Any workshop is incomplete without a best miter saws.The best miter saw allows to make accurate miters and crosscuts in the wood by pulling a backsaw or a mounted circular saw down onto a board. The abrasive cut off saw and miter saw are commonly called chop saw or drop saw. The best miter saw’s blade is mounted on a swing arm that pivots up, down, left and right. You can make quick, clean and efficient cuts to make window casings, door frames, crown mouldings, picture frames, etc.
In the standard position, the blade is at 90° from the work surface. The workpiece is held against the fence that steadies the piece while delivering precise cuts at an angle. The primary feature on a miter saw is the index that allows the user to choose the angle of the blade in relation to the fence.Most best miter saws are marked like a protractor to the index with quick settings to common angles such as 15°, 22.5°, 30°, and 45°.
Types of Miter Saws
There are several types of best miter saws
The original miter box and saw consisted of a wooden or plastic 3-sided box with 45° and 90° slits to guide the saw to make miter cuts.
The power or standard miter saw was designed for making straight cross cuts on a workpiece at a wide range of angles.
The compound best miter saw has a head with a blade that can be rotated at various angles. This allows delivering more complex cuts such as the ramp-angled cut used in trim work.
There are single and double compound best miter saws. In the single miter saw the head rotates when angled to one side. One requires flipping the board to get a similar cut in the other direction. The dual miter or double miter compound saw has a rotating head that turns to the right and left.(we have written extensively for the best generators brands)
The sliding compound miter saw has a movable head that goes back and forth on a rail slide. The user can cut an extensive range of boards delivering a wide variety of cuts using this saw.
The laser or LED guided miter saw deliver more precise cuts. The laser is mounted on a disc-shaped washer attached to the saw blade. It illuminates a line and the blade cuts along this path. The LED on the saw illuminates the work area.
Parts of a Miter Saw explained
The latest best miter saws have a laser guide that provides a precise visual indication of the position and direction of the cut. The guide may be a single reference line on the side of the kerf or two lines on both sides.
The saw’s teeth are covered with a blade guard. Recent designs also have self-retracting blade guards. These guards retract automatically when the saw is lowered to the workpiece. They remain retracted while the cut is being made and fall back when the setup is raised. The guards protect the blade and the user, from damage and accidents.
A dust bag is connected to the saw in such a way that it directs the flying sawdust away from the blade and collects it in the bag. Some models have adapters to connect a vacuum cleaner instead of the bag simplifying disposal.
A safety clamp locks the workpiece into position before making the cut. This is a vital feature when working with small pieces of 8 inches and less. The work table is usually 24 inches with stabilizers to be steady it and make a clean cut. The design of the miter saw prevents a kickback as it is held stationary against a fence. The only moving pieces are the head with the saw and the miter index.
The safety features of the saw are its mechanism, firstly it allows hands to be kept clear of the saws edge. Besides the head is drawn back and then lowered to feed forward and cut through the material.
The sliding compound miter saw is portable and easy to set up. It is robust and maintains accuracy even while moving around. As this tool cuts from above, it is not necessary to adjust the blade depth for different thicknesses of workpieces. Just set it up and repeat the cuts.
Most drop saws have adjustable scale plates for table swivelling.
The miter index has adjustable stops at 45 and 90 ° for tilting the head and repeated cuts easily. The table swivels in both directions.
In most saws, the head tilts in the counter-clockwise direction. In some models, the head tilts in both directions. The workpiece is held flat on the table, such that the table swivelling will produce an angled or miter cut. Rotating the head produces a bevel cut while the combination of the two produces a compound cut.(we have written a guide for choosing the best dual fuel generators)
Best Miter saw blades are made of carbon steel and come in two diameters – 10 inches and 12 inches. These may also be coated and optimized for short cuts to cut across the grain of the wood. All the blades are marked with their diameter, the number of teeth, hook angle and kerf. There may be 24 – 100 teeth on a blade larger the number of teeth the finer but slower the cut.
The kerf is the amount of material removed while making the cut. The 1/8 inch is the standard kerf but there are thinner options to cut finer wood. The hook angle indicates how aggressively the blade will pull at the material. A negative or low hook angle causes little board movement while cutting unclamped boards.
The three common teeth designs are the flat top grind(FTG), the alternating top bevel(ATB) and triple chip grind(TCG). Each is designed for a specific edge treatment and material. Thearbor bolt holds the blade of the miter saw the 12-inch blade is fixed using a 1-inch bolt and the 10 inches with a 5/8-inch bolt.
They are reverse-threaded and turn clockwise to be removed and replaced. It is designed with a reverse thread so that the rotational motion of the saw only exerts a tightening pressure on the blade. This prevents the bolt from loosening and flying off injuring the user (we have also written a comprehesive guide about the finish and brad nailers ).
Features on a Miter Saw
The features to look for on your best miter saw:
- Amperes measure the power of the motor. The higher the amps the more the cutting power of the saw.
- Blade size is important as larger the blades, larger the cuts. The blade diameters are 8, 10 and 12 inches.
- Positive stops mark the index at specific angles. These are thumb-activated stops for quick adjustments and precise cuts that reduce the set-up time.
- Depth stopshelp adjust the height of the blade and depth of the cut into the workpiece.
- Articulated blade guards-cover the blade while the saw is not in use. When the saw is raised the guards retract to reveal the blade for a better view of the cutting line.
- Electric brakes reverse the flow of electricity to release the trigger and stop the blade.
- Shaft locks immobilize the shaft and blade, for a safe and easy change of blade.
- Dust chutes and blowers move the sawdust from the work area.
- Dust bags collect the sawdust. (we have also written a comprehesive guide about the Best Brad Nailers)
- Table extensions support the longer stock to deliver an accurate cut.
- Slide and flip fences support the taller stock while making the standard miter and bevel cuts.
- Laser guides or guide lights as described above.
Top 15 Best Miter Saws in 2020
|BEST MITER SAWS|
|9.Evolution Power Tools RAGE3|
|10. DEWALT DW713|
|11. Homecraft H26-260L|
|12.Ryobi 18-Volt ONE+ 7-1/4|
|14. WEN 70712|
|15. Craftsman 21237|
DeWalt makes real tools for real professionals. User-driven innovation is the secret of their success. They challenge themselves to deliver the next level of efficiency and productivity by imbibing the latest R&D into their products.
Design and Build
The DWS780 12-inch Double Bevel Sliding Compound Miter Saw has a powerful 15-ampere motor that delivers 3,800 RPM. The power cord is routed through the rail in the back eliminating interference with the slide.The advanced dust collection system captures 75% of the dust generated during use. The saw is compact and weighs about 56 pounds making it highly portable. The DWS780 features a solid construction and the new XPS cross-cut alignment system with an improved ultra-bright LED light.
The laser-like shadow on the work surface shows the user the precise path for the saw to cut.The unique and accurate alignment system does not require recalibration after use or changing blades. The slide fences support 7.5 inches of a nested crown and 6.75-inch base moulding vertically. The tough stainless steel miter detent plates are designed to withstand the constant rigours at work.
It is perfect for delicate woodworking, heavy-duty framing and deck building. It offers capacity, accuracy and portability to the cabinetmakers, farmers, trim carpenters, contractors and installers.
The DWS780 slide fenced support nested crown moulding up to 7.5 inches and base moulding up to 6.75 inches. It even slides out of the way for bevel cuts. It cuts up to 2 by 16-dimensional lumber at 90°and 2 by 12, at 45°. It allows cutting bevel from 0 – 49° with positive stops at 0 °, 22.5 °, 33.9 °, 45 °, and 49 ° in both directions.
This corded electric tool comes with a blade wrench, a dust bag, a vertical material clamp, a 12-inch carbide blade and a 3-year warranty.
- Powerful motor
- Dust collection system
- Ultra-bright LED light
- Laser guide
- High slide fences
- Steel detent plates
- Large and heavy
Why it is the best of the lot
The DeWalt cuts expertly and walks the fine line between rugged durability and precision sought by professionals. Besides all the pros it has all the desired features on a saw. The pluses are that it does not require recalibration and has an XPS cross-cut alignment system meant for miter cuts.
Hitachi Power tools have won many awards for product design. They have been at the forefront of product development and continually strive for innovation and cutting-edge design.
Design and Build
The C12RSH2 weighs59 pounds and needs 120 volts of AC/DC power source. It 15-ampere motor gives a no-load speed of 4000 RPM to tackle the toughest cutting jobs with ease. The 12-inch dual bevel sliding compound miter saw has a metric measurement system. The positive stops and indications on the miter and bevel scale are easy to read and set. The laser marker guides the user to make anaccurate cut. The compact slide system is meant for the head to slide along fixed rails at zero clearance.
The large sliding fence increases the height to 5 1/8thinches and to cuts up to 7 ½ inches of crown moulding vertically. The miter angle is flexible at 0-57 degree to the right and 0-45 to the left. The 0 to 45-degree bevel angle range to the left and right allow the user to quickly flip the saw blade leaving the material to be cut in place. The vertical handle with soft elastomer grip is for added control and comfort.
The saw is meant for miter, bevel and compound cut to make door frames, window casings, picture frames, crown mouldings, etc.
This Hitachi is at 120 volts on an AC/DC power source. The 15-ampere motor speeds up to of 4000 RPM. The large sliding fence cuts up to 7 1/2 inch of crown moulding vertically. It can make a miter cut between 0-57 degree to the right and 0-45° to the left and a 0 to 45° bevel angle range to the left and right
The box includes a blade, one dust bag, a vice assembly, a box wrench and a holder
- Compact and smooth slide system
- Slide with fixed rails
- Laser marker for accurate cuts
- Powerful 15-ampere motor
- Fence height is 5 1/8th
- Make have some blade deflection
Makita brings you the best in the class engineering. They are a worldwide manufacturer of industrial power toolsand offer a wide range of accessories.
Design and Build
This Makita has a powerful 15-ampere direct drive motor that requires less maintenance. It revs up to 3200 RPM and has six linear ball bearings to deliver accurate cuts. There is a built-in laser that indicates the line of cut and if the blade is turning or not. There are an on/off switch and micro-adjustments for precise ‘left of the blade’ or ‘right of the blade’ cutting. The compact design comes with a patented four steel rail sliding system to increase the rigidity to deliver superior cuts.
Makita LS1016L is the best in class for a wide range of application such as finish work, trim work, decking and flooring applications, remodelling and carpentry. It is a vital tool for professionals such as woodworkers, carpenters, case and base installers, closet installers, cabinet installers, etc. This is the best 10-inch miter saw for the jobsite and benchtop work.
This model of Makita has an increased capacity for up to 6 5/8-inch crown moulding when vertically nested, 4 ¾ -inch baseboard when vertical and 12-inch crosscuts at 90°. It has the greatest crown moulding cutting capacity andthe direct drive gearbox and guard system have anadvanced vertical cutting capacity. The saw miters 0°-52° to the left and 0°-60° to the right. It has positive stops at 0°, 15°, 22.5°, 31.6°, and 45° in both the directions.
The Makita comes with a vertical vice, a 60T TCT saw-slide, a dust bag, a triangular ruler, a socket wrench and a hex wrench.
- Greater capacity
- Accurate cuts with 6 linear ball bearings
- Four steel rail slide system
- Less than 52 pounds thus portable
- Fences bend resulting in bent blades and kickbacks
DeWalt has done it again! They have used another innovation to bring us another versatile tool that would be appreciated by real professionals.
Design and Build
The DEWALT DW716XPS is a double bevel compound best miter saw. It has a cutline blade positioning system for accurate cuts. The saw has a powerful 15-ampere motor that revs up to 3,800 RPM delivering extended power and durability. There is an XPS light has an integrated cross cut positioning system that provides better visibility and adjustment-free cut line indication. It has a stainless steel miter detent plate and a cam miter lock for repeatable accuracy. It also offers adjustments and durability. It is only 44 pounds with a head lock-down pin and a built-in carrying handle for portability.
The DeWalt can do all the work expected of the miter saw and more as it is a double bevelled. A double bevel miter saw is perfect for installing crown moulding with compound miter cuts. A dual-bevel saw will give the full range of compound angles in both directions without having to rearrange the mouldings.
There are tall sliding fences that support 6.625 inches of a nested crown and 6.5 inches of base moulding vertically. The innovative gearbox and belt drive design enhance the vertical cutting capacity. The back-fence design cuts 2 inches by 10-inch lumber at 90° and 2 inches by 8 inches at 45°. The sliding fences support crown moulding up to 6.625 inches nested and base moulding up to 6.5 inches vertically against the fence and slide out of way to make bevel cuts. The double bevel design allows the saw to bevel left and right. The 0° – 48° with positive stops at 0°, 33.9°, 45°, and 48° both swivel in both directions. The 0-50° left and right miter capacity ensure greater versatility.
The package includes a carbide blade, a dust bag, a blade wrench and a user guide. There is a 90 days money back guarantee, a 1-year free service and 3-year limited warranty on all DeWalts.
- Lintegrated XPS laser system
- Adjustable detent plate
- Tall sliding fences
- Double bevel design
- Cam lock miter handle
- Material clamp not included
5. DEWALT DW715
DeWalt is a trade name of an American multinational called Black & Decker Inc. DeWalt is a popular worldwide brand of power tools for woodwork, construction and manufacturing.
Design and Build
This sturdy saw delivers both a versatile setup and excellent accuracy for a variety of applications. The precise stainless steel miter detent plate has 11 positive stops for an easy setup and enhanced productivity. The detent override allows the user to adjust the miter setting without the saw slipping into the miter detents.
There is an easy-to-adjust cam-lock handle to fix accurate miter angles quickly. The saw’s wide miter capacity is between 0 to 50° to the left and the right for a broader range. This lightweight miter saw weighs 42 pounds and has a built-in carry handle for easy portability.
The powerful 15-ampere motor delivers a no-load speed of 4,000 RPM. The adjustable steel miter detent plate has 11 positive stops. The tall, sliding fence facilitates working with crown and base mouldings. There are four steel bevel stops for added versatility.
There is a tall fence support for 5 ¼ -inch crown moulding nested vertically and a 6 ½ -inch base moulding that is set vertically against the fence. This fence also slides out of the way to make bevel cuts. The saw can make 45° bevel cuts through lumber measuring 2 by 8 inches.
The DeWalt is setup for bevel cuts between 0°to 48° to the left and 0°to 3° to the right. The hardened steel bevel index stops at 0°, 33.9°, 45° and 48° for quick and easy processing of the wood.
The DeWalt comes with a carbide blade, a wrench, and a dust bag. All DeWalt products come with a standard 90-Day Money Back Guarantee, 1-Year Service Contract and 3 Year Limited Warranty.
- Powerful 15-amp motor
- Adjustable plate
- Tall, sliding fence
- Fourbevel stops
- No laser guides
Hitachimakes professional grade tools for metalwork, woodwork, concrete that drill, cut and fasten them. They have achieved many firsts in the industry and they continue the tradition of innovation with this miter saw.
Design and Build
The Hitachi is chockfull of useful features such as the 15-ampere motor with a maximum speed of5000 RPM. It is perfect for making miters and crosscuts with precision. The horizontal handle has a vibration-reducing elastomer grip for better control. There is a large table with a stable guide and sturdy support with a built-in clamping system to holdthe workpiece in place. There is a dust collector to collect sawdust from your workspace and the saw’s interior. The use of carbon brushes helps the saw perform better. The saw weighs 26.5 pounds, the lightest in its class.
This 10-inch miter sawis ideal for cutting a variety of workpieces such as plywood,fibreboard, aluminium sashes and hardboard. It has flexible miter angles and compound cutting capability making it an ideal tool for carpenters, framers and woodworkers. The C10FCH2 features the exclusive laser marker for an exact alignment and predictable blade location.
The Hitachi’s blade diameter is 10 inches that revs up to 5000 RPM on a 15-ampere motor. Themiter angle ranges between 0 – 52° to the left and right while the bevel angle is 0 – 45° to the left.
The package contains a 10-inch 24T TCT saw blade (311128), a pivoting flip fence (326704), a dust bag (322955), a vice assembly (322952), a 10mm box wrench (940543), a 4mm hex bar wrench (944458) and a material support extension (321549). The unit comes with a 30-day satisfaction guarantee and a 5-year warranty.
- Precise laser marker
- Highly durable
- Lightweight and portable
- Low-quality covering bag.
7. SKIL 3317-01
Skil was founded in 1924 since then it has been a well-recognized respected brand in the power tool industry. All these decades later it can still be found on construction sites around the world.
Design and Build
The SKIL 3317-01 has a Quick-Mount System for a quick and easy setup on the miter saw stand. There is a laser cutline guide that lights the path the kerf must take for quick and accurate cuts. Thetable extension with right and left extension rails are to support long and large workpieces. The horizontal clamping system holds the workpiece securely against the fence while making the cut. The left and theright lock-off switch areambidextrous. There are nine positive stops with settings of common miter angles. The diecast aluminium fence has ruler marking that ensure accurate cuts. The dust bag collects the sawdust keeping the work area clean. The safety features on the saw are the retractable blade cover, an electric motor brake and a direct drive with a spindle lock. It weighs 25 pounds and runs at 120 volts.
The SKIL 3317-01 makes quick and accurate cuts for crown moulding and other delicate and challenging jobs. You can cut long pieces due to the left and right rails such as two by fours and broad panels.
The SKIL 3317-01 has a 2.5 HP, 15 ampere motor with a 10-inch blade diameter that spins up to 5000 RPM. The arbor size is 5/8 inch the bevel angle ranges from 0 – 45° with bevel stops at these markings. The cord length is 6 feet and the cutting capacity for 0° Miter and 0° Bevel is 4 by 4 or 3 ½ by 3 ½ inches or 2 by 6 or 1 ½ by 5 ½ inches. The miter angle ranges between 0 – 47° to the right and left while the detents are 0°, 15°, 22.5°, 31.6°, 45° to the right and left with positive stops. The pre-set bevel angle detents are set at 45°.
The SKIL 3317-01 comes with a 10-inch carbide-tipped blade, two extension rails and one extension table. There is a horizontal clamp, one dust collection bag a blade wrenchand a limited 3 Year Warranty.
- Laser guide
- Compact and light
- Hardened carbide tipped blade
- Easy to assemble
- The laser is a bit fuzzy
8. Bosch CM10GD
Founded in 1886, the Robert Bosch Tool Corporation is the leading designer, manufacturer and marketers of power tools and rotary and oscillating tools. They also make tool accessories to service your tools to serve you a lifetime.
Design and Build
The Bosch CM10GD comes with a Patented Axial-Glide System that delivers a durable and consistent precision over the tool life. It replaces the sliding rail system with an articulated glide arm that saves up to 10 inches of working room. The resulting enhanced alignment and a smooth glide ensure smooth cuts and complete control over the saw.
The unit has an all-metal bevel lock lever and range selector located in the front for quick adjustments. The crown/chop lock is meant for cutting upright base moulding and nested crown. The head can be fixed in place for maximum chop cutting capacity. The user can make quick, precise and easy adjustments due to the large easy-to-read bevel and miter scales. The large ergonomic ambidextrous trigger handle with a soft grip provides maximum comfort for all-day operation.
All Bosch models have a chute and vacuum adaptor that accepts hoses. The “click and clean” platform keeps the hose in place. The arbor size is 5/8 inch, the blade diameter is 10 Inches and the cord length is 6 feet. The miter angle ranged from 52° to the left and 60° to the right. The tool weighs 60 lbs and works at 120 volts.
Maximize your versatility and cutting capacity with an uncompromising precision of Bosch CM10GD to make all kinds of cuts. As it is compact it can fit into tight spaces increasing productivity.
The Bosch CM10GD has a 15-ampere motor delivers 4800 RPM at no load. The saw has a nominal 12-inchhorizontal capacity, a base 5 ½ inch vertical capacity, and a 6-inch crown capacity against the fence with a 45° spring.
The Bosch comes with a 60-tooth blade, a material clamp, a dust bag and a standard one-year warranty.
- Patented axial-glide system
- Upfront bevel controls
- Crown/chop lock
- Easy-to-read scales
- Ergonomic ambidextrous trigger handle
- A bit heavy
Evolution Power Tools are the pioneers of advanced TCT multipurpose cutting technology. This range of RAGE technology brings you an all-in-one blade.
Design and Build
This saw utilizes the patented RAGE technology that makes it a universal cutting tool. It features a high torque gearbox that reduces motor stress, improves performance and durability. The carbide coated blade delivers fast, precise, burr-free cuts without heat and sparks. The compound tilt and slide mechanism make long-angled cuts.
The security features are a top clamp and chip deflector there is a robust outer casing for durability while using the saw for demanding metallic applications.The added plus is the laser guidance for accuracy. A sturdy and robuststand complements the miter saw the foldable legs make it easy to setup, transport and store.The depth of cut remains the same throughout the life of the blade.
It requires a single tungsten carbide-tipped multipurpose blade that cuts through ferrous metals such as 1/4-inch mild steel with Brinell hardness (HB 200-220). Non-ferrous metals such as aluminium, uni-strut, copper and reinforced cables. And lumber, MDF, reclaimed wood with nails, plastic and composites too.
The RAGE 3 has a 2.5 HP, 15-ampere soft start motor of 1800 watts that produces 2500 RPM. It has a large cutting capacity up to 11.8125 inches by 3 inches. The blade arbor is 1 inch with a dual flange that accepts5/8-inch arbor blades. The maximum width of cut is the 90°miter with an 11.8125 inches depth. Maximum width of cut at 45°miter is 8.25 inches at 90° bevel is 3 inches and 45°bevel is 1.5 inches.
The RAGE 3 package includes A dust collecting bag, a front clamp, a port plug, an extension support bar and a depth stop for faster repeat cuts. There is a top clamp to increase the accuracy of the cut and a limited three-year warranty.
- Multipurpose cutting
- Minimal sparks, burrs & heat
- Simple and slidingmiter cuts
- Check for manufacturing defects
10. DEWALT DW713
DeWalt was founded in 1924 as a trade name by Stanley Black and Decker. They design and optimizes professional workhorse solutions such as tools, accessories and service.
Design and Build
The DW713 has a 15-ampere motor that delivers 5,000 RPM. It features a stainless steel miter detent plate and cam miter lock for durability and repeatable accuracy. The tall sliding fences support 4.5 inches of crown moulding when vertically nested. The lightweight design with a built-in carry handle increases portability. DeWalt laser (sold separately) adds further accuracy to your cuts by lighting the path for thekerf.
This is a perfect saw for cutting baseboards and crown mouldings. The quick, accurate cuts are due to its powerful motor and adjustable cam-lock miter handle. There areconvenient miter and bevel stops at 0° – 45°. The tall fence is meant for oversized decorativemouldings besides a range of miter-cutting and crosscutting applications.
The 10-inch blade is rotated by a 2.5 HP, 15-amp motor producing 5,000 RPM. The miter detent plate features 11 positive stops. The 45° bevel cut capacity is 2 by 6 of lumber while the maximum height of 45° miter cut capacity is 2 by 4. The maximum width of 45° miter cut capacity is 2 by 4 lumber. The 90° cross-cut capacity is 4×4 inches the maximum width it can handle is 2×6. The arbor size is 5/8 inches while the horizontal capacity for a baseboard lying flat is 6 inches. The horizontal capacity for a crown moulding lying flat is 5.25 inches. Its vertical capacity for a baseboard lying against the fence is 3.5 inches and for crown moulding vertically nested is 4.5 inches.
The box contains a blade wrench, a carbide blade and users guide and a 3-year limited warranty. There are a 90-day money-back guarantee and 1-year free service contract.
- Powerful 15-amp motor with 5,000 RPM
- Adjustable miter detent plate with 11 stops
- Positive bevel with 0° – 45°
- Tall, sliding fence
- Saw vibrates at high speeds
This a powerful miter saw by Delta power tools. They have been in the woodwork business for 90 years. The company makes band saws, scroll saws, table saws, etc. And other tools like jointers, drillingmachines, mortisers, planers, lathes, dust collectors and grinders.
Design and Build
This Homecraft is a battery-operatedlaser saw that ensures that the blade aligns to the lumber with ease. It has a spindle lock to hold the blade in place while changing. The powerful 14-ampere motor spins the 10-inch blade at 5500 RPM and cuts through wood like butter. It has denoted stops at the detent plate has 0, 15, 22.5, 30, and 45 degrees marked on it. The saw makes bevel cuts from 0 to 47 degrees and fits on almost all miter saw stands.There is a horizontal clamp to hold the piece in position while cutting.
The Homecraft 10-inchmitersaw is perfect for a DIYer and everyday use. It is perfect for making door frames, window casings, crown mouldings and picture frames. In fact, anything that needs miter and bevel cuts is easy for this saw. With a stand, it can handle longer and larger lumber too.
The Homecraft H26-260L has a 14-amp motor that runs at 5500 RPM. It comes with s 10-inch carbide blade to tear through timber effortlessly or make precise angled cuts. The saw can cut 4 by 4 or 2 by 6 at 90 degrees. It makes bevel cuts into the 2 by 6. It bevels up to 47 degrees and has 45 degrees of rotation to the right and left.
The box includes only the tool. This UL listed saw comes with a 3-year warranty.
- Horizontal clamp
- Laser for anaccurate cut
- Spindle lock to secure the blade
- Ergonomic handle for long hours
- Some users complain about clamps.
The RYOBI 18V ONE+ System covers over 100 unique products that give you ultimate versatility and selection. These tools come with cordless lithium-ion technology that can power through drilling, cutting and fastening. These tools are used for jobs such as electronics, plumbing, air conditioning, trimming, etc. The 18V ONE+ battery platform has been the same since 1996 and will remain the same even for the new products. These batteries fit all the Ryobi tools.
Design and Build
Here is the improved compact and lightweight RYOBI 18V ONE+ miter saw.
There is 9 ball detent stops with the common miter angles. The 24-toothed carbide tipped blade makes clean fast cuts.
The D-handle is ergonomically designed for comfort and grip. There is a spindle lock to change the wrench blade with ease. There is an “exactline” adjustable laser system that aligns the workpiece for an accurate cut.
This compact and lightweight miter saw are easy to move from jobsite to jobsite. And perfect for DIY projects around the house.
It can cut 4.25-inch baseboard laid flat. It makes 90-degree miter cut of 1.5 inches by 4.25 inches and 45-degree miter cut of 1.5 inches x 3 inches.
This makes the saw an ideal tool for small projects. There is an adjustable 0-45-degree bevel, that can be fixed for repeated cuts. The capacity is increased as you can use any RYOBI ONE+ 18V battery to extend the power of the tool.
This product comes with a three-year limited warranty. The package has only the tool with a lithium-ion battery.
- 18 V battery
- Motor speed up to 4,000 RPM
- A 1.25 inches dust port
- A 5/8-inch blade arbor
- Takes blade diameter of 7.25 inches
- Weighs only 15lbs
- Limited power useful only for small cuts
Since their inception as a small machine shop in Baltimore, Black+Decker has steadfastly focused on the customer needs. This earned their reputation for ingenuity, quality and value.
Design and Build
The Black+Decker M1850BD has a lightweight aluminium die-cast construction. It is only 17 pounds thus easy to handle and transport. It has a power capacity of 120 volts with a 72-inch power cord. The length of the cord allows you work at a greater range of distance from the power source. The sawcuts a crown shape or a base moulding with ease. It has a miter range of 0-45° to the left and right, with nine positive stops on the detent plate. The 9-ampere ball-bearing motor provides the power to cut up to 2 inches x 4 inches at 90° and 2 inches x 3 inches at 45°. The saw has 9 positive stops at the standard miter angles with a range of 0-45° to the left and right. The saw head tilts to the left up to 45° for making bevel and compound cuts.
The Black+Decker M1850BD is a portable saw for cutting accuracy. It is ideal for the crown and base moulding jobs besides trimming, framing and craft projects. It is perfect for making door and window frames.
The Black+Decker has a 7.25-inch blade that cuts on corded power. It has a cutting capacity of 2 inches by 4 inches at 90 degrees and 2 inches by 3 inches at 45 degrees. The miter range is between 0 – 45 degrees to the left and right and the bevel range is between 0 – 45 degrees to the left.
The best miter saw comes with a 24T carbide tipped blade, hold-down clamp a dust bag and a blade wrench. All Black+Decker products have a 2-year limited warranty with customer service.
- Compound miter saw with pivoting blades
- Carbide tipped blade
- Small blade for 2 by 4 only
- No laser guide in this model
14. WEN 70712
WEN was founded by Nick Anton in 1951. They bring high quality and affordable tools for their users. Their research and development unit combines tools with electricity to bring you this range of tools.
Design and Build
This WEN 12-Inch single bevel miter saw cuts straight, miter, bevel and compound cuts. The 40-tooth carbide-tipped blade makes precise cuts and the sawdust is collected in the disposable bag. This is to lessen the post-cutting clean-up. There is a hold-down clamp to secure the workpieces while cutting and a support fence at the back to steady the boards while cutting. The depth control knob can be depressed to increase the depth of the cut or released to make it shallow.
There are 9 positive table stops at all the common miter positions of 0°, 15°, 22.5°, 31.6°, and 45° in both directions. The 120 square inches of table top offers a spacious workspace and the support arms extend out 32 inches to support the material being cut. There is an automatic blade cover that retracts while operating the saw and falls back when not in use. This minimizes accidents and maximizes safety.
With these cutting capacity and versatility in making crown cuts, mouldings frames, jambs, etc., this tool finds application in various fields.
The WEN 70712bevels between 0° to 45° to the left and miters from 0 to 45° to left and right. There are nine positive table stops at the common miter angles of 0°, 15°, 22.5°, 31.6°, and 45° on both sides. The 12-inch blade can cut through 3.5 inches by 11.75 inches of lumber with ease.
The WEN 70712 includes a 40-tooth, carbide-tipped blade, a dust bag, a support fence, a hold-down clamp and two workpiece support extensions. Each WEN saw is backed by a one-year warranty, customer service and trained service technicians.
- Powerful motor
- Spacious table top
- Retractable blade cover
- Depth control knob
- Nine positive stops
- Support extensions
- No laser guide
15. Craftsman 21237
Design and Build
The Craftsman has a 10-inch, 60 teeth carbide blade and 15 amperes 120-volt motor that produces 4800 RPM. The diecast aluminium body is light with a slide bearing rails that make short work of every challenge. The telescopic aluminium extensions have stop blocks that offer additional support for long workpieces. The Laser Trac shows the cut line lending accuracy to your work and does not need batteries. The 60 teeth 10-inch carbide blade has more life due to the hardening. And it has more bite due to the higher number of teeth that remove more material than other blades.There is more number of teeth per inch thus it can be used to cut metal and wood. The aluminium construction is light, durable and easily portable. There is some assembly required for use.
The laser-guided portable saw slices through the toughest of materials such as hard and soft wood leaving neat professional work. It can cut joists, studs and posts with ease including the ones with nails.
The cutting tool has a cut depth of 3.625 inches by 12 inches at 90°, 3.625 inches at 45 Degrees. There are Miter Detents at 0, 15, 22-1/2, 31.6 and 45 degrees to both right and left. The bevel index is 0, 33.9, and 45 deg. to the left only with a Bevel Range between 0 to 45 deg. to the left only. The miter index is between 0 – 50 degrees left and right and an arbor size of 5/8 inches. The cord length is 6 feet. The cross-cutting capacity ranges over 1 5/8 inches by 12 inches, 1 5/8 inches by 8 inches and 3 5/8 inches by 8 inches.
The Craftsman comes with a table extension, a stop block, clamps, a dust bag, and a blade wrench. The unit comes with s general warranty of one year.
- 60 teeth carbide blade
- Laser Trac for accuracy
- Extensible support rails
- Align-a-cut absent