Best Magnetic Drills in 2020

What Is A Magnetic Drill?

A magnetic or mag drill is a boring device used on metals. The drill has four parts – the magnetic base, a motor, a drill stands, and a chuck or arbor. It is a portable drilling tool with a magnetic base. It can use used with twist drill bits, milling cutters, annular cutters, and other rotary cutters. Using the right kind of cutters, it can also be used to countersink, ream and tap threads.Magnetic drills are versatile tools used to bore holes in metal and wood.

If you are working on steel girders or large pipes. Positioning a fixed magnetic drill can be cumbersome. A portable magnetic drill allows you to handle these jobs in situ. You can use it in a horizontal, vertical and bottom-up position. The portable drills allow for optimal handling and drill ensuring that the piece does not move and you get accurate results. The magnetic strength is related to steel. Usually, they are used on steel plates 3/8 inches thick. These tools are used in product design and development, construction, fabrication, and woodwork.

How to use a Magnetic power drill?

The drill transfers the rotational power generated by the motor to the arbor. The working of this drill is no different from the regular drills. The only differences are that these are magnetically fitted on to the metal piece. This helps get an accurate result on a slippery metal surface. Here is the step by step process of using the magnetic drill.

  • Place the mag drill close to the material where you want to drill holes.
  • Tighten the safety chain around the drill press. This prevents the tool from slipping in case the tool loses power and the tool disengages.
  • Next, fit the drill bit and secure it.
  • Then fill the coolant reservoir with coolant. Usually, the manufacturer recommends it.
  • Align the drill bit with the marks or the pilot holes on the material.
  • Switch on the magnet.
  • Turn on the tools power switch.
  • Begin drilling slowly into the material. Once the cutting groove has been set, apply more pressure. Hold the tool in place until the drilling is complete.
  • Switch off the power and clean the drill chips from the tool. Then move on to the next hole.

The Best Magnetic Drills in 2020

Image 1 of 1

How Does A Magnetic Drill Work?

The working parts of a magnetic drill are :

The Motor – on the magnetic drill is mostly a brush DC motoror a brushless motor. It may run on battery power or electricity. Battery driven magnetic drills are more popular nowadays. The drill may also have grease gearbox and oil bath gearbox motors. The gearboxes are an economical option compared to the oil bath motors. The latter cost more and have a longer life.

The Arbor – gives more control over the drill. The user has the option of using the manual or quick changing option with the cutter.

The Front Support Brackets – connect the arbor and the cutter. It also serves as a guide for drilling holes. They control the depth to which the drill cuts.

The Annual Cutter – is a hollow tool that makes various types of holes. This is because of the various groove options the tool comes with. It is used to drill holes in the workpiece.

The Electromagnet – has a soft metal core that behaves like a magnet when electricity is passed through it. The electromagnet helps the drill to be firmly attached to the material you are working on at a press of a button. This gives the user control over the tool and its boring action. This also keeps the user safe.

The Housing – protects the components from the elements and damage. Some models have plastic housing while others may have metal ones.

Pilot light – is positioned just above the cutter. It helps you see better. The improved visibility helps gain accuracy in work. The tool may or may not have it – but it is a useful feature.

The Best Magnetic Drills in 2020

Image 1 of 1

Types of Magnetic Drills

All mag drills have magnetic bases that stick to the work material. There are 3 types of magnetic drills – hydraulic, electrical and pneumatic. Each of these drills has pros and cons.

Electric powered drills – are lightweight with plenty of power. They carry all the above-mentioned features and are very dependable. These mag drills come in various sizes and some have reversible motors. The only downside is – you cannot use them in wet conditions.

Pneumatic drills – use compressed air to do the job. This means you can use them in wet and flammable conditions as there are no sparks. Their downside is – they are costly.

Hydraulic drills – harness the power of a pressurized liquid. These are specialized tools mostly used underwater as the aquatic environment does not bother them.

Essential Features on a Magnetic Drill

 

Power – is expressed in watts or amperes. There is no right value per se but consider drills above 8 amperes or 1000 watts and above.

Design & convenience of use – A good design will be compact and well-balanced. This well-balanced design will facilitate easy portability and safe use of accurate results. The unit should have carrying handles. Reversible handles lend consistency and stability to the tool. Some have removable handles that make the tool ambidextrous. The handles can be removed and fitted to the right or left side of the tool.

Appropriate size – A larger drill is not always the better drill. Consider the material you are working with, the workspace and then consider the requirements.

The weight– leads the tool stability and portability. When the tool is well-balanced it handles better while doing the job. After the job is done it is easier to move to the next site. The benchtop models weigh less than the floor models. Note the weight of the tool that you are comfortable with – they come with certain features such as a low profile and compact size.

Magnetism – A Magnetic drill should be able to attach to any surface. It offers consistency in work and stability.  When used in vertical applications the strength of the magnet is particularly important. If you work in shaky or unstable environments such as a boat on undulating water this feature lends stability. The magnetism should be powerful enough to stay pressed to the point even on a vibrating surface. Magnets work differently on different models. Some activate only after the drill starts running. Acquaint yourself with the tool as there are specific models to meet your specific needs.

If you are interested in investing in one of these tools then here is what to look for…

The Best Magnetic Drills in 2020

Image 1 of 1

The cutting capacity – of magnetic drill presses differs from model to model. These drills are used to create holes in a workpiece.

The power source in portable mag drill is usually the 20V, 40V or 60V Li-ion batteries.

Safety – Check for the safety rating of the drill. It should have easy to use buttons; automatic turn-offs a control to keep you safe. Some may have overload limits and rubber over-molds. These prevent slippage of tools and other accidents.

The Price – Dissociate price with quality and performance. Do your research and sacrifice additional features for performance and quality. Your tool should be able to handle the work pressure.

Type of Model – There are floor and benchtop models of magnetic drill presses. The floor models are meant for larger projects. Correctly set up they bring you accurate results. The benchtop models are meant for smaller projects. You may use them if there is a dearth of space.

The available space – Pick a model based on the size of the work area. You can opt for a floor drill press or a benchtop drill press accordingly. Both are portable.

The accessories such as spotlights, removable handles improve the functionality of the tool. The kit may include a drill press table, laser guide, tool tray, clamps, press bits, chucks, bit sharpeners, and extensions.

The serviceability of a magnetic drill allows you to prolong its life. You should be able to replace the worn parts with ease.

The Best Magnetic Drills in 2020

 

Best Magnetic Drills in 2020 
Milwaukee 2787-22
Hougen HMD904
DEWALT DWE1622K
Champion Cutting Tool MiniBrute
Jancy Engineering JHM Short Slugger
Mophorn 1200-Watt Magnetic Drill
Cayken SCY-42HD
Mophorn BRM-35
Mophorn MD40
Evolution Power Tools EVOMAG28

 

1. Milwaukee 2787-22

This tool is a part of the Milwaukee FUEL system. This line brings you advanced cordless tools powered by the M18 batteries. These batteries improve the durability, power, and runtime of the tool. The innovations are the PowerState, RedLink and RedLithium technologies.

Features

Milwaukee 2787-22 magnetic drill is fitted with the PowerState brushless motor. This motor delivers maximum power and two times longer motor life. The RedLink Plus intelligence brings you optimal performance and overload protection. There is a system communication between the tool, the battery, and the charger. The RedLithium XC 5.0 battery pack packs superior pack construction. The pack delivers more work per charge and lasts a long time as there is no memory effect.

Besides they have a higher energy density compare to size and weight. There is a self-powered magnetic base. It operates independently of the power source and delivers 2000 pounds of holding force. The tool has a 1.5-inch annular cutter capacity and a 0.5-inch twist bit capacity. There is a two-speed gearbox that delivers 400 and 690 RPM. The drill has a stroke length of 5.75 inches with a motorhead adjustment of 5.125 inches.

Functionality

Milwaukee 2787-22 is a 1.5-inch mag drill that bores faster. It has a strong magnetic hold on 1/4-inch-thick steel. The superior magnetic hold offers greater safety by utilizing permanent magnets. As the magnetic base does not use electricity the magnet does not deactivate if the tool shuts off due to a drained battery. The tool is equipped with an auto-stop lift-off detection. The power to the motor is automatically cut in the event of excess rotational motion while drilling. The tool can drill over 40 holes of 0.8 inches per charge.

Specifications

Milwaukee 2787-22 is a cordless tool that runs on an 18 Volt battery. There is an on-board fuel gauge and M18 and an M12 multi-voltage charger. The tool is 13.75 inches long, 7.5 inches wide and 15.5 inches high. It weighs 28.5 pounds. It offers two speeds – 400 and 690 RPM.

Additional Features

Milwaukee 2787-22 kit includes the tool, the charger, the battery and a core drill bit. The tool is supported by a 5-year warranty.

Highlights

  • Strong magnetic hold
  • M18 Fuel battery
  • Longer runtime
  • Accurate results

2. Hougen HMD904

Hougen makes magnetic drills, annular cutters and hole punchers solving boring and hole making problems through innovations. This powerful, versatile and accurate drill is meant for metal fabrication.

Features

Hougen HMD904 is a portable magnetic drill. This lightweight and versatile drill have a pilot light to light up the work area. This offers clear visibility leading to accurate results. It has a 2-stage magnet that engages full power only when the motor is switched on. This prolongs the magnet’s life. The tool has a heavy-duty casing and a slot drive arbor system and a positive slug ejection. The tool is compatible with many accessories such as drill chucks, countersinks, tapping, etc. There is a lift detector safety system and a gravity-fed coolant system. All the tools are held together in a carrying case.

Functionality

Hougen HMD904 is meant for metal fabrication. It has a large 1.5 to 2-inch capacity. The tool has a pilot light that is useful in dark and dimly lit work conditions. The two-stage magnet brings on 30% more power when the motor is switched on. There is a slot drive arbor for a quick bit and accessory change. Besides, it brings you more accuracy. The kit comes with a coolant pint, a safety chain, and hex wrenches.

Specifications

Hougen HMD904 has a hole-drilling capacity of 0.4375 inches to 1.5 inches. The maximum cutting depth is 2 inches at 450 RPM. The mount arbor or cutter style is 12000 series High-Speed Steel, Copperhead Carbide cutters and 0.75-inch double flat Weldon shank. The tool is 19.625 inches high, 7.75 inches wide and 11.625 inches long. It weighs 34.9 pounds. This is a 115V tool that consumes1035 watts of power at 9 amperes.

Additional Features

Hougen HMD904 drill is accompanied by a pint of coolant, hex wrenches, and a safety chain. The model is supported by a 1-year warranty.

Highlights

  • Large cutting capacity
  • Pilot light
  • Two-stage magnet
  • Slot driver arbor

3. DEWALT DWE1622K

DeWalt is an American Brand of tools used for woodwork, construction, and manufacturing. They are a subsidiary of Stanley Black & Decker.

 

 

Features

DEWALT DWE1622K has a 10-ampere motor with two-speed settings. These combine to bring optimal performance for a great variety of applications. The motor carries overload protection to prevent motor damage and accessory wear. The tool has a chuck that allows you to change the bits quickly without keys. The quick-release handles offer a tool-free change of handles to fit on either side. If the user is right-handed, they can fit in on the right side or vice versa.

There is a magnetic coolant bottle that can be placed on either side of the tool. It can also be placed on the work surface for various tool orientations. The 4.375-inch drill travel can be used for a various heavy-duty application. The height of the motor can be adjusted to give it a greater range and accessory compatibility.

Functionality

DEWALT DWE1622K is a 2-inch two-speed magnetic drill that has a 10-ampere motor. The drill comes with overload protection to prevent any damage to the motor. The drill has a quick-change chuck system that allows you to change the bits without any tools. There is a 3/4-inch Weldon shank and a 1/2-inch keyed chuck.

Specifications

DEWALT DWE1622K has a 10-ampere brushless motor and an 8 feet cord. It has a 2-inch annular cutter capacity. The drill point pressure is 741 pounds and can cut through a 1/2-inch steel plate. The tool’s length of travel is 3.375 inches and no-load speed is 300 and 450 RPM. The tool weighs 33 pounds. The twist bit capacity is 1/2 inch and the tool height is 14.25 inches.

Additional Features

DEWALT DWE1622K kit includes a magnetic coolant tank, safety chain, quick-change 1/2-inch keyed chuck and adjustment tools. The unit comes with a 3-year warranty, 1-year free service and 90-day money-back guarantee.

Highlights

  • 10 Amp Motor
  • Quick Change Chuck system
  • Overload Protection
  • Magnetic coolant tank

4. Champion Cutting Tool MiniBrute

RotoBrute is a hole cutting system by Champion Cutting Tools. This line has been engineered for a heavy-duty job on-site and in the workshop. The drill makes holes bur-free and fast. The line features 6 powerful magnetic drills that handle the largest range of annular cutters. This is an all shop-stop for steel fabrication jobs.

Features

Champion Cutting Tool MiniBrute aka the RotoBrute AC35 is a magnetic drill press that cuts a diameter of up to 0.375 inches to the depth of 2 inches and 6.5 inches of vertical travel. It can exert 2200 pounds of magnetic strength at a high torque of 1200 watts up to 600 RPM. The tool has a quick release arbor that allows you to change accessories quickly and easily.

Functionality

Champion Cutting Tool RotoBrute AC35 can cut through non-ferrous and ferrous metals. It has a convenient cooling system in the arbor reservoir. The tool can be used on job sites and in workshops. It is versatile and can be used for highway maintenance, steel fabrication, trailer and truck manufacturing, mining, shipbuilding, on construction sites, for welding, etc.

The tool wields power to cut through steel, tough alloys, stainless steel. The Brute lubrication optimizes the performance of the annular cutters. The cutters gain a heat resistance besides the lubricant smoothens the cut making bur-free holes.

Specifications

Champion Cutting Tool MiniBrute aka the RotoBrute AC35 has a cutter capacity of 1.375 inches and depth capacity of 2 inches. It weighs 23 pounds and has a 0.75-inch quick change arbor. It accepts the QX1220 Adaptor. The magnetic strength is 2200 pounds and motor speed is 600 RPM. The tool is 23 inches by 14.5 inches by 10.5 inches in dimensions.

Additional Features

Champion Cutting Tool MiniBrute aka the RotoBrute AC35 is supported by a 1-year warranty.

Highlights

  • Lightweight
  • Versatile application
  • Makes burr-free holes fast
  • High torque & magnetic strength

5. Jancy Engineering JHM Short Slugger

This is a mag drill by Jancy Engineering Company (JEC) that delivers precise and powerful drilling. It delivers a precise torque of 430 watts to do the job. The tool is accurate, precise and durable.

Features

Jancy Engineering JHM Short Slugger is a small yet powerful mag drill that packs a punch of 22 pounds. The tool has a metal construction and “Smart Magnet” circuitry that makes it an efficient unit. It has a spindle coolant and a multi-position coolant bottle with a patented internal motor cord. The tool has the optimum power to weight ratio if you are going to be using it at heights such as transmission towers, bridges, etc. You can even change the handwheel position when working in confined spaces. The concealed motor wiring prevents the wires from snagging in tight spaces. It has a gravity-fed cooling lubrication system and a contact and chip guard. The tool boasts an easy guide adjustment and a right or left-hand feed-handles.

Functionality

Jancy Engineering JHM Short Slugger is a stationary drill that maneuvers large pieces of steel into positions that can be time-consuming and cumbersome. This specialized tool will drill holes into all kinds of metallic items in a vertical, horizontal and upside-down position. It is portable thus can be taken along to the job site or can be used on the workbench at home.

Specifications

Jancy Engineering JHM Short Slugger has a 1.187-inch maximum cutter diameter and a 2-inch maximum cutter drilling depth. It consumes 750W of power with an output of 430 watts at 680 RPM no-load speed and can handle a 0.75-inch Weldon shank cutter holder with a 2,5-inch stroke also  exerts 1800 pounds of magnetic holding force and the magnetic foot measures 7 inches by 3.75 inches and  has a 13 feet cable with a plug. The tool is 9.65 inches long and 7.68 inches in width. The height range is 11.02 – 14.17-inches.

Additional Features

Jancy Engineering JHM Short Slugger kit includes a case, a coolant tank, a safety strap, a chip hook, two centering pins, a 5-millimeters hexagon wrench, and a safety guard.

Highlights

  • Smart magnet circuitry
  • Optimum weight – power ratio
  • Ambidextrous three-spoke wheel
  • Integrated LED indicator

6. Mophorn 1200-Watt Magnetic Drill

 

Mophorn sells juice extractors, ultrasonic cleaners, ice cream machines, engraving machine jacks, hand tools, etc. This is a 1200W mag drill that drills holes up to 23mm.

Features

Mophorn 1200-Watt Magnetic Drill has an electromagnetic base. It aids side and back suction also offers stability at work and ensures safety and efficiency and  has a double dovetail guide rail made of aluminum ansd also adds rigidity to the tool and helps adjust the height of the motor whenever required. The rocker lever helps lift the road. It has an anti-slip rubber sleeve making it easy to operate the machine and save time. There are ergonomically designed auxiliary handles that help handle and move the machine. There is a cyclone type intake cooling system. The grid air inlet makes an efficient cooling system that dissipates heat generated by friction.

Functionality

Mophorn 1200-Watt Magnetic Drill finds a wide application in steel construction, bridge engineering, shipbuilding, wind power generation, railway manufacturing, etc. This drill has been designed for precision and speed. It has a magnetic adhesion of 13500N at an optimum rotation of 350 RPM making it an essential tool for steel fabrication and industrial manufacturing works. It can be used horizontal, vertical and bottom-up position.

This drill allows for optimal handling and accurate drilling. The tool is used on steel plates 0.375 inches thick. These tools are used in product design and development, construction, fabrication, and woodwork. The tool can be used with twist drill bits, milling cutters, annular cutters, and other rotary cutters. Using the right kind of cutters, it can also be used to countersink, ream and tap threads.

Specifications

Mophorn MB-23 works on a rated voltage of 110V at 50 Hertz. It has a rated output of 1200W and a speed of 350RPM and can drill holes from 1 – 23mm. It has an MT2 Morse Taper tool holder also has a maximum travel of 210mm and a magnetic adhesion of 13500N. The magnetic base is 200mm by 105mm by 65mm.

Additional Features

Mophorn MB-23 magnetic drill comes with a traditional chuck and a user manual. The tool carries a 2-year warranty.

Highlights

  • Strong power
  • High compatibility
  • Easy to use
  • Wide application

7. Cayken SCY-42HD

 

This company from Shanghai makes magnetic drills, diamond drills, wall cutters, and other such machines.

 

Features

Cayken SCY-42HD is a high-powered tool that is lightweight and compact. The circuits transmit regular power without break or hitches. The tool has an electric soft-starting and step-less speed regulation feature. It has overload protection that regulates speed. The mag drill has high adhesion with a coolant and lubricating device integrated into the machine. This drill press offers 1700W at 450 RPM. It boasts of variable speed. It will accept a Weldon shank at 3500 pounds of magnetic force. This mag drill provides more leverage than any hand drill that allows the operator to cut even holes in the steel sheet. The magnet also allows the drill to open upside down. The drill is CE/ROHS/ISO90001 Certified for safety standards.

Functionality

Cayken SCY-42HD is used for twist drilling, tapping and core drilling functions. The drill is fitted with oil-immersed gears for smooth and frictionless operations. The overload protection prevents the motor from overheating. You can adjust the positioning of the tool. There are a current limiter and soft-start motor that radially increases the voltage.

This gradual increase to the motor allows smooth acceleration with a coupled load. This reduces rush currents that wear the mechanical components of the tool. A current limiter imposed an upper limit on the amount of current allowed to pass through the circuit. The load control is to for the protection of the tool and the circuit. The housing is a diecast alloy frame that protects the circuits and components.

Specifications

Cayken SCY-42HD motor runs at 1700W and 110V at 60 Hertz. The tool offers a variable speed between 100 – 690 RPM. It delivers a maximum magnetic force of 3500 pounds. The maximum boring diameter is 1.65 inches and the depth is 6 inches. The tool can carry a 0.75-inch Weldon shank. It weighs 25 pounds.

Additional Features

Cayken SCY-42HD offer includes a carrying case, a lubricant bottle, and a nylon safety strap. The tool is supported by a 12-month warranty.

Highlights

  • Suitable to drill any surface
  • Variable speed
  • 3500 pounds of Mag force
  • Lubricant reservoir

8. Mophorn BRM-35

 

This is another magnetic drill press with a 1.33-inch boring diameter. The drill delivers a boring pressure of 2700 pounds at 680 RPM. It accepts up to 2-inch-high speed steel annular cutters. It has a maximum boring diameter of 1.37 inches. The tool is attached directly to a metal drilling surface by a powerful electromagnet.

Features

Mophorn BRM-35 is a magnetic drill press that makes 35mm holes on metal, wood, ceramic, etc. The drill is easy to use. It has a rack and pinion gear system that helps control the depth you drill to. Rack and pinion gears help convert rotation into linear motion. The finer the teeth of the gear the finer the least count and movement of the drill head.

The flat toothed section is the rack while the gear is the pinion. The drill is driven by the strong motive power of 980 watts at 110 volts and 50 Hertz. This is a high-performance drill that offers a maximum boring depth of 2 inches and a width of 1.37 inches. The magnetic base delivers 10000N or 2250 pounds of pressure. There is a tool holder that will take different bits to facilitate different jobs. There is a 3/4-inch Weldon shank. This is an annual cutter that has two flats that align with grub screws to fit into place. These are specialized bits used for drilling holes in steel.

Functionality

Mophorn BRM-35 meant to work on steel structures such as bridges, metal furniture, automobile bodies, ships, railroad, etc. It finds application is wind power generation, engineering, manufacturing, etc. This is an ideal tool for the job because it has a strong electromagnet and suction discs on the side and back. This ensures that even in the eventuality of a blackout the tool remains in place.

There is a double dovetail guide tail with a pinion and gear arrangement that allows you to raise and lower the drill. This allows you to make fine burr-free holes of precise measurement. The rocket lever has anti-slip rubber sleeves. The drills ergonomic design lets gravity do most of the work – in case it is used vertically downwards. The streamlined shape is balanced and puts the weight of the motor, casing, arbor, etc. behind the drilling process.

Specifications

Mophorn BRM-35 is a 980W, 110V drill that runs at 50 Hertz. The idle speed is 680RPM. The maximum drilling diameter is 12 – 35 mm and depth is 50mm. The travel distance is 150mm. The magnetic grip is 10000N or 2250 pounds.

Additional Features

Mophorn BRM-35 kit includes a kettle, rope, chuck, silk power chuck and chuck key. The tool comes with a

Highlights

  • Comfortable grip
  • External carbon brush
  • Double dovetail guide rail
  • Wide application

9. Mophorn MD40

This is another mag drill by Mophorn with a 1.5-inch boring diameter. It consumes 1000W and exerts 2810 pounds of pressure. The kit comprises of 6 HSS annular cutter pieces.

Features

Mophorn MD40 is a six-piece annular cutter that drills large holes 10 times faster than the other bits in the market. The drill has a strong motor that works at 1000W consuming 110 volts of power at 50 or 60 Hertz. This is a high-performance tool that bores to the depth of 5 inches. It makes holes up to 1.5 inches wide. The tool is highly compatible with many accessories. It delivers a maximum force of 2700 pounds at 550 RPM. It has a tool holder and will hold a 0.75-inch Weldon shank.

Functionality

Mophorn MD40 is suitable to work on steel for shipbuilding, equipment installation, and manufacturing. It can be used in bridge building, laying railway lines and making rigs, etc. The electromagnetic base has a strong side and back suction. The strong suction uses negative air pressure to stick to non-porous surfaces. There is a partial vacuum created on the surface the drill is sitting on. This offers non-slip stability, safety, and efficiency. This is a huge help while working on vertical and overhead surfaces.

The double dovetail guide offers rigidity that is essential while you are working at heights. The rocker lever allows you to operate the tool with ease. The rocker lever allows you to raise or lower the motor to accommodate the workpieces at different heights. This allows you to save time and effort. The tool has an ergonomic grip for easy handling of the tool. The external carbon brush makes it easy to replace. The cover of the drill ensures your safety and that of the tool.

Specifications

Mophorn MD40 accepts 2-inch annular cutters that bore up to 1.5 inches diameter and depth of 5 inches. The tool exerts a pressure of 2700 pounds. The thinner the metal the lesser the magnetic force. The tool holder can be fitted with a 0.75-inch Weldon shank. The tool weighs 30 pounds.

Additional Features

Mophorn MD40 comes with a magnetic drill, a cutter kit that has a set of bits. The set consists of 6 core drill bits, a stainless-steel pot, and a pilot pin. There are a user manual and a 1-year warranty.

Highlights

  • Wide Application
  • External Carbon Brush
  • Double Dovetail Guide Rail
  • Electromagnet Base

10. Evolution Power Tools EVOMAG28

 

This tool company brings you 20 years of evolution. They have pioneered multipurpose technology through research and development. They applied this knowledge to developing patents and manufacturing tools using them. This way you get a top-quality product with the latest innovations at an excellent price.

Features

Evolution Power Tools EVOMAG28 features a spindle hub and handles. There is an integrated coolant system that powers an annular cutter. There are a jaw chuck, an arbor support bracket, and a switch panel. The motor has carbon brushes and a 6-inch stroke length. The tool fits onto the work surface via a magnetic base. The machine has a left and right handle to facilitate left- and right-hand users. The cutting diameter is 0.4375 inches and 1.125 inches.

Functionality

Evolution Power Tools EVOMAG28 is ideal for working on I-beams, frameworks, fabrications, and bridges. All the tools are fitted into the carrying case. This way you can access them at any height without losing them. The tool is compatible with cutters, Avomag accessories, etc. This is a compact drill that is highly productive, accurate and versatile. It has strong magnetic adhesion.

As building construction uses steel this mag drill is essential for your worksite. As it is lightweight it is also easy to carry. The compact size makes it manageable even in confined spaces. The tool is accompanied by a chuck and key. It has an impressive 1/2-inch twist drill capacity and also features a 1.125-inch cutter. As there is friction created while cutting the tool there is a coolant system on the mag drill.

Specifications

Evolution Power Tools EVOMAG28 consumes 1200 watts of power through a 10 ampere and 230-volt motor. The magnetic force is 2860 pounds through the 1/2-inch chuck, a 0.75 inch and 1.5-inch Weldon cutter of 2-inch depth.

Additional Features

Evolution Power Tools EVOMAG28 is compatible with a large variety of tools such as mini cutters, annular cutters, step drills, etc. Use Evolution cutting fluid to extend the cutter’s life. The tool is supported by a 3-year warranty.

Highlights

  • For industrial use
  • Strong magnetic adhesion
  • Chuck & key included
  • Compatible with may accessories