How To Use A Screwdriver Safely?


Screwdrivers, like salt in cuisine, are an important part of your power toolset. A screwdriver tool is required for any DIYer or specialist. It could be either a manual or a motorized tool. This tool’s main use is to place or loosen screws from surfaces or walls. Prior to actually spinning the handle, the basic screwdriver features a handle and then a shaft with such a sharp point to put over the screw head.

The modified screwdriver is a speed drill, which is a gadget that aids in drilling holes at a quicker rate. The driver’s shaft is composed of robust steel that can handle turning and bending, and the point is strong enough to resist wear. Wood, plastic, and metal are commonly used for handles. The tool has a variety of tip designs, including grooves, slots, and recesses.



Before understanding how to use a screwdriver accurately, it’s necessary to understand how to use it properly.

Screwdriver standard steps to use:

  • Choose a screwdriver depending on the size and form of the point that is appropriate for the screw type.
  • Every time make sure the screwdriver shaft is parallel to the screw.
  • Put forward strain towards the screw only with the assistance of a screwdriver afterward when.
  • To insert the screw, spin the screwdriver right to left, and to withdraw the screw, revolve it anti-clockwise.

Steps to use the screwdriver safely:

  • Maintain a first-aid kit that is conveniently available in case of harm.
  • Have always used the screwdriver to drive screws rather than cutting, levering, or pounding.
  • When operating with the screwdriver, it’s best to use both hands.
  • Using screwdrivers having damaged tips has no use.
  • When working near an electrical outlet, do not use a powered screwdriver.
  • To avoid injury, make sure you’re not operating with a screwdriver that seems to have a tip pointed towards you.
  • Working with a workpiece in one hand and a screwdriver in another is not a good idea.
  • To help the procedure go more smoothly, drill a pilot hole prior screwing.
  • It is not suggested to carry the screwdriver in particular boxes to avoid harm.
  • Please keep screwdrivers out of the reach of youngsters.

Based on the application, choose the right screwdriver:

Screwdriver (manual):  The point is operated by a broad handle and a cylindrical shape steel shank. The handle is bigger than that of the apex to reduce the amount of twisting power required to spin the screw. Every round, the operator must take the screwdriver from the screw head and adjust this before proceeding to the next.

Screwdriver with ratchet:  The inner ball-bearing system allows the operator to tighten the screws several times without raising or adjusting the tip. It permits force to be applied in one axis while permitting free movement in the other.

Magnetic screwdriver: It features a magnetized tip that uses the force of attraction to attract screws towards the driver and keep it from slipping out. It’s ideal for dealing with tiny screws and in cramped situations.


Insulated screwdriver: For safety, it is composed of non-conductive materials. A rubber-tipped screwdriver, for example.

Screwdriver with multiple bits: It features a replaceable tip that is a component of the screwdriver nail puller. It’s a handy tool that may be utilized for a variety of tasks.

Converted drill screwdriver: This is a powered drill that really has greatly shortened the time required to enter or withdraw a screw. It contains an electric generator that spins the power drill connected to the gadget, driving the screw or drilling a hole in the wall. It’s suitable for both domestic and commercial purposes.

Designated power screwdriver: Power screwdriver that has been developed for certain uses. For example, drywall screw weapons are made specifically for hanging drywall. The particular thread screw guns, on the other hand, are only appropriate for collating screw rolls.

Based on the head type of a screw:

Screwdriver (flathead/slotted):  It’s among the most often used hand tools. It features a flattening tip for screwing with such a straight head incursion all across the head, even as the name implies. Architecture, cabinetry, and electrical uses are the most common uses.

Phillips screwdriver: This screwdriver is designed to operate with Phillips head screws with a cross-shaped groove. They have a capacity for bearing greater torque.

Torx/star screwdriver: It’s possible to do it with a 6-point starry screwdriver tip. The screws could be fastened more firmly with this screwdriver since it can provide greater torque. It is appropriate for mechanical manufacturing, vehicles, computer networks, and electronic goods.

Hex screwdriver: An Allen screw or wrench is being used to tighten or loosen hex screws. It’s typically found in faucet knobs, doorknobs, towel bars, and other mechanical components.


Screwdrivers are useful in a variety of sectors, including electronics, repairing mobile phones and gadgets, technical labor, carpentry, and metals fixing. As a result, before choosing a screwdriver, double-check your applications as well as the screw size. Then, to prevent unwanted injuries and achieve desired outcomes, you must follow the health and safety advice provided above. Everest, Dayton, Taparia, Toptul, Venus, Stanley, and more high-quality screwdriver models may be found online. You can also select the appropriate screwdriver type from a broad choice of slotted, Torx, two-way, insulated, striking, poker, nut, and other screwdriver types in various weights and diameters. So, choose the appropriate screwdriver for your job and begin driving the screws properly.


What is the best way to use a screwdriver safely?

With one arm, grip the screwdriver’s point while turning the handle with another. Adjust the position and the tip with your other hand as close to the tangential direction as feasible with your dominant hand. To tighten the screw, turn the screwdriver right to left, then counterclockwise to remove this with the required force.

How do you keep a screwdriver screw in place?

It’s difficult to maintain the screw just on end, but if you have a magnetized screwdriver, especially during tough spots. Put the screwdriver throughout a strip of adhesive tape and loop the adhesive all around the tip of the screwdriver to seal it securely. As individuals drive that screw-in, this should stay in place.

error: Content is protected !!