Whenever electrical-work is required at home or within the professional domain, a screwdriver is understandably the most common tool which is required. Standard screwdrivers are quite sufficient for most of the simple work however, there is a very serious drawback associated with the regular screwdrivers. At least or sometimes even more than half of the screwdriver consists of a metallic shaft which is totally bare. Metals are very good conductors of electricity. In case of contact of the metal part of the screwdriver with any object that is carrying a live electrical current, the entire metal shaft of the screwdriver would become live with electrical current.
In the case of this metal shaft coming into accidental contact with the finger of the user or with some other metallic or conducting object, the consequences can be disastrous. It is for this reason that electricians prefer to use screwdrivers for certain tasks that are covered with insulation material leaving just a little part of the shaft exposed which is necessary for the electrical work.
However, such insulated screwdrivers make even more sense for home use as contrary to the electricians who are professionals in their work and know exactly where and how they would be in danger of getting exposed to electrical current, a home user might not have the right knowledge or expertise to protect himself/herself from accidentally touching the shaft with objects carrying live current.
The Need for an Insulated Screwdriver
The i=Insulated Screwdriver possesses a very special design in that it is extremely tough and is covered with a plastic cover which is non-conductive. This plastic covers the metallic shaft as well as the entire handle. The tip of the insulated screwdriver is,however, left bare as it has to come in touch with the screw.
The insulated non-conductive plastic cover serves as a barrier and protects the user and the screwdriver from accidentally touching or coming in contact with objects that are carring live current as the live parts of an electrical circuit or even the walls of the housing or box which have been grounded. The essence of covering the entire shaft of the screwdriver with a non-conductive and protective coating is that it makes the screwdriver extremely safe to use and for holding it.
There is another very important benefit as well. Besides protecting the user from the possibility of getting hit by an electrical shock, the use of the insulated screwdriver also makes sure that there would no destruction of the electrical circuitry due to shorting of the circuits involved which could happen, in case a bare screwdriver shaft touches a part of the circuitry which causes two sides of the circuits to get short.
Not just a Plastic Coating
Most if not all of the regular screwdrivers available in the market have their handle covered with a plastic coating at the end where the user grips the screwdriver i.e. at the handle. The exposed shaft length of the screwdriver varies and, in some cases,it is twice or more than the length of the covered handle. The presence of the non-conductive and protective plastic coating at the handle part of the screwdriver is not really a guarantee that the handle has been properly insulated.
The actually insulated screwdrivers are designed from scratch to be fully insulated at parts where they are fully covered with the non-conductive protective covering to make them extremely secure and at the same time these insulated screwdrivers also carry specifications related to voltage ratings which specify the intensity of the electrical charge which they are able to resist. It is a common practice that a professionally graded insulated screwdriver would be rated at no less than 1,000 Volts. This is more than sufficient for most electrical systems used at home. It is,however, important to note that as these tools are made out of steel, it is extremely important that the non-conductive protective coating be fully intact to perform perfectly otherwise there would always be a risk of an accidental shock.
Use Only When Really Required
It is for this reason, every home user or electrical work professionals need to fully examine their insulated screwdrivers every time they take the screwdriver out for use on any task. There would be times when such a screwdriver would not really be needed and the work would be easily achieved by using a hammer, for scrapper or even a makeshift pry bar. It does not make sense at all to use the insulated screwdriver for tasks that are easily and perfectly carried out by such tools. An insulated screwdriver should not be used for any other kind of work unnecessarily and should be brought out only when there is a requirement for safety while conducting electrical work where such a screwdriver is necessary. For most another type of jobs, the other cheaper and more appropriate tools should be utilized.
Electrical Tape is not a Substitute
Many home users or even professionals might be inclined to make do by wrapping electrical tape around a regular screwdriver to make it insulated at the desired part of the screwdriver. However, this is not a safe and secure way to ensure protection from getting an electrical shock. The electricaltape does provide protection up to a certain level,however, it does not convert the regular screwdriver into an insulated tool. The first and most important thing is that the insulation material needs to have a particular thickness which needs to be consistent throughout the covered part of the screwdriver. Only then, protection against electrical shocks would be properly insured.
When one wraps an electrical tape around a regular screwdriver, it is quite hard to achieve a certain degree of thickness and consistency over the entire covered part. Moreover, there is no way to give a rating to this type of protection obtained. The user would not be able to ascertain if it is going to offer protection against 250 V or 500 V or 1,000 V. One can only guess this protection level which makes the tape-covered screwdriver insecure and unsafe to use.
Furthermore, the bonding created by the electrical tape on steel is very weak and it can break very easily or get damaged. In case, a user is busy cranking on a certain tool and for some reason, it accidentally slips and slides into a sharp edge of the metal box, the insulation would be easily punctured and the risk of getting electricals shock would increase tremendously. It would be almost as if there were no protective covering on the screwdriver at all as the bare metal part of the screwdriver would come into contact with the metal box.
The Occupational Safety and Health Administration (OSHA) has its standards 1910.269 and 1926 which strongly recommend the use of personal protective gear and equipment. These protective tools include the insulated screwdrivers as well. The standards consider it mandatory to employ safety-related work practices as these prevent the occurrence of electrical shock or any other form of injuries that might consequently occur after the user accidentally comes into direct as well as indirect contact with electrical conductors which are in the energized state.
The two standards also stipulate that if a certain worker or user works near any exposed electrical circuit parts or conductorswhich are energized, such a worker needs to use either insulated tools or in case contact between the tools and the energized parts is necessary then handling equipment needs to be utilized. In an insulated tool set, besides a screwdriver, there are other tools like the Nut Drivers,Cutters, Pliers, Ruler, Knife,and Sockets, etc. and the above arguments hold for all.
Best Insulated Screwdriver Sets in 2020
The 32800 Insulated Tool Set from Wiha with Nut Drivers, Screwdrivers, Cutters, Pliers, Ruler, Knife and Sockets in Rolling Tool Case, 80-Piece Set is an ideal toolset for carrying out tasks related to Maintenance, Repairing and Operations (MRO). It contains 88 pieces and is sufficient for carrying out plenty of MRO tasks and is an ideal solution for Job site safe solutions in the form of insulated tools is contained in a custom designed Molded and Rolling and Carrying case.
This case can be locked and it is water-tight as well. This way, the tools remain protected and secure from vagaries of weather and other harsh work conditions. The manufacturer has tested the entire toolset against voltages as high as 10,000 volts,however, the labeling has been done at a safety rating of 1,000 Volts. Each of the tools in the case has a dedicated spot for storage and in this way, both the secure storage as well as retrieval becomes very easy.
The 32800 Insulated Tool Set from Wiha with Nut Drivers, Screwdrivers, Cutters, Pliers, Ruler, Knife and Sockets in Rolling Tool Case, 80-Piece Set serves as an ideal work site solution for protection against Arc flashes. Professional Test standards like the OSHA, CSA, ASTM, EN/IEC, VDE, DIN/ISO, NFPA70E, etc. are fully conformed to by the Cutters and Pliers that are included in this 88-piece tool set.
Al of the tools in the set have been individually tested for Insulation Integrity by Wiha. While the tools have been designed to protect against ‘accidental’ contact with energized circuits, it is highly recommended by the manufacturer that all circuits (if possible) be properly de-energized before starting to do work on electrical conductors in particular and electrical apparatus in general. The user or workers need to conduct a visual inspection of the tools prior to use to ensure that they are intact with no damage to insulation.
It must also be ensured that there are no indications of wear on the insulation. Moreover, proper eye-wear etc. needs to be utilized prior to using hand tools. It is recommended that NFPA70E certified insulated protective outerwear be used along with these tools. The product dimensions of the toolset are 20.2 x 23 x 15 inches and the shipping weight is 41.4 lbs.
- The tools are ideal for MRO tasks.
- The tools conform to many established standards.
- The toolset is watertight.
- It carries a Proposition 65 warning.
Whether you’re an electrician or you’re just a regular DIY enthusiast, owning a set of Fluke tools is a must. In recent years, the company has earned a name for its products. As a beginner, you can get a grip on the essential IKST7 Starter Kit. It includes five insulated screwdrivers and three insulated pliers.
Perhaps, they are ideal for all kinds of electrician works. Everything is perfect about these tools. Moreover, you’d love to use them with the Fluke Meter. Read on for a full review of these small but handy tools.
What’s in the Fluke Insulated Hand Tools Kit?
As expected, Fluke delivers the utmost safety and comfort for users of all stripes. All tools come in different sizes for optimal versatility. Typically, the package includes five insulated screwdrivers and three insulated pliers. Still, you can buy every item individually. The slotted screwdrivers have three different blade forms and three handle lengths. As for the Phillips ones, you get #1 and #2 tips along with two handle lengths.
When it comes to the pliers, they have specially-profiled straight, half-round, long and slim knurled jaws. Also, they have a side cutting edge suitable for wire cutting. Both types of tools use high-quality German steel and are durable enough to use in harsh environments without breaking. Besides, they have a 1000-volt rating for premium-level protection from electric shocks. Overall, you get a lightweight and useful kit that makes for a viable solution for everyday use.
What are the Pros?
If you’re a perfectionist, then you’d love to have a set of top-notch pliers and screwdrivers. Perhaps, Fluke’s insulated hand tools show immediate quality right from the handles. Instead of using rubber or plastic, Fluke’s items use protected material. That’s why you won’t have to worry about catching an electric shock.
As further proof of quality, the Fluke Starter Kit is a premium production right from the state-of-the-art German facilities. All tools follow the traditional quality standards of the brand. Of course, some may consider the price on these insulated hand tools a bit high. Still, working around energized equipment requires excellent safety. In such cases, spending a little extra for better quality is quite reasonable.
If you’re looking for hand tools that won’t bend or break over time, get the Starter Kit. Thanks to its premium-quality build, each screwdriver has a mix of chromium, molybdenum, and vanadium steel blend.
Like the screwdrivers, Fluke’s pliers also have the same German steel blend. As a result, the manufacturers have managed to create a set of insulated hand tools that have the ultimate resistance to wear.
What’s more, the Fluke insulated hand tools have a certification rating. Standing at 1000V AC and 1500V DC, these items meet all category requirements. Still, this certification may not be enough for the manufacturers as they stepped it up even further. They have tested each tool at 10,000V.
Arguably, this company’s products can pass any safety standards without an effort. Better yet, they have passed all essential safety standards. That way, the buyer is sure that he or she is paying for the highest safety in hazardous conditions.
Perhaps, professional handymen and electricians value comfort a lot. In this regard, the insulation on the Fluke screwdrivers and pliers doubles as an ergonomic cushion. That way, the tools are comfortable to use all day without causing unpleasant strain on your hands.
As for the pliers, the feature that makes their design stand out is the finger guard at the top. Of course, it’s nothing significant. However, it serves as an extra layer of security. That’s how you know that your hand won’t slip up and abruptly contact the metal head.
What are the Cons?
When it comes to pointing out the downsides, this insulated hand tools kit doesn’t really show flaws. Since all items have a certification to 1000 V AC and 1500 V DC, they are the ideal tools for hazardous areas.
Perhaps, the only flaw might be in the packaging. Because it’s textile, it’s prone to wear and tear. If you plan to use the kit extensively, consider buying a sturdier case. If you’re on a budget, you might not like the price tag on the equipment. Still, you have to pay to get value. In other words, the Fluke insulated hand tools are totally worth it for those looking for quality.
Finally, carrying out electrician works always has its risks. Therefore, you shouldn’t compromise quality. Instead, you should invest in this durable, insulated hand tools kit. Whether you’re a professional or a DIY enthusiast, Fluke’s Starter Kit will deliver unmatched safety to the table.
Furthermore, you’ll experience optimal comfort thanks to the ergonomic design of each tool. Of course, the cost may look a bit exaggerated at first. However, you’ll quickly understand why after your first use of the insulated hand tools.
The 989821US 5-Piece 1000V Insulated Pliers and Screwdriver Tradesman Tool Set from Knipex has been designed and engineered to have all the insulated tools either meet or surpass the IEC 60900:2004 and the ASTM F1505-01 standards. These tools have been marked with the certified rating of 1,000 Volts AC. An insulated 9″ high leverage combination pliers, as well as an insulated triangular 5″ x 7/32″ slotted screwdriver, are included in this toolset. The toolset also includes an insulated 8″ high leverage diagonal cutters and an insulated, triangular 4″ X #2 Robertson screwdriver along with a triangular handle 4″ x #2 Phillips screwdriver.
The 989821US 5-Piece 1000V Insulated Pliers and Screwdriver Tradesman Tool Set from Knipex has got product dimensions of 12.7 x 7.4 x 1.6 inches and weighs just 2 lbs. The toolset has been aptly designed as well as engineered to provide extra protection against the possibility of injuries to the user by accidental electrical shocks resulting from energized circuits which carry a voltage upto 1,000 volts AC.
This particular feature has been tested and it is VDE certified. Tools are subjected to voltages as high as 10,000 Volts AC in order to acquire this type of certification. The tools also boast two-color handles that have got very comfortable and insulated grip. Both the Diagonals as well as the insulated Combination pliers are high leverage. The insulated screwdrivers also boast a triangular handle which is ideal for gripping it perfectly. The blades of the screwdrivers, the handle as well as the insulation are simply inseparable. This is ensured by making the insulation materials to mold into the handle and therefore, any impact to the handle cannot wear off the insulation.
- The screwdriver set has got 5 pieces which are individually certified at a rating of 1,000 Volts AC.
- The screwdriver insulation material has been molded into the metal blades.
- The toolset meets or surpasses the IEC 60900:2004 and the ASTM F1505-01 standards.
- Information on warranty is not available.
The 0200105 15-Piece 1000V Insulated Tools Set from BOOHER like all other BOOHER products has successfully passed many different kinds of professional and institutional certification as well as testing. These include the EU chemicals management laws and regulations of environmental protection REACH certification, German Electrical Engineer Association VDE certification, the United States materials testing association testing, U.S. Federal low-temperature drop test, North of the United States military packaging testing waterproof Standard Test MILC-4150J, etc.
Each tool in the 0200105 15-Piece 1000V Insulated Tools Set from BOOHER has been tested with voltages as high as 10,000 Volts however, the rating has been kept at 1,000 Volts for safety purposes.
The 10,000 Volts AC tests have been applied to each tool two times to make sure that using the individual tool is safe and secure for the user. This permitted the tools to acquire the GS/VDE certificate. The product dimensions of the toolkit are 17 x 13.7 x 4.2 inches and the weight of the package is 7.41 lbs. The Pliers that are included in thiski9t are insulated and use CR-V steel while the insulated screwdrivers are made out of 52 steel. Both the Diagonals as well as the Insulated Combination pliers have a high leverage.
The insulating material is a special material which resists both high as well as low temperatures and is also burn-resistant.The 0200105 15-Piece 1000V Insulated Tools Set from BOOHER includes 4 Philips screwdrivers PH0x60, PH1x80, PH2x100, PH3x150mm, 5 Slotted screwdrivers 2.5×75, 3.0×100, 4.0×100, 5.5×125, 6.5x150mm, Long Nose plier 8″, Combination plier 8″, Wire Stripper Plier 6″, Diagonal Cutting Plier 6″, and the Voltage Tester 125-250V Cable Knife(straight). Each of these tools follows strict testing and certification standards and bear the high-quality mark of BOOHER. These tools come in an extremely secure and easy to carry case which is quite sturdy.
- The tools in the kit have been tested and certified against various institutional standards of quality and durability.
- The tools have been tested for low and high temperatures.
- The coating on these tools is burn-resistant.
- The tools might appear small to people with large hands.
The 0153-01-INS Insulated Screwdriver Kit from Greenlee, 9-Piece has a rating of 1,000 Volts AC and is designed and built to surpass the standards set by IEC 60900, ASTM F1505. This toolset has been built with durability in mind and it is also for heavy duty usage. It boasts very accurate and fast contact due to precision machining of the black phosphate plated tips. The design of the screwdrivers is extremely ergonomic and holding and using these tools is very comfortable and they are able to work with a high level of torque. The insulation is double-layered and it is instrumental in providing the screwdrivers with additional safety as well as protection against accidental electrical shock.
The 0153-01-INS Insulated Screwdriver Kit from Greenlee, 9-Piece has got a pending patent for its non-magnetic design and it does not collect metal filings. It is also capable of working with both brass and steel. The weight of the package is 3.38 lbs. and the product dimensions are 17 x 5.2 x 4.1 inches. The screwdrivers in this kit have been individually tested on voltages as high as 10,000 Volts however a rating of 1,000 Volts is used for safety purposes. The screwdriver kit meets the requirements of the Occupational Safety and Health Administration (OSHA) 1910.331-335 standard.
The kit also conforms to other standards like the IEC 60900, ASTM F1505 and NFPA 70E & CSA-Z462. Each tool is properly marked with its 1,000 Volts rating which ensures the worker that he/she is working with a properly tested and rated tool. The insulation has an orange coating which is also impact-resistant.The toolkit has been rolled up in a custom travel carrying case for protection as well as for travel. The tools have been warranted for life by the manufacturer which indicates the quality level and the level of confidence the manufacturer has about their durability.
- The screwdriver kit either conforms to or exceeds many quality standards.
- The screwdrivers in the kit carry a lifetime warranty by the manufacturer.
- The toolkit is very safe to carry and to travel with.
- It does not carry other tools besides screwdrivers.
The Z21013 13-Piece 1000V VDE Insulated Electrician’s Tools Set from RUWOO have been designed and manufactured by RUWOO which is a manufacturer of tools as well as an exporter with a lot of expertise in manufacturing hand tools, electronics, forged goods, plastic products as well as leather goods. The products manufactured by this company are tested by professional institutions and are certified after the testing. The institutions that have tested and certified its products include the IEC International Electrical Commission, German Electrical Engineer Association VDE, the United States materials testing association testing, the EU chemicals management laws and regulations of environmental protection REACH and it has also passed the north of the United States military packaging testing waterproof Standard Test, etc.
The Z21013 13-Piece 1000V VDE Insulated Electrician’s Tools Set from RUWOO includes 3 Philips screwdriver PH0x75, PH1x80, PH2x100mm, 3 Slotted screwdrivers 4.0×100, 5.5x125mm, 6.5×150, Long Nose plier 6″, Combination plier 8″, Voltage Tester 125-250V, and the Diagonal Cutting Plier 6″. The kit has product dimensions of 11.5 x 10.8 x 2.7 inches and weighs just 3.85 lbs. Each of the tools present in this kit has been aptly tested at voltages as high as 10,000 Volts AC however, for safety purposes, these are certified vat 1,000 Volts AC> Each tool carries this testing rating mark.
The tools have also obtained the GS/VDE certificate. The Insulated screwdriver has been made out of 52 steel while CR-V steel has been utilized to manufacture the Insulated Pliers. The insulation material is very high quality and has been tested against both low and high temperatures. It is also burn-resistant. The tools remain workable in the temperature range of -40 degree to 70 degrees. Each of the tools is quality certified and has the ability to last for a very long time while preserving its quality.
- Insulated tool kit carry various institutional certifications.
- Work in a very broad temperature range.
- Carry an insulation material which resists burns.
- Information on the warranty of these insulated tools is not available.
The 48-22-2204 4-Piece Insulated Screwdriver from Milwaukee fully conforms to the OSHA insulated tool requirement. The screwdrivers in the set are also the only UL® Classified screwdrivers which have been rigorously tested against standards set by ASTM F1505-10, IEC 60900:2012,& NFPA 70E. This insulated screwdriver kit provides the user with an uncompromising safety rating. Moreover, to make them even more safe and secure to use, the Milwaukee Insulated Screwdrivers have the capability to retard flames and are also impact-resistant. These screwdrivers also boast a double-layered insulation which provides a very high level of protection against accidental electrical shock. They also carry a visual wear indicator which indicates that wear has occurred and that the tool needs to be replaced after this warning has been indicated.
The 48-22-2204 4-Piece Insulated Screwdriver from Milwaukee has got 4 pieces of insulated screwdrivers. Thescrewdrivers are extremely easy to work with and are also extremely convenient as handling is very easy as well. These products are extremely durable and are manufactured in Taiwan. The handle and shank of the screwdrivers retard flames and resist impacts.
There are Lanyard Holes which prevent against any possibility of drops and accidental damage resulting from these. There are ID Markings on the tools which are easily visible and these help in identifying jobsites. The product also includes a tool pouch which has got the extra capacity to place the tools.The 48-22-2204 4-Piece Insulated Screwdrivers from Milwaukee have been tested against voltages as high as 10,000 Volts AC however, for safety purposes the rating has been certified at 1,000 Volts AC. The tools conform to such qualitystandards as ASTM F1505-10; NFPA 70E and the IEC 60900:2012 standard as these have been rigorously tested against these professional institutional standards.
- Have been tested against standards set by ASTM F1505-10, IEC 60900:2012,& NFPA 70E.
- Are flame-retardant and impact resistant.
- Have been tested at 10,000 Volts AC and rated at 21,000 Volts AC.
- The tool case might not prove to be very robust and strong.
The DWHT66417 VINYL GRIP INSULATED SCREWDRIVER SET from Dewalt, 10 PC saves a lot of space for the user and therefore acts as a great space saver. The reason is that it has got a multi-blade design which uses a quick-release mechanism to let go of the blade and allows the user to install the required one with equal ease. This makes it highly versatile and saves a lot of space which would otherwise have been utilized for a separate tool for each blade. The set is also made availableto the customer in a highly durable tool pouch which keeps everything rolled up in one place. The manufacturer is so confident of its quality and durability that it offers a lifetime warranty for these tools to the user.
The DWHT66417 VINYL GRIP INSULATED SCREWDRIVER SET from Dewalt, 10 PC has got product dimensions of 1.3 x 7.9 x 12.2 inches and weighs just 10.9 ounces. The screwdrivers in this tool set have all been very rigorously tested at voltages as high as 10,000 Volts AC however, for safety purposes, the rating is certified at 1,000 Volts AC. It is 1,000 Volts VDE certified. The multi-blade design offers excellent economy, conservation of materials as well as conservation of space and makes the insulatedscrewdriver set more economical and feasible for low budgets as well.
The insulation material has been directly molded into the blades so that it creates a permanent bonding with them. This feature ensures safety as damage to insulation layers can render the tools insecure and unsafe to use. The availability of the pouch helps in organizi9ng the tools in the toolset in a proper manner.The toolset is ideal for electrical work on a house electrical panel as regular screwdrivers would be unsafe to use in this case as live wires are present even if the breakers are switched off. The small Philips head blades as well as the flat head blades which can be used for electronics while the square drives can be used for sub-panels. The rating of 1,000 Volts AC gives a lot of confidence to the user to carry on this kind of work.
- The multi-blade design ensures space saving for the user along with being economical.
- The pouch provided makes the organization of the tools quite easy.
- The 1,000 Volts AC rating gives a lot of confidence to the user,especially while working on electrical house panels.
- It might not be suitable for high-paced and demanding professional work where changing blades might slow down the work.
The 35890 Insulated Slotted Phillips and Square Screwdriver Set from Wiha ,6-Piece has been designed and built to include an Ergo molded insulated cushioned grip on each of the tools. all the tools in it have been tested and have been certified at 1,000 Volts AC. The tips of these screwdrivers in this set have all got their tips machined with precision machining techniques. The CRM72 tool steel blades are Wiha special tools which have been extremely hardened and then tempered so as to ensure a maximum level of durability. Each of the tools in this 35890 Insulated Slotted Phillips and Square Screwdriver Set from Wiha has been individually tested rigorously to make sure that it has got a high level of installation integrity.
All the tools in the 5890 Insulated Slotted Phillips and Square Screwdriver Set fromWiha ,6-Piece are rated at 1.000 Volts AC for certification purposes,however, they have al undergone tests subjecting them to 10,000 Volts AC. The certification rating is to make sure that they stay safe for the user. The set includes slotted 4.5 and 6.5mm Square 1 and 2, Phillips 1 and 2.
The insulation has been carried out to meet the standards as espoused by the New VDE Specification 0682/part 201, ASTM F-1505-01 as well as the IEC 900. In fact, each tool is separately subjected to tests at a high voltage of 10,000 Volts AC however, these are then certified either at 1,000 Volts AC rating or at 1.500 Volts DC rating for safety purposes. The blades of these insulated screwdrivers are made out of chrome-vanadium-molybdenum steel alloy which has got a black finish and it is hardened. The insulation material is molded directly onto the blade to ensure that it does not get off the blade leading it to become unsafe for users. Soft finish cushions from Wiha are used on the handles as advanced technology is used to mold the materials. The whole kit weighs just 1.1 lbs.
- The screwdrivers use CRM72 tool hardened steel blades
- The tools are rated at 1,000 Volts AC or 1500 Volts DC.
- The insulation has been molded on to the screwdriver blades.
- They are subject to Proposition 65 warning for California residents.
The Kraftform Plus 160i/6 Insulated Professional Screwdriver Set from Wera, 6-Piece has been designed and built to feature Lasertip Slotted and Phillips drive tips as well as the rack. Each of the tools has been tested at voltages as high as 10,000 Volts AC inside a water bath which allows them to be guaranteed as safe for working standards at 1,000 Volts AC. Thus, these tools are certified at this rating. Lasertip micro-rough drive tip of the screwdrivers digs deep into the fasteners to make sure that a perfect fit is produced. This also reduces the cam-out effect. The Kraftform handle which is multi-component fits ergonomically to the user’s hand and this provides a lot of comforts as well as quick torque transfer.
The Kraftform Plus 160i/6 Insulated Professional Screwdriver Set from Wera, 6-Piece carries a lifetime limited warranty for defects against material and workmanship. The product has been engineered in Germany. This set of screwdrivers enables a very high level of force transfer in the form of torque with the least effort. The hand-arm system is relieved during the process. This holds true even in case of intense usage. The high quality of the blades of the screwdrivers surpasses the standards set for torque strength and hardness.
Each tool undergoes rigorous testing for dielectric strength under 10,000 Volts AC as this ensures perfect safety to work at 1,000 Volts AC.The screwdriver set utilizes hard materials for the handle part which enables quick repositioning of hand and there are no chances of the skin sticking to the handle. The slip-resistant zone enables low-loss transfer of torque which leads to lesser than required screw-driving effort.The screwdrivers have been tested at – 40°C which guarantees safety. The product dimensions are 10.4 x 7.5 x 1.4 inches and the weight of the product is just 1.2 lbs.
- The tools are certified at a rating of 1,000 Volts AC.
- The tools require less screw-driving
- The impact tests on these screwdrivers are done at – 40°C.
- The plastic part might be susceptible to wear.
11. 1000V Insulated Screwdriver Set from RDEER CR-VMagnetic Phillips Slotted Pozidriv Torx Screwdriver
The 1000V Insulated Screwdriver Set from RDEER CR-V Magnetic Phillips Slotted Pozidriv Torx Screwdriver operates at very low temperatures as well as very high temperatures. it has been tested in the operating range of -25 degrees to 70 degrees Centigrade and it has performed perfectly according to specifications. The screwdriver blades are made out of Chrome Vanadium steel and the product dimensions are 9.1 x 2 x 5.5 inches while the weight is just 1.76 lbs. as these are very lightweight screwdrivers. The screwdrivers have been aptly and rigorously tested at 10,000 Volts AC and have been subsequently certified at a rating of 1,000 Volts AC. This means that the screwdriver set is just perfect for any electrical work carried out inside the house as the voltages are within this range. The user can feel perfectly safe and secure while carrying out electrical tasks.
The 1000V Insulated Screwdriver Set from RDEER CR-V Magnetic Phillips Slotted Pozidriv Torx Screwdriver has been certified both by VDE and GS as it guarantees perfectly secure and safe working conditions till the limit of 1,000 Volts. However, it must be mentioned that the screwdriver set is certified to work against accidental electrical shocks and in the professional domain, the workers are required to properly de-energize all circuits before initiating any electrical work.
The blades of these screwdrivers are made out of Chrome Vanadium steel which is extremely durable. The tips of the screwdrivers are all hardened with special treatment and also manganese phosphate treatment is applied to them. The screwdrivers have industrial level work capability and are ideal for home DIY work. The handles in these screwdrivers have been designed very ergonomically and are very easy to grip. The grip is further made easy due to their non-slip nature.
- Screwdriver set has been VDE and GS certified at 1,000 Volts AC.
- Have very durable blades made out of Chrome Vanadium steel.
- Are ideal for home DIY work.
- Information on warranty is not available.
The 1000V Insulated Screwdriver Set from RDEER, Phillips Slotted, CR-V Magnetic Pozidriv Torx Screwdriver has been certified as Geprüfte Sicherheit(GS mark) which means it has been tested for safety as a voluntary certification for screwdrivers. It meets the German standards and also the associated European safety standards for such tools as screwdrivers. It has been cleared to operate in the temperature ranges of as low as -25 degrees centigrade to as high as 70 degrees centigrade. This is a wide 95-degree temperature range which indicates product quality. The product has also been certified by the VDE Institute which indicates security of the tool. The user is thus able to rely on these screwdrivers. This certification is given by the institute after a careful investigation of the manufacturer’s facilities, inspection of its products, as well as regular monitoring of production in general.
The 1000V Insulated Screwdriver Set from RDEER, Phillips Slotted, CR-V Magnetic Pozidriv Torx Screwdriver is a state-of-the-art product which has been tested and certified for quality, safety and security.
The metal shaft of these screwdrivers is made out of Chrome Vanadium steel and the testing has been done on voltages as highas 10,000 Volts AC which allows the screwdrivers to be certified at a rating of 1,000 Volts AC. This certification is against accidental electrical shock and it is the duty of the user at home or a professional user at the workplace to make sure that all the circuits have been de-energized prior to the commencement of work using these screwdrivers. The grip on the handles of the screwdrivers is very comfortable. The product dimensions are 9.1 x 2 x 5.5 inches and the weight of the package is 1.76 lbs. It is ideal for home DIY work as well as regular professional work.
- The screwdriver set has been certified at a rating of 1,000 Volts AC and tested at 10,000 Volts AC.
- The screwdrivers are extremely durable as their shaft is made out of Chrome Vanadium steel.
- The screwdrivers offer perfect grip at the handle which is very comfortable for the user.
- Information on warranty is not available.
The 17237 Insulated Electrical Screwdriver Set from Titan Tools, 7 Piece has been designed and built to have magnetic drive tips which help a lot when the screws are at locations which are hard to reach and where the stabi9lity of the inserted screw is in question due to limited space required to handle it. The screwdrivers in this set have been rigorously tested at voltages as high as 10,000 Volts AC and have then been certified for working conditions where the possibility of voltages up to 1,000 Volts AC or 1500 Volts DC might exist. The screwdrivers have passed the tests according to IEC 60900: 2004 standards and are ideal for DIY work environments at home as voltages at homes seldom exceed 1,000 Volts AC.
The 17237 Insulated Electrical Screwdriver Set from Titan Tools, 7 Piece has got product dimensions of 1.6 x 7.6 x 14.6 inches and the weight is just 11.2 ounces. They have got a solid and hardened steel used in their shafts which are covered with plastic handles as well as rubber so that it is easy for the user to grip them properly.
They grip firmly in user’s hands and the grip is strong enough to keep the user fully concentrated on the task at hand. These are ideal for gripping the screws and tightening them on the spot. Even after being used for many hours, the grip would not tire the hand of the user.The 17237 Insulated Electrical Screwdriver Set from Titan Tools, 7 Piece do not wear out with time as these are quite sturdy. Moreover, the toolset covers a lot of the required sizes. The colors used in the screwdriver set are such that they would not mix up with other screwdrivers from other companies held in the toolbox of an electrical work professional which might or might not be insulated. The clear identification helps in spotting them easily.
- The tools do not tire the user’s hands even after hours of use.
- These tools have been tested against 10,000 Volts AC and certified at a rating of 1,000 Volts AC and 1500 Volts DC.
- The tools have got sturdy and robust shafts.
- The screwdrivers carry a Proposition 65 warning for California residents.
The 7 Pcs Anti-rust Insulated Electrician Screwdriver Set from Finder with Bag, Magnetic Tips, Red and Black, Electroprobe, Industrial Level Chrome Vanadium Steel is simply ideal for use for Home DIY applications as well as for Maintenance, Repairing and Operations (MRO), electrical work, and also in assembling flat-packed furniture. The set is comprehensive as it includes one screwdriver electroprobe and at the same time covers all of the common sizes.
For this reason, it becomes ideal for use in gardens, homes and even workshops. The blades in the tools have been finished in black with magnetic tips which are instrumental in attracting the screws so they would not fall off especially in restricted spaces. The free magnetizer is also included and the grip of these screwdrivers has been cushioned as well as insulated in molded form so that no damage to insulation can occur upon accidental impact. Moreover, the slip-resistant handle enables a perfect grip and is very comfortable to hold as well as control. In case, the user gets sweaty hands, the grip still remains quite firm. As compared to other regular handles, this grip enables 70% more torque.
The 7 Pcs Anti-rust Insulated Electrician Screwdriver Set from Finder With Bag, Magnetic Tips, Red and Black, Electroprobe, Industrial Level Chrome Vanadium Steel uses CR-V steel material which is an industrial level steel with proper heat treatment. This enables it to become extremely hard and it possesses a high level of durability as well as resistance.
This makes the screwdrivers and the toolset last for a very long time and perform well as well. The slotted and Phillips insulated screwdriver set works well within a range of 500 Volts AC. The entire set comes along with a proper and professional packaging . Which can also be used as a regular carrying or storage case for these screwdrivers. This set can always be gifted to husbands, dads, and brothers. Metal workers, handymen as well as other craftsmen would simply love it.
- The screwdriver shafts are made out of Industrial level CR-V steel material.
- The screwdrivers are extremely comfortable to grip while working.
- The screwdriver set in its professional packaging serves as a great gift for fathers, husbands,and
- The voltage rating is not as high as 1,000 Volts AC.
The Insulated Screwdriver Set, 1000v Insulated Magnetic Tip Screwdriver Set , Magnetic Tip Screwdriver Set, VS333 includes Philips PH0 x 2-15/16″ (Overall: 5-5/8″), PH2 x 3-15/16″ (Overall: 7-7/8″) , and PH1 x 3-15/16″ (Overall: 7-1/2″) as well as Slotted 0.04″ x 1/4″ x 4-15/16″ (Overall: 8-7/8″), 0.03″ x 3/16″ x 3-15/16″ (Overall: 7-1/2″) and 0.02″ x 0.12″ x 2-15/16″ (Overall: 5-5/8″) screwdrivers.
These are able to provide a highly secure and safe working environment as the tools have been tested at 10,000 Volts AC however, they have been certified at a rating of 1,000 Volts. AC This rating guarantees safety in most of the work carried out in the house. The tools are professional enough to be used a work as well however, it must be noted that all the tools are guaranteed to work against accidental electrical shock and workers are required to take the due precaution of de-energizing the circuits as much as possible before the start of work.
The Insulated Screwdriver Set, 1000v Insulated Magnetic Tip Screwdriver Set, Magnetic Tip Screwdriver Set, VS333 is VDE as well as GS certified. The screwdrivers in this set are extremely lightweight and they possess a very comfortable slip-resistant grip on the handles as the grip is molded. The screwdrivers are coated with red and white colors.
The blades are made out of Chrome Vanadium steel. The manufacturer ensures 100% customer satisfaction and this means that they would fix any problem that arises with any screwdriver set as quickly as possible to ensure that the customer stays happy. In case, the customer is not happy and stay7s dissatisfied, they have the right to return the screwdriver set andget either a full refund or an altogether new screwdriver set from the manufacturer. The product dimensions are 10.5 x 5 x 1.2 inches and the weight is 13.3 lbs.
- The tools are certified at a rating of 1,000 Volts AC.
- The tools are ergonomic and have a very comfortable grip.
- The manufacturer offers a 100% satisfaction guarantee.
- The magnetic tip might not prove to be very strong for heavy screws.
The 35-9305 Insulated Screwdriver Kit from Ideal, 2 Piece conforms to standards set by the Occupational Safety and Health Administration (OSHA) for safe practices and has been VDE certified as well. It also carries other professional institutional certifications from world-renowned institutions and conforms to test standards such as IEC 60 900, EN, DIN, and the ASTM F1505-01 test standards.
The screwdrivers have been tested at voltages as high as 10,000 Volts AC to obtain a certified rating at 1,000 Volts AC which is marked on these screwdrivers to ensure that the home user or the professional worker have a peace of mind while working with these tools in their respective domains. These screwdrivers are ideal for home DIY work as all the voltages encountered are less than 1,000 Volts AC in a regular house. The insulation is molded into the metal shaft to ensure that it would not come off under any circumstances.
The 35-9305 Insulated Screwdriver Kit from Ideal, 2 Piece have got a 4-inch shaft and the handles carry a cushion grip which makes it very easy and comfortable for the user to grip the screwdrivers and apply the necessary torque to drive the screws through. The shafts have been insulated using a dual-injection molding which holds so well into the metal shaft that it becomes impossible for the insulation to wear off and thus any possible damage due to damaged insulation is avoided. The product dimensions are 11.4 x 4 x 1.5 inches and the package weighs just 9.6 ounces.
The screwdrivers are rated at 1,000 volts AC however, it must be understood that these certifications are against the occurrence of accidental electrical shock. It is the duty of every user especially the professional ones at workplaces to ensure that they have de-energized the circuits before they attempt any work with the screwdrivers.
- The screwdrivers have been certified at a rating of 1,000 Volts AC for safe work at homes and also a professional workplace.
- The screwdriver shafts are made out of durable metal which has been molded with the insulation material.
- The screwdrivers have long shafts which can reach easily in deep places.
- The grip on the handle might not be the best in the market.