Pin nailer vs Brad nailer

If you would like to make beautiful pieces of furniture, you will want to be keen on the fine details. Finishing a piece of furniture requires attention to detail. And for the best details, you will want to have the right kind of nailer. There are two major types of finish nailers that may prove useful. These are the pin nailers and the brad nailers. Let us look at each of these and how you can use them.

pin nailer vs brad nailer

When it comes to the finish nail guns, pin nailers are usually the smallest. These are usually designed to shoot needless nails with a gauge of 23 and have a pin look. The majority of pin nailers will only take nail lengths of 1″ even though there are a few high-end models that can take nail lengths of up to 2″.

Types of pin nailers

Pin nailers can be divided into 2 main categories. These are:

·     Electric pin nailers  These are a good choice for people who are searching for an effective and portable pin nailer.  These nailers don’t require much maintenance like the pneumatic nailers. However, they are more expensive as compared to the pneumatic pin nailers.

·     Pneumatic pin nailers As the name suggests, pneumatic pin nailers are usually air-powered. They use compressed air to drive headless pin nailers. Pneumatic nailers can come in handy for small projects like trimming jobs, DIY renovations, and more.  These are usually cheaper as compared to the electric nailers.


Brad nailers vs. pin nailers: Similarities and differences


Pros of pin nailers

Pin nailers have several pros such as:

·     Helps prevent the wood from splitting: The majority of nailers out there tend to split wood easily. This is why a pin nailer has an advantage over other types of nailers. When nailing using pin nailers, there are no chances of the wood splitting as a result of excessive pressure. This is because pin nailers use small-sized nails that do not leave an impact on the piece that is being worked on.

·     Suitable for trim pieces: Since pin nailers don’t break or split the workpiece, they are a good choice for use in delicate materials. Remember that there are certain carpentry projects that require the use of soft and subtle materials. Therefore, if you will be installing light furniture pieces for your trimming projects, you should use the pin nailer.

·     No visible nail hole:  A pin nailer can help to add to the visual appeal of your project. This is unlike the majority of nailers out there that leave the nail visible, interfering with the look of the final project. Pin nailers have small and headless pins that penetrate deep into the material without leaving any part of the nail visible.

Cons of pin nailers

·    Weak holding power:  While pin nailers will still hold the material well, they have a weak holding power as compared to other nailers. If you need a stronger material hold, you will need to use strong wood glue.  Since the pin nails are headless they add to the visual appearance of the material. However, this is why they have less holding power.

·    Not versatile: There are only a few areas where pin nailers can be used successfully. It can be a good choice for quick fixes on delicate furniture. But if need a nailer that will offer more than that, the pin nailer isn’t a good option.

Brad nailers

Brad nailers are a type of nail gun that has been made to hold two boards for gluing. They can also be used to shoot nails through soft materials. You can pull brad nails using your fingers if you wish to remove them after you have finished your task.

They are made to shoot the bigger 18-gauge nails, also known as brad nails. While these nails are still smaller, they are bigger as compared to the tiny 23-gauge nails. Both pin and brad nails have a wide range of lengths from 2” to 5/8” with other sizes in between.  This is proof of its wide range of applications.

The top brand nailers are a good choice for use in heavy-duty jobs due to their superior holding strength. However, it’s not the right choice for use when you want to avoid splitting wood. In most cases, the 18 gauge nailer will also serve as a 16-gauge nailer and can handle many other tasks including base-boarding.


Brad nailers vs. pin nailers:  Similarities and differences


Types of brad nailers

Just like pin nailers, brad nailers can be divided into:

·     Pneumatic brad nailers : These use air and are suitable for medium-duty finishing tasks. To ensure fast shooting, the nailers come with a shooting gun and cartridges.

·     Electric brad nailers:  These nailers often run on batteries and you can be assured of long product life. While these are a bit inexpensive, they are faster and more powerful. Electric brad nailers are a good choice for heavy-duty carpentry jobs.

Pros of brad nailers

Here are some good reasons to choose brad nailers

·     Strong holding power: Brad nailers can shoot the heavy-duty 18-gauge nails. They have a stronger holding capacity than a 23-gauge nail. While it isn’t as powerful as the 15-gauge nails, it will still handle the majority of the heavy-duty gauge.

·     Versatile: The brad nailer can be used for a wider range of applications adding to its versatility. If you need to use it for your small home improvement project or a professional drawer building task, the brad nailer is a great choice.

·     A great choice for base-boarding:  Base boarding can be a complex job that requires detailed finishing. For the most accurate finishing, the brad nailer is the right tool for the job. This is because it can conjoin high-end materials like the 15 gauge nails that are commonly used for base-boarding.

Cons of  brad nailers

·    Leaves visible nail holes: The brad nailers often leave small holes that are visible on the wooden pieces

·     Easily splits wood: When working on a delicate surface, the brad nailer may not be the right choice. This is because softwood may be unable to withstand the pressure of the tool and may end up splitting.


Brad nailers vs. pin nailers:Similarities and differences


Differences between pin nailer vs brad nailer

In summary, here are the key differences between a pin nailer and a brad nailer …

Type of nail : Pin nailers use a headless nail while brad nailers use nails with a large and flathead. Pin nailers are also compatible with a 23-gauge nail while brad nailers are suitable for 18-gauge nails.

Gauge range : The 23-gauge pin nail can support a wide range of sizes from 2” to 3/8” while the 18-gauge brad nailer can support nails with a dimension of 2” to 5/8”.

Strength of nails : Pin nailers are suitable for delicate materials. Brad nailers are on the other hand suitable for hardwood.

Final thoughts for pin nailer vs brad nailer

For the perfect finishing of your carpentry project, you will need the most suitable tools. In such situations, most professionals use either the pin nailer or a brad nailer. With this guide, you will understand the right choice for your project.

error: Content is protected !!