. to Digital Media and Consumer Products. Hitachi has been known globally for its world-class innovation in providing tested, durable and high-quality products.
One line of product Hitachi has been distinguished for are their ultra-durable and feature-packed nailers, woodworkers and carpenters alike go for these dependable tools. The Hitachi NT65MA4 1-1/4 Inch to 2-1/2 Inch 15-Gauge Angled Finish Nailer with Air Duster has been provenreliableand effective for woodworking jobs such as installing staircases, window and door casings, exterior trim, crown and base moldings, cabinets,chair rails, and a lot more.This finish nailer can easily access tight spaces and a magazine that can hold 100 nails so you don’t have to reload as much.
Design and Construction/Materials and Durability
The Hitachi NT65MA4 1-1/4 Inch to 2-1/2 Inch 15-Gauge Angled Finish Nailer with Air Duster is constructed from high-quality lightweight aluminum housing.
Features
This finish nailer features an integrated air duster that’s especially useful in getting rid of debris and dust from the surface. It has an easy to clear nose that allows you to extract nails in cases of nail jamming. Its selective actuation switch gives you the option to choose from sequential or contact nailing with just a flip of the switch. It has an adjustable depth of drive dial appropriate for the kind of wood you are working on, it also provides more control and gives an impeccably finished result. It also features a 360-degree fully adjustable exhaust portal that keeps air exhaust away from you and the project you are working on.
This finish nailer is so lightweight at 4.2 pounds- maximizes flexibility and reduces the probability of fatigue. Its 34-degree magazine angle lets you easily reach into odd corners and tight spaces. It also comes with a no-mar tip that is excellent to use for soft woods. A convenient carrying case is also included to make sure your tool is protected during transport. To protect your eyes from dust and debris while working, Hitachi also included safety glasses in the set.
Warranty
The Hitachi NT65MA4 1-1/4 Inch to 2-1/2 Inch 15-Gauge Angled Finish Nailer with Air Duster is covered by Hitachi’s 5-year warranty.Additionally, the pistons, drivers and O-rings relatedwith this tool are covered by a 90-day warranty from the original purchase date.
Pros
- Lightweight and durable
- Attractive body design
- Functional and convenient features
- 5-year warranty
- Integrated air duster can be used to clear away dust and debris from the work surface in preparation for nailing or gluing
- Tool-less depth of drive dial adjusts for flush fastening into varying materials for improved control and a professional finish
- Factory installed air fitting is angled upwards to keep the compressor hose conveniently out of the way of the user and work piece
Cons
- Some users complain of occasional nail jamming
4. BOSTITCH BCN662D1 20V Max 16 Ga Straight Finish Nailer Kit
Bostitch, one of the prominent and distinguished names when it comes to providing dependable tools, for more than a decade now, this company has manufactured durable and innovative fastening tools- the BOSTITCH BCN662D1 20V Max 16 Ga Straight Finish Nailer Kit is 100% battery powered and is brimming with convenient features to make all your finishing jobs quick and easy and with a flawlessfinish. It has a tool free jam release lets you take care of nail jamming easily, LED lights, brushless motor and a whole lot more.
Design and Construction/Materials and Durability
The BOSTITCH BCN662D1 20V Max 16 Ga Straight Finish Nailer Kit is constructed from durable and high-quality materials, from body to housing, ensuring long life.
Features
The BOSTITCH BCN662D1 20V Max 16 Ga Straight Finish Nailer Kit has tool-free selector switch that allows to easily switch from sequential to contact-actuation modes,brushless motor maximumruntime, and engine design that drives 16ga straight finish nails from 1-1/4″ to 2-1/2″ length- perfect for all applications such as baseboards, crown molding, door and window casings, chair rail, and many more, its narrow nose design lends accuracy in nail placement. It is equipped with multi-functional LED lights that allows you to work in dim places and illuminates the work surface for better visibility without the need for additional lights. It has tool-free jam release for quick extraction of nails in case of nail jams. It is 100 percent battery powered and saves up time setting the device up and equipped with tool-free stall release lever to for easier resetting of the driver blade if a stall occurs. The set includes 1 Bcb203 20V max* high capacity li-ion battery (2.0Ah), 1 Bcb115 charger, an adjustable belt hook, and kit bag.
Warranty
The BOSTITCH BCN662D1 20V Max 16 Ga Straight Finish Nailer Kit comes with a 3-year limited warranty.
Pros
- 100% battery powered
- Heavy-duty material and design
- Made in USA
- Useful and convenient features
- Brushless motor and engine design drives 16ga straight finish nails from 1-1/4″ to 2-1/2″ length
- Narrow nose designed for clear line of sight and accuracy of nail placement
- Multi-functional LED lights help to provide both workspace illumination and tool diagnostics
- Tool-free jam release to quickly and easily clear nail jams
Cons
- A bit heavy
5. DEWALT DC628K XRP Angled Finish Nailer
The DEWALT DC628K Cordless Angled Finish Nailerhas the accuracy and convenience you need for all your finishing and woodworking projects, thespeed of pneumatic nailer combined with the precision of a hand nail gun. This feature-packed finish nailer is the perfect tool to use in all your wood applications.
Design and Construction/Materials and Durability
The DEWALT DC628K Cordless is constructed from tough and durable materials to ensure the unit’s long life.
Features
The DEWALT DC628K Cordless Angled Finish Nailerithas a dust and debris-proof 34-degree angled, rear-load magazine that can hold up to 110 nails, a narrow nose that can easily access oddand closed spaces, angled magazine letsyou nail easily into,and it has two operating modes- Sequential and high-speed Bump firing. This lightweight tool drives 1-1/4 to 2-½-inchnails, no compressor or air hose needed, and operates thru a rechargeable 18-volt battery.Its other features are precise depth-controlmechanism, swing-open nosepiece for clearing jams, Integrated LED lights, safety contact lock-off that disables the trigger, a no-mar tip, and a reversible belt hook. The set comes with an 18-volt XRP NiCad battery, one-hour charger, reversible belt hook, safety glasses, and plastic storage case.
Warranty
This unitis back by a DEWALT 90-day money-back guarantee, and three-year limited warranty, and two-year service contract on the XRP battery.
Pros
- Awesome features
- Durable
- Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
- Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
- Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
Cons
- A bit heavy
6. DEWALT DC618K XRP 18-Volt
Dewalt, the leading manufacturer of advanced and top of the line woodworking tools, has always been the trusted brand in the market. Since 1922, when Raymond DeWalt manufactured the first ever woodworking machine, DeWalt has been producing exceptional and superlative-quality tools globally. The DeWalt DC618K Cordless Angled Finish Nailerprovides accuracy in all your woodworking projects. This tough and durable tool has the capacity to finish your job quickly and effortlessly. The perfect finish nailer to use on all kinds of wood, the DeWalt DC618K does not require a compressor and eliminates the need to drag an air hose around, itis equipped with a rear-load magazine that can hold 110 nails, precise depth-control mechanism, and a whole lot more features to make your job easier.
Design and Construction/Materials and Durability
The DeWalt DC618K Cordless Angled Finish Nailer is crafted from only the highest quality materials and is proven durable and long-lasting.
Features
The DeWalt DC618K Cordless Angled Finish Nailer provides accuracy and efficiency in all your woodworking projects, this heavy-duty 20-degree angled finish nailercan drive 16-gauge nails from 1-1/4 to 2-1/2 inches in length as fast as five nails per second. Powered by DEWALT’s 18-volt XRP batteriesthis finish nailer lends you more hours of work without having to charge the device frequently.This tool allows you to choose between sequential operating mode accurate placement of each nail or a bump operating mode that allows quickerdriving of nails. It has a6-position dial that allows the user toshift between applications easily. The integrated LED lights lets you work easily in dark or low-lit areas without needing additional light.
This ultra-lightweight tool allows offers you accurateand constant nail penetration into both soft and hard wood. Its 20-degree angled magazine can hold up to 120 nails,itsrear-load magazine makes it easier for you to reload, and a swing-open nosepiece for easier extraction of nails in case of nail jamming. This tool is equipped with a safety contact lock-off that disables the trigger, a no-mar tip, a reversible belt hook, 18-volt XRP NiCad battery, one-hour charger, safety glasses, and plastic storage case.
Warranty
This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It’s also covered by DEWALT’s two-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal usefor free.
Pros
- Durable construction
- A variety of convenient features
- Long battery life
- Sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
- Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard joints
Cons
- Some users find it a bit heavy
7. BOSTITCH N62FNK-2 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish
When it comes to pioneering top of the line fastening tools and fasteners, Bostitch is thename that comes to mind. Synonymous to innovation, Bostitch, originally known as Boston Wire Stitcher® Company was founded by Thomas Briggs and has been creating dependable and long-lasting tools since 1896, from the wire stitcher, the first coil nailer to the Smart Point®. The N62FNK-2 FinishNailer is the ideal tool to use for detail work and finishing touches on all your home projects- from adding trim around your windows and doors, crown moldings and all furniture projects. This finish nailer features adjustable nail-depth settings, four angled profile tips, oil-free operation and more.
Design and Construction/Materials and Durability
The BOSTITCH N62FNK-2 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish has a tough but lightweight magnesium housing, and at 11.63-by-3.13-inches, 3.8-pounds is extremely light and perfect for long hours of use without putting strain to your wrists and hands.
Features
The BOSTITCH N62FNK-2 15-Gauge 1 1/4-Inch to 2-1/2-Inch Angled Finish is the world’s first 15-Gauge tool thatfeatures extremely-quiet rear exhaust to direct air away from you and/or the project you’re working on. This finish nailer is the ultimate tool to use for a perfect finish on all your projects such as cabinet installation, crown moldings, trimmings and a whole lot more. With its tool-free magazine that can hold 130 nails- more work with a single reload, saves you time, additionally, the magazine can be removed easily to clear nail jams and for when you need to clean it.
This tool also features an Integrated air blower that will allow you clear dust and debris from the work surfaces. Its selectable trigger with safety lock-out gives you the option to choose between single or multiple fastener drive mode. It has a 16 on-center-Gauge that flips out to measure 16 in. (end to nose)idealfor running baseboard and makesit easier for you to locate wall studs when working on wall trims. It is equipped with an integrated LED work light to make it easier for you to work in dark spaces, a swivel air fitting that lessens hose interference on tool for better maneuverability. This tool has an oil-free operation – for hassle-free maintenance and includes a tool-free adjustable belt hook with detents,4 profile tips and samples fasteners, and a carryingcase.
Warranty
The Bostitch N62FNK-2 Angled Finish Nailer is backed by a seven-year limited warranty.
Pros
- Lightweight and durable
- Made in USA
- 1 1/4-inch to 2-1/2-inch 15-gauge oil-free angled finish nailer
- Tool-free removable and angled magazine, adjustable depth control, bypass nail pusher
- Durable, lightweight magnesium housing
- Awesome features
- Warranty
Cons
- Occasional nail jamming
8. Senco 4G0001N FinishPro 42XP 15-Gauge Finish Nailer
For more than 5 decades now, Senco products Inc., has delivered dependable and durable tools globally, this distinguished company has been famous for its pneumatic and powered fastening systems, alongwith the fasteners. Senco, based in Cincinnati, Ohio has always been trusted for it excellent craftmanship and technique in designing their tools- innovative and advanced tools used in homeconstruction and renovation/remodeling, furniture assembly, and a whole lot more. The Senco FinishPro 42XP 1-1/4-Inch to 2-1/2-Inch 15-Gauge Finish Nailer is one of Senco’s pride-it has a Thumb wheel adjustable depth of drive, Senco’s unique Neverlube® technology, a 360-degree adjustable exhaust, and more awesome features.
Design and Construction/Materials and Durability
The Senco FinishPro 42XP 1-1/4-Inch to 2-1/2-Inch 15-Gauge Finish Nailer has a durable and lightweight Magnesium housing -perfect to use for longer hours.
Features
The Senco FinishPro15-Gauge Finish Nailer features anupgraded long-life driver, more durable main body,and safe and comfortable to use trigger that lessens fatigue.It can drive both bright and galvanized 15-gauge finish nails effortlessly from 1-1/4 to 2-1/2 inches even into the hardest woods. It features a Thumb wheel adjustable depth-of-drivethat providesaccurate drives and a 104-nail capacity that lets you work without frequent reloading. Work with ease and comfort with its ergonomic no-slip grip, and EZ-Clear latch that allows you to extract nails in case of nail jamming. The Senco Finish Pro uses its one of a kind NeverLube technology that lets you use the tool without having to oil or lubricate it, avoiding mess and oil stains on your work surfaces. It features Two No-Mar pads with onboard storageto keep work materials protected, a 360-degree adjustable exhaust. The set includes a construction ruler and advanced belt hook.
Warranty
The Senco FinishPro 42XP 1-1/4-Inch to 2-1/2-Inch 15-Gauge Finish Nailer is backed by a five-year warranty.
Pros
- Lightweight housing
- Neverlube® technology – no lubrication required
- EZ-Clear latch- to clear jams fast
- 360-degree adjustable exhaust
- Durable main body
- Convenient features
Cons
- Users complain of the rubber tip
9. Makita AF601 16 Gauge, 2-1/2″ Straight Finish Nailer
Makita, a well-known corporation renowned for its innovative and world-class tools was founded in 1915 as an electric motor sales and repair company. For than a decade today, Makita has been a global brand and has been producing the most dependable and unsurpassed tools in the market. The Makita 16 Gauge Straight Finish Nailer (model AF601) is one of Makita’s popular tools, trusted by woodworkers and professional carpenters all over the world.
Design and Construction/Materials and Durability
The Makita 16 Gauge Straight Finish Nailer (model AF601) has a Magnesium body that is both durable and lightweight.
Features
The Makita 16 Gauge Straight Finish Nailer (model AF601) has tool-lessdepth adjustment,adependablemotor design that offers maximum performance, a nail lock-out mechanism to avoid dry-firing, a built-in air duster that clears dust and debris away from you and the work surfaces, and a 2-mode selector switch. This lightweight tool has a multi-directional exhaust port,tool-less easy to clear nose for quick andeffortless nail extraction, housing bumpers to protect your tool and work surface, a rear-loading magazine uses standard 16 ga. straight finish nails (sized 1″ to 2-1/2″), areload alert thatlets the user knowwhen to reload nails.The set includes safety glasses, 2 No-Mar Tips, Air Fitting, and a tool case.
Warranty
The Makita 16 Gauge Straight Finish Nailer is backed by a3 Year Warranty
Pros
- Loaded with useful features
- Tough and lightweight
- Efficient motor design offers leading power performance
- Nail lock-out mechanism protects tool and work surface from dry-fires
- “Tool-less” depth adjustment for more precise flush and Countersink nailing
- Nice warranty
Cons
- Would be better with integrated LED
10. Paslode T250A 16-Gauge Pneumatic Angled Finish Nailer
The Paslode T250A Angled 16 Gauge Trim Finish NailerNo.500910 is the perfect tool for Door and window casings, and shoe molding, Cabinetry, Chair Rails, Crown molding, Door jambs and stops, Paneling, Baseboard, Stair assemblies and Pick-up andService work, this heavy-duty finish nailer has loads of features that lends convenience and ease in accomplishing your tasks- it is super lightweight and lets you finish your work without straining your wrists, its angled magazine lets you reach odd spaces easily, allows the professional to reach tighter spots than with straight finish tools and easier access to odd corners.The Paslode T250A Angled 16 Gauge Trim Finish Nailer is the ideal choice and perfect addition to your finishing woodworking tools.
Design and Construction/Materials and Durability
The Paslode T250A Angled 16 Gauge Trim Finish Nailer is constructed from first-class durable materials and is lightweight at 3.8-pounds.
Features
The Paslode T250A Pneumatic Angled 16 Gauge Trim Finish Nailerfeatures a tool-free adjustable depth of drive-lends the user accurate control of nail depth in all kinds of woods, its angled magazine lets you accesseven the tightest and oddest of spaces and corners. This lightweightfinish nailer’s16-gauge system leaves smaller nail holes and eliminates wood splitting,its directional exhaust cap lets you shift the direction of exhaustand dust. It also features a nail lockout (at 10 nails)to preventblank firing, an ergonomic soft and textured handle for comfort and no-slip grip, and its rear load magazine with two-step follower lets you load nails easily. The Paslode T250A includes a sturdy plastic carrying case, an extra no-mar tip, a reversible/removable belt hook,and an owner’s manual.
Warranty
The Paslode T250A Pneumatic Angled 16 Gauge Trim Finish Nailer is backed by 1-year manufacturer’s warranty.
Pros
- Lightweight and durable build
- An array of useful features
- Use for baseboard and shoe molding, cabinetry, chair rails, crown molding, door and window casings, door jambs and stops, paneling, stair assemblies and Pick-up, and and service work
- Angled magazine allows the professional to reach tighter spots than with straight finish tools and easier access to corners
- Versatile
Cons
- Occasional nail jamming
11. BOSTITCH BTFP72156 Smart Point 15GA FN Style Angle Finish Nailer
For more than a decade now, Bostitch, also known as Boston Wire Stitcher® Company was has been creating and providing the world durable and reliable tools.Since 1896, this world-famous company has producedtop-of the-line tools and created a legacy in fastening. The BOSTITCH BTFP72156 Smart Point 15GA FN Style Angle Finish Nailer is one of Bostitch’s top-selling finish nailers- it uses Smart Point technology that allows easy nail placement,an integrated air blower to clear dust away, has a tool-free jam release mechanism, and whole lot of other features that lends ease and comfort to the user. This ultra-lightweightnailer is so durable it will last you for many years.
Design and Construction/Materials and Durability
The BOSTITCH BTFP72156 Smart Point 15GA FN Style Angle Finish Nailer is constructed from durable materials and is lightweight- longer hours of use without putting stress on your hands and wrists.
Features
The BOSTITCH BTFP72156 Smart Point 15GA FN Style Angle Finish Nailer canbe used without oil/lubricant- this means longer tool life and no oil stains on your work surfaces. It features Dial-A-Depth control for accurate countersinking of nails, Tool-free jam release mechanism that allows you to extract nails easily in cases of nail jamming, and an integrated air blower that easily clears away dust and debris. Thisfinish nailer is also equipped with a selectable trigger system that gives the user the option to choose between sequential or contact operation, it uses 15GA “FN” style angle finish nails from 1-1/4 inch to 2-1/2 inches in length and Smart Point technology-the tool’s smaller nose makes it easier for you to drive the nails accurately, eliminating the need to compress the contact tip, thus, avoiding work surface damage.
Itfeatures a16-inch on-center gauge that flips out to measure exactly 16 inches from end to nose,ideal for when you are installing wall trim. This angled finish nailer is convenient to use even in odd or tight spaces, it has standard no-mar tips, and includes an adjustable belt hook,a pencil sharpener,sample fasteners and an owner’s manual.
Warranty
The BOSTITCH BTFP72156 Smart Point 15GA FN Style Angle Finish Nailer comes with a 7-year limited warranty.
Pros
- Extremely useful features
- Lightweight and durable build
- 7-year warranty
- KIT INCLUDES: Nailer, 1/4″ Air Fitting, Sample Fasteners, Carrying Case and Extra No-Mar Tips.
- TOOL-FREE JAM RELEASE MECHANISM: For easy nail removal.
Cons
- Nail jamming occurs at times
12. Paslode 902400 Cordless Finish Nailer
For precision and accuracy in all your woodworking projects, trust Paslode 902400 Cordless 16g Angled Lithium Ion Finish Nailer to do the job. This lightweight and heavy-duty cordless nailer offers you superlative maneuverability and ease, this feature-packed finish nailer is the ideal tool to use if you need your work impeccably finished in time. It charges fast and has a magazine that can hold sufficient fasteners- gives you more work time and less time reloading.
Design and Construction/Materials and Durability
The Paslode 902400 Cordless 16g Angled Lithium Ion Finish Nailer is crafted from only the finest durable materials to ensure durability and long life.
Features
ThePaslode 902400 Cordless 16g Angled Lithium Ion Finish Nailer is ultra-lightweight, at only 4.5 pounds, this nailer is guaranteed to let you finish your job without putting any strain to your hands and wrists. It uses its new In-Can Fuel System for easierinstallation and use,additionally, it can be used with Paslode’ s older 16g Angled Finish Nailers. This Angled Finish nailerhas a fast chargingLithium Ion battery that provides 50 percent longer run time (up to 200 nails per 2-minute charge/ 6,000 nails full charged).
ThePaslode 902400 offers you portability as it does not require hoses or compressors, it lends maneuverability and accuracy in your nail placement, its angled tip allows youto easily access odd and tightspaces. It features a 2-Position Battery Lock thatsecures battery in “OFF” position to preserve energy and battery life. Its Tool-free depth-of-drive nail adjustment allows you versatility in all your woodworking applications, and its no-mar tips prevents scarring and denting wood surfaces especially premium wood, and its Nail lockout feature prevents blank driving. This tool has an ergonomic straight handle design that gives the user a comfortable grip. This finish nailer set includes a heavy-duty adjustable rafter/belt hook, a sturdy carrying case, Owner’s manual, safety glasses and a 5/32″ hex wrench.
Warranty
ThePaslode 902400 Cordless 16g Angled Lithium Ion Finish Nailer comes with a 5-year limited warranty and 1-year full warranty.
Pros
- Lightweight and durable
- 2-Position Battery Lock
- Included accessories
- Nice warranty
- Pro-Grade Depth of Drive Adjustment
- Heavy-duty rafter/belt hook for taking jobsite abuse
- Improved Handle Ergonomics. Straighter handle design for increased wrist comfort, and improved finger grip comfort
Cons
- Some users complained it works poorly in high altitude
13. PowRyte 16 Gauge Straight Air Finish Nailer
PowRyte, one of the most popular and trusted brands when it comes to durable and innovative finish nailers offers you one of the favorites among professional woodworkers, the PowRyte 16 Gauge Straight Air Finish Nailer- this outstanding tool is equipped with Zero nail lock out -to avoid dry firing and lets you know when to reload the magazine, and its split nose design allows quick removal of jammed nails, this feature-packed finish nailer is ideal for all your woodworking projects and is guaranteed durable and long-lasting.
Design and Construction/Materials and Durability
ThePowRyte 16 Gauge Straight Air Finish Nailer has a durable main body and casing crafted form high-quality and sturdy materials guaranteed to last you a long time.
Features
The PowRyte 16 Gauge Straight Air Finish Nailer has an Operating Pressure of 60-100 PSI and drives 16-gauge 3/4-inch to 2-inch nails with a magazine that can hold up to 90 nails, its Zero nail lock out feature rules out dry firing and lets the user now when to reload the magazine. This tool has a split nose design for quick and easy extraction of nails in case nail jammingoccurs, the included no-mar tip preventsmarring the work surface. This finish nailer is ideal for use in installing molding, cabinet and furniture assembly, and other wood finishing applications, it features a 360-degree adjustable exhaust port, and a hook you can use to keep your tool within your reach. The set also includes 2 Allen Wrenches and a bottle of oil.
Warranty
Please contact the seller directly for warranty information for this product. You may also be able to find warranty information on the manufacturer’s website.
Pros
- Durable body and housing
- Can be used in a variety of woodworking applications
- Nice features
- Operating Pressure: 60-100 PSI Nails Length: 3/4-inch to 2-inch
- Reload Indicator for easy visual recognition of low nail quantities to avoid dry firing, tool hook allows the tool to be kept near the user
Cons
- Would be better with LED and case
14. Valu-Air T64C 16 Gauge Finish Nailer 7/8-Inch to 2-1/2-Inch
For all your woodworking projects- molding, paneling, furniture and cabinet assembly, doortrimming, window casing, base boards, chair rail,bedding decorative trim and much more, the Valu-Air T64C 16 Gauge Finish Nailer 7/8-Inch to 2-1/2-Inch is the ideal choice- this extremely durable tool is guaranteed to let you finish your work faster in as little time as possible. This heavy-duty finish nailer has a variety of useful features such as selective actuation trigger that allows transition from single sequential to bump mode, comfortable non-slip rubber grip, and much more.
Design and Construction/Materials and Durability
The Valu-Air T64C 16 Gauge Finish Nailerhas a high-quality and sturdy heat-treated aluminum housing, guaranteed to last for years.
Features
The Valu-Air T64C 16 Gauge Finish Nailerfeatures a selective actuation trigger that letsthe user shift easily from using single sequential to bump mode, it drives 16-gauge straight finish nails from 7/8″ to 2 ½”, ideal for all woodworking applications. This lightweight aluminum-housed finish nailer has a 1/4″ NPT air inlet, andcan operate between 70-110 PSI, it features 360-degree adjustable exhaust, an ergonomic non-slip rubber that provides comfort when using your tool, a non-mar tip to protect soft woods, its aluminum magazine can hold up to 100 nails and lets you work longer without having to reload frequently. This set includes oil, two adjustment wrenches, a custom carrying case and a strip of 2″ nails.
Warranty
Please contact the seller directly for warranty information for this product. You may also be able to find warranty information on the manufacturer’s website.
Pros
- Durable and lightweight
- Variety of features
- Ideal for all kinds of wood
- Value for your money
- Heat treated aluminum hosing designed for heavy duty usage
- Selective actuation trigger allows transition from single dequential to bump mode
Cons
- Occasional nail jamming
15. 3PLUS HT64SP 16 Gauge Straight Finish Nailer
The3 PLUS straight finish naileris a heavy-duty and dependable tool if you need accuracy and ease of work in all your finishing projects. This lightweight and durablenailer is perfect for interior and exterior finish,trim, cabinet assembly and more.
Design and Construction/Materials and Durability
The 3PLUS HT64SP 16 Gauge Straight Finish Nailer has a durable and lightweight Aluminum housing.
Features
The 3PLUS HT64SP hasa free adjustable depth of drive for all your finishing applications, a no-mar tip to avoid damaging your work surfaces, it is equipped with multi-directional exhaust cover that rotates 360° to clear away air and dust from the user, it has a quick clear jam release for easier extraction of nails in case of nail jams, and a Work Contact Element to avoid accidental firing.
Warranty
Please contact the seller directly for warranty information for this product. You may also be able to find warranty information on the manufacturer’s website.
Pros
-
-
- Variety of useful features
- Affordable
- Durable
- No-mar tip protects the work surface from damage
- Multi-directional exhaust cover rotates 360° to direct exhaust air away from user
- Quick clear jam release functions for great ease of use
-
Cons
-
-
- Occasional nail jamming
-
