Top 15 Best Oscillating Multi-Tools in 2019

Best Oscillating Multi-Tools

When it comes to carrying out many specific tasks like making drywall cutouts, removing grout, or undercutting the trim for installations related to flooring, etc. Best  Oscillating Multi-tools are certainly a great help. However, this is not all. An Oscillating Multi-tool serves as a great problem solver for not a few but thousands of difficult situations.  Remodelers all over the world can rely on these tools to carry out a lot of the daily routine activities involved in their work. The power and versatility of these tools can only be gauged by those who pick up one of these tools and actually use it. Anyone who uses these once would never give these up again.

Oscillating Multi-tools are not an old phenomenon. Till a few years back, these were very rarely found even in professional toolboxes. However, as the Oscillating Multi-tools are now available in many different choices and their prices have fallen as well, these are now holding the greatest potential to literally reach the home of every DIYer sooner or later.The Oscillating Multi-tools (OMT) are tools that would be loved by anyone who loves to fix things.

These tools can scrape, saw, polish, sand, and do a lot more. The greatest thing about such tools is that they power thescrappers, blades, and various cutting tools. This way the tools are able to carry out a wide variety of tasks aimed at improving homes. Moreover, these tools are able to go into locations where other tools would be very hard to move. In case someone wants to remove an old adhesive from a concrete slab which has become crusty, all that is required is to clip-on a scraper blade. Similarly, in order to grind the grout which has to be taken out of the ceramic tiles or to carry out some other form of masonry work, either a diamond-edged blade or a carbide-edged blade is what is required to do the job. It is possible to cut nails, metal strips, pipes as well as bolts by using abi-metal blade. Otherwise, it is also possible to use wood-cutting blades whenever it is required to make saw-cuts that are specialized. It might not be possible for other blades to get into areas where the oscillatingmulti-tools would be able to penetrate.

The Development of an OscillatingMulti-Tool

Oscillating Multi-Tools are very new to the world of power tools.  Around a decade ago, power tools were being used to remove casts in doctor’s clinics.  The manufacturers of such tools were quick to realize that there were some unique and extraordinarycapabilities and thus an entirely new product line of home improvement tools was created. After these tools were available in the market as consumer tools, the oscillatingmulti-tools gradually began to be used for home improvement tools. As the name signifies, the oscillating multi-tool has got a cutting motion which is quite different from that of a conventional power saw tool.  The saw utilized in this tool does not saw with a circular movement or by moving back and forth like the jigsaw, a power circular saw or reciprocating saw does. The oscillatingmulti-tool has got a flat metal blade in fact, which oscillates from side to side at a frequency of 20 Kilohertz or 20,000 times in a single minute.

For this reason, the oscillating multi-tool has no kick-back or even grab while it is being utilized to cut in a similar fashion as any other saw would do.  The oscillating cutting tool also quite small in size and as a result of the offset shape of a typical blade, this tool is able to create cuts that are extremely precise as well as curved. This is equally possible in sports that are very tight e.g. the flat gains the floor or corners.

Blades and Accessories

Many different shapes, as well as types of oscillating tool blades, are made by the use of threes tools.  These are inclusive of metal cutting blades, wood cutting blades, diamond and carbide-edged blades, sanding pads of shaped like a triangle that are used to hold adhesive sandpaper of varying grits, or blades that are required for cutting masonry etc. Whenever an oscillatingmulti-tool is purchased, the manufacturer usually includes a few of the basic blades as well as accessories.  Normally, the package also contains a cloth tool bag or a hard case used to hold the tool along with its accouterment.

The cutters, grinders, as well as blades normally wear out with time and it must be taken into account whether the replacements are easily and affordably available or not.  There are many manufacturers of oscillating multi-tools which employ a rather standard mounting system or otherwise adapters which allow the user to mount blades and accessories from other manufacturers or tool makers. moreover, as anaftermarket has developed, other third-party manufacturers of tools and blades are also able to supply these. A lot of the saw blades normally would have a semi-circular shape, they do not spin during the cutting process. The semi-circular shape enables them to make oscillating cuts from several different directions.(we have also  written a comprehesive guide about the Best Laser Levels)

Corded or Cordless Oscillating Multi-Tools

In the market for home improvement tools, both corded as well as cordless oscillating multi-tools ae being solid.  Thecordless models are operated with a battery and therefore they are able to take full advantage of the technical process that has been achieved in the field of Lithium-ion batteries in terms of the power ratings and extended life. Moreover, these cordless oscillating multi-tools, therefore, can be used wherever required. However, it has been observed that after many years of operation, the batteries in the cordless oscillatingmulti-tools are not able to get charge again and have to be replaced.  The replacement of these batteries could prove to be expensive.

The decision regarding which oscillating multi-tool to choose i.e. corded or cordless depends on the power requirements as well. In general, the corded oscillating multi-tools are very powerful as they are deriving their power from the mains.  These tools can easily be used in situations when it is quite easy to plug the tool in an extension cord.  In order to make them workable in areas that are away from the electrical outlet, many manufacturers provide very log cords i.e. a much as 20 feet long cords along with the oscillating multi-tools. It is, therefore, more feasible to go for a corded model unless the user has to use the tool in an area which is very far from an electrical outlet.

Most of the oscillating multi-tools perform the designated work quite well.  The makeup or the technology involved in most of these tools is very similar.  These tools are actually like an electric motor which has been connected to a base which oscillates and at the same time is able to hold different types of sanders and cutters. Most, if not all of the oscillating multi-tools are sold in the form of a ‘kit’ which includes not just the tool but a tool bag or case along with different types of sanders and blades.

Best Oscillating Multi-Tools in 2019 
1. Bosch GOP40-30C
2. DWE315K Multi Oscillating Tool Kit from DEWALT 
3. PCE605K52 3-Amp  from PORTER-CABLE 
4. RK5151K 4 Oscillating Multi-Tool  from Rockwell 
5. Rockwell RK5132K 3.5 Amp
6. MM40-05 Multi-Max 3.8-Amp  from Dremel 
 7. DCS355B 20V XR Oscillating Multi-Tool from DEWALT 
8. Rockwell 3.0 Amp  from Rockwell 
9. BD200MTB from BLACK+DECKER 
10. Oscillating Multi-Tool Kit from VonHaus
11. PCE606K  from BLACK & DECKER 
12. VonHaus Multi-Purpose Oscillating  Tool from VonHaus 
13. GMT15A Multi-Purpose Oscillating Tool from Genesis 
14. OTM1005 from FERM 
15. OT2832  from Dobetter

 

1. Bosch GOP40-30C

The StarlockPlus Oscillating Multi-Tool Kit from Bosch GOP40-30C with Snap-In Blade Attachment consists of a tool which is equipped with a 3-D tool-accessory interface which creates a very strong grip. This acts as a benchmark for a new professional standard in terms of the performance expected of an oscillating tool. The grip allows for the extended surface area between the tool and the accessory. This leads to greater torque transfer and therefore, an enhanced work capacity. The blade changing system does not require any ‘touch’ and allows for easy attachment, removal,and repositioning of the blades.

Productive Power

The oscillating multi-tool employs 4 amps of power and it is, therefore, the ideal tool for plunge cutting, flush cutting, grinding, sanding, scraping and grout removal. The GOP40-30 oscillates cat 20 Kilohertz and produces extremely fine cuts and accomplishes tasks quickly.  It is equipped with a 3.0° oscillating arc which provides better productivity and utilization of the tool.The tool has gearing as well as a metal gear housing which is instrumental in providing an optimal force getting transmitted for increased comfort, durability as well as reduced vibration. The operators are able to match the speed of the tool to the task with the help of the variable speed dial. The range of speed is from 8,000 oscillations per minute (OPM) to 20,000 opm.There is a Constant Response circuitry in the tool which allows for the desired speed even after the load has been increased. (we have written extensively for the best generators brands)

Positioning and Control

The Bosch GOP40-30 weighing only 3.3 lbs. and measuring only 11.4 inches is able to reach hard to reach places such as corners, etc.  There are positions at every 30 degrees to positions accessories in a customized fashion due to a flexible accessory orientation. The availability of the ball-joint cord swivel is instrumental in positioning the tool easily. There is an LED for lighting up dark areas as well. The design of the tool is ergonomic and the grip diameter is just 6.9 inches. Better control is obtained through the soft grip areas,however, the tool itself is extremely rugged and durable.

Accessory Change

The Bosch GOP40-30 allows for accessory change without touching and therefore the operator is able to accomplish blade and accessory changes very easily allowing him/her to stay on task. The blade simply snaps into the tool. There are no loose parts unlike some other tools on the market.  The accessories can be detached from the tool by simply pulling a lever. There is no requirement for wrenches and hot blades need not be touched at all.

2. DWE315K Multi Oscillating Tool Kit from DEWALT

The DWE315K Multi-Material Corded Oscillating Tool Kit from DEWALT is equipped with DEWALT Oscillating Tool Guide System which is instrumental in letting the user set the height or depth for repeatability which would be highly accurate.  The DEWALT accessory kit has 29 pieces and it includes a storage box as well. It is inclusive of the most popular sanding and cutting attachments. The accessory adapter can take accessories from various different brands available in the market. This way, most other accessories can be utilized along with this oscillating multi-tool.  The tool is corded and includes fast-cut wood blade, wood with nails blade, sanding pad, semi-circle blade, accessory storage box, sheets of sandpaper, bag,and the multi-brand accessory adapter.The toolkitis corded which means it can generate the required amount of power for the most difficult of tasks related to sanding and cutting.

Productive Power

The DEWALT DWE315K Multi-Material Corded Oscillating Tool Kit boasts a very powerful 3-ampere motor which is instrumental in providing very strong performance both sanding and cutting. This enables the tool to be very productive and the user is able to carry out tasks quickly and the performance remains very strong. The powerful torque produced by the motor can take care of most tasks in a reliable manner.

Positioning and Control

 The DEWALT DWE315K Multi-Material Corded Oscillating Tool Kit has got a DUAL-GRIP variable speed trigger which allows the speed to be adjusted as per the requirement of the task very easily. This gives more control to the operator. Similarly, the bright LED light lightens up the darkest work surfaces enabling the user to carry out the cutting and sanding tasks without any difficulty.

Accessory Change

The DEWALT DWE315K Multi-Material Corded Oscillating Tool Kit has been equipped with the special QUICK-CHANGE accessory system is instrumental in letting the user change the blades and the other accessories with ease and very quickly. There is absolutely no need for any wrenches to be used.

3. PCE605K52 3-Amp  from PORTER-CABLE

The PCE605K52 3-Amp Oscillating Multi-Tool Kit with 52 Accessories from PORTER-CABLE is equipped with a powerful and durable 3-ampere motor.  This is a corded Toolkit which enables the user to use the kit to carry out tasks that require power and performance for reliable and accurate work. Regardless of how tough the applications are, the PCE605K52 from PORTER-CABLE has got the right level of power and performance to carry out the task in an effective manner.

Productive Power

The corded nature of the PCE605K52 3-Amp Oscillating Multi-Tool Kit with 52 Accessories from PORTER-CABLE ensures that power obtained from electrical outlet powers up the 3-ampere motor to perform the toughest of tasks reliably.  All types of applications such as scraping, cutting, sanding and grinding are very easily accomplished with this much power and the performance quality of the kit is very high. The motor is able to deliver upto 10,000-22,000 oscillations per minute (opm) so that the users are able to finish off their work quickly.

Positioning and Control

The inclusion of the 10-foot electrical cord allows for the kit to be used at places away from the electrical outlet and the range can always be increased with the use of an extension cord.  The kit is very easy to control and position to carry out the tasks with accuracy and precision. The PCE605K52 3-Amp Oscillating Multi-Tool Kit with 52 Accessories from PORTER-The 3-position Over Mold enables a very easy to grip gripping area on the front of the tool as well as in the middle and the rear. This helps to make the grip comfortable for the operator and reduces vibrations. CABLE includes a Depth and Cutting guide which is extremely useful for the operator as it enables the completion of cutting and plunge tasks with precision and control.

Accessory Change

The changing of blades and other accessories is carried out very smoothly by the use of the Tool-free system change. No bolts are wrenched are ever needed to carry out any change of any blade or accessory. The kit includes 52 accessories so that most of the requirements of the user are provided by the kit itself.

4.RK5151K 4 Oscillating Multi-Tool  from Rockwell

The RK5151K 4.2 Amp Sonicrafter F80 Oscillating Multi-Tool with Duotech Oscillation Angle Technology from Rockwell, 12 Piece Kit includes Oscillating Tool, 10 Accessories, and Carrying Bag is the first tool of its kind which allows the user a choice between two different oscillating angles i.e. between 5º and 3.4º. The 5º oscillating angle is used for very aggressive cuts that are required to be done very quickly. On the other hand, the 3.4º angle is preferred by users for more prices as well as continuous control. This versatile toolkit is extremely fast and can be used to cross-cut, rip or make plunge-cuts in wood while using the 5º oscillating angle. The user can then simply switch to 3.4º enabling the user to cut metal pipe or clip nail heads.

Productive Power

The RK5151K 4.2 Amp Sonicrafter F80 Oscillating Multi-Tool allows the user to carry out many different types of productive tasks with a choice of the oscillating angles.  IT can take rust from bare metal for the purpose of priming, remove and scrape hardened adhesives or caulk, etc. IT can take the old grout from between the wall tiles or the floor.  The cutting sped of this tool is extremely fast (5 times that of the basic model). It applies 35 lbs. of force and gives amazing productive power to accomplish various tasks.

Positioning and Control

The tool is equipped with Duotech oscillation technology which allows for power and precision as it provides an optimum oscillation angle. There is a variable speed dial which allows the user to adjust oscillations to tasks in the range of 10,000 to 19,000 oscillations per minute (opm).

Accessory Change    

The Rockwell Hyperlock Blade and accessory changing system lets the user change blades and accessories without requiring any wrenches or any other tools. The tool applies a force of 1 ton to change the blades.  Moreover, the tool is equipped with the Sonicrafter Universal Fit System which allows the user to use blades from other manufacturers as well.

5. Rockwell RK5132K 3.5 Amp  Oscillating Multi-Tool

The Rockwell RK5132K 3.5 Amp Sonicrafter F30 Oscillating Multi-Tool with 32 Accessories and Carry Bag is a premium quality tool.  It has got a 4° oscillating angle combined with constant speed control. It is considered to be the fastest tool available in the market currently. Being fast is not just the only quality it has, it is extremely dependable and workedperfectly in terms of all-around performance. It is robust enough to be pushed hard. It is equipped with a low vibration counterweight which is extremely useful as it cancels out the vibrations enabling the tool is able to run smoothly.

Productive Power

The Rockwell Sonicrafter F30 3.5 Amp Oscillating Tool with 32 Accessories and Carry BagHyperlock™ has a unique capability of applying a one-ton force which holds the blades as well as other accessories and attachments ensuring that these would not slip at all.  The powerful motor and the high level of force give the tool a large productive power as the most difficult of tasks are accomplished quickly as well as reliably.

Positioning and Control

The Hyperlock tool-free blade design enables a very strong clamping capability and therefore there is no chance of any possible slippage.  The blades, attachments,andaccessories remain in place ensuring a firm grip. The lowered vibrations due to the counterweight allow better positioning and control as the user has a firm grip on the operation of the tool.The tool boasts a variable speed selector which allows the user to adjust the oscillation speed to suit the application at hand. This is true for many different applications related to plastics, metal or tiles, etc.

Accessory Change

The Rockwell Sonicrafter F30 3.5 Amp Oscillating Tool has got 32 accessories that are packaged with it. The tool is equipped with a Universal Fit System that allows accessories, sanding attachments and blades from many other manufacturers to work with the tool. This feature is useful to those users who already have blades and accessories available which belong to other brands and would like to utilize these with the tool.

6. MM40-05 Multi-Max 3.8-Amp  from Dremel

The MM40-05 Multi-Max 3.8-Amp Oscillating Tool Kit Dremel with Quick-Lock Accessory Change Interface and 36 Accessories are available in other models which include the tool with a blade, with 24-grit or with both blade and the 24-grit. The tool boasts a 3.8 ampere powerful motor along with an oscillating angle of 3.2 degrees.  This specification enables the tool to become unique in terms of being the highest AMP rated tool at its price point. Along with the 3.2 amperages, the oscillating toolkit comprises of 36 accessories which offer a very high value to the user.

Productive Power

The MM40-05 Multi-Max 3.8-Amp Oscillating Tool Kit Dremel with Quick-Lock Accessory Change Interface and 36 Accessoriesis a premium performance tool with a very powerful 3.8-amp motor which allows the tool to be used for highly demanding applications related to sanding, scraping, cutting, grinding, cutting, etc. on various materials like metal, plastics or wood. The tool has the highest power capability in the tools of its class and it is very versatile as well.

Positioning and Control

The MM40-05 Multi-Max 3.8-Amp Oscillating Tool Kit Dremel with Quick-Lock Accessory Change Interface and 36 Accessories has got variable speed control so that the right oscillation speed can be applied for the right task related to different materials.  The speed settings are retained even when the On/Off switch is utilized to turn the tool on or off.

Accessory Change

The tool also enables a Quick Boost feature which ensures a constant level of speed throughout the most difficult of applications and materials which could otherwise cause a speed change. The various accessories that are included in the kit consist of MM482 Flush Cutting Blade, MM480 Flush Cutting Blade, MM435 Drywall Jab Saw, MM610 Flexible Scraper, MM502 1/16-inch Grout Blade, MM70P Sandpaper sheets for paint, MM14 Hook and Loop Pad,

Grout Removal, MM70W Sandpaper sheets for wood. etc. AS far as changing the accessories are concerned, there is no requirement of any wrenches or other tools.

 7. DCS355B 20V XR Oscillating Multi-Tool from DEWALT

The DCS355B 20V XR Oscillating Multi-Tool from DEWALT boasts a special brushless motor from DEWALT which has the capacity to deliver up to 57% run time as compared to other motors which have brushes. The tool also exhibits quick accessory or blade change as well as variable speeds which allow for speed control for different applications. The tool features a strong LED light which enables the tool to be used in dark places or in the night for precise and accurate cutting, scraping, grinding, sanding, etc.The oscillating angle for this tool is 1.6 Degree oscillation speeds of 0-20,000 opm (oscillations per minute). The tool does not contain the batteries.

Productive Power

The DCS355B 20V XR Oscillating Multi-Tool from DEWALT boasts a special brushless motor from DEWALT has got a brushless motor which gives a longer run time (up to 57%) as compared to other motors that use brushes. The batteries that are needed to run the motor are not included in the package. However, the same model Tool is also available with 20V batteries as another model of the same type from DEWALT.

Positioning and Control

TheDCS355B 20V XR Oscillating Multi-Tool from DEWALT boasts a special brushless motor from DEWALTboasts a DUAL-GRIP Variable Speed Trigger which is instrumental in providing full-fledged application control and high speed as speeds could be adjusted as per the different applications related to cutting, sanding, grinding, scraping, etc. for different materials such as metal, plastics, or wood. The DEWALT Oscillating Tool Guide System enables the user to give custom heights and depths so that the tool can give results that are repeatable.

Accessory Change

The DCS355B 20V XR Oscillating Multi-Tool from DEWALT boasts a special brushless motor from DEWALT has got. A Quick-Change Accessory System which enables the user to change blades, accessories as well as attachments with ease. The presence of the Universal Accessory Adapter ensures universal compatibility as other blades, attachments,and accessories belong to other manufacturers can be easily fitted into the tool and used without any issues. The tool includes 2 wood cutting blades to allow the user to start using the tool right away after purchase.

8. Rockwell 3.0 Amp Sonicrafter from Rockwell

The 3.0 Amp Sonicrafter Oscillating Multi-Tool from Rockwell, with Variable Speed, Universal Blade Fit System and Hyperlock Clamping, 31-Piece Kit with Bag – RK5121 have got a 3.2 degrees oscillating angle which allows for precise control, variable speed as well as fast cutting.  The 3.0 Amp motor offers sufficient enough power to accomplish the hardest of tasks. The tool has the provision of very quick and easy accessory and blade changes and also allows for other brands of blades, attachments,and accessories to be used with this tool. The Hyperlock system in this tool enables very quick change from one task to another.

Productive Power

The powerful 3 Amp motor working on batteries is able to provide sufficient enough power to carry out grinding, scraping, cutting and sanding tasks on plastics, metals,and wood with ease and precision combined with ample amount of control.  The tool can be used anywhere as it does not require any electrical outlet if the batteries are charged. It is capable of prodding a 1-ton of clamping force which can easily grip and hold the blades, accessories,andattachments.

Positioning and Control

The Rockwell Sonicrafter Tool Series has got 4 different models with different amperage and power ratings. However, all of these are capable of generating a one-ton clamping force to firmly grip the accessories, blades,and attachments.  The Hyperlock system also provides a lever which can be very easily released to change the accessories. Thus, control and positioning of the accessories while working is extremely easy. The system is capable of preventing slippage of blades which can be a serious hindrance to the work of the user. Moreover, despite the firm grip, the change from one task to another is very simple.

Accessory Change

The tool features a Universal Fit System and Hyperlock system that allow for a quick and easy change of accessories, blades, and attachments. This Sonicrafter utilizes a Universal Accessory Interface which as the name implies allows for blades, accessories,and attachments from various other manufacturers to be used with this tool. This is especially good for those users who have an inventory of previously purchased blades and accessories. All of these can be used with this tool without the need to worry if the accessory would fit the tool or not.

9. BD200MTB  Oscillating Multi-Tool from BLACK+DECKER

The BD200MTB 2.0 AMP Variable Speed Oscillating Multi-Tool from BLACK+DECKER has a powerful 2 Amp motor along with a free release lever which does not require the use of a hex tray.  There are 6-speed settings in the variable speed dial which allow the user to set the appropriate speed as per the requirement of the tasks involved related to sanding, grinding, cutting or scraping, etc. for different materials such as metal, plastic or wood.  The kit aims along with 13 accessories which allow the user to carry out a large number of applications on this tool with ease and comfort. The motor enables a very powerful grip over the blades, accessories, and attachments so that these can be gripped and controlled better. The Kit contains the Oscillating Multi-Tool, metal/wood blade, sanding blade, rigid scraper blade, storage bag, 12 sheets of Assorted sandpaper as well as a Quick Start Guide.

Productive Power

The powerful 2 Amp motor of the BD200MTB 2.0 AMP Variable Speed Oscillating Multi-Tool from BLACK+DECKER delivers sufficient power to enable the user to carry out the toughest applications involving cutting, scraping, grinding, and sanding, etc. on wood, metal and plastic materials. The AC power source enables powerful motor operation with an oscillating angle of 1.4 degrees. The motor provides productive power to the tool as well as to the user to carry out diverse applications and tasks with comfort and ease.

Positioning and Control

The BD200MTB 2.0 AMP Variable Speed Oscillating Multi-Tool from BLACK+DECKER has got a variable speed dial with 6 speeds in the range of 10,000 to 20,000 oscillations per minute (opm). The user is able to select just the right speed for the task to be carried out properly.  The tool has got a comfort grip over the blades, attachments,and accessories so they can be controlled to do a precise job as required by the use

Accessory Change

The BD200MTB 2.0 AMP Variable Speed Oscillating Multi-Tool from BLACK+DECKER enables the change of accessories, blades,and attachments with ease. It is fitted with a quick-release lever that eliminates the need for a hex key. The tool comes along with 13 different accessories which allow for a very wide range of applications to be performed with ease.

10. 20V MAX Cordless Oscillating Multi-Tool Kit from VonHaus

The tool is cordless and uses a 2 Ah Lithium-ion battery with 20 V max voltage. This enables the tool to be used anywhere regardless of how far the location is from an electrical outlet. The toolkit is available with an accessory set which contains 20 pieces of attachments for scraping, sanding, cutting, etc. The user is able to change an accessory with the flick of a switch. The LED Work light provided in the tool enables the user to perform the task in dark areas or at night. The motor used in this tool is high-powered and provides 8,000 to 10,000 oscillations per minute.

Productive Power

The tool comes along with a charger which has the ability tool charge the 20 AH battery within 50 minutes enabling a lot of productive power for this tool and for the user.  The charger has an LED light indicator. The availability of the tool at all times with such a short charging time is extremely useful for a user having a large workload related to cutting, scraping, grinding, and sanding of materials like plastics, metal,and wood.

Positioning and Control

The tool does not have any cord which helps to position and control the tool easily as compared to a corded tool. It can be used in the outdoors as well without the need to worry about electrical outlets. It also features an LED light which enables the tool to be used either at night or in dark areas if required. The tool is very strong but light as it has a cast aluminum gear head which is durable as well.

Accessory Change

The 20V MAX Cordless Oscillating Multi-Tool Kit from VonHaus comes with 10 attachments as well as selected sandpapers.  IT utilizes a 3.2 degrees oscillating angle to scrape, cut, grind, remove grout, and etc. at variable speeds ranging from 8,000 to 20,000 oscillations per minute. There are a total of 4 wood blades and the tool is capable of quick-release change of blades which means it is very easy for the user to go from one type of task to another.

11. PCE606K from BLACK & DECKER

The PCE606K Porter Cable, 3A, Oscillating Multi-Tool from BLACK & DECKER/DEWALT is a very powerful tool which cuts extremely quickly. The user is able to avail the tool-free accessory and blade change feature to his/her advantage. The lever needs to be released in order to accomplish the change. This frees the user from the use of such tools as screwdrivers, wrenches, etc. The tool uses rectangular slots for blades and as such blades that can fit rectangular slots are used in this tool. The over-mold handle has 3 positions and on an overall basis, the product is a high-quality product.

Productive Power

The PCE606K Porter Cable, 3A, Oscillating Multi-Tool from BLACK & DECKER/DEWALT is a powerful tool with its motor generating sufficient enough power to accomplish the various applications related to carrying out scraping, sanding, cutting and grinding related work on materials such as wood, metal or plastic.  This enables the user to enhance his/her productivity and handle a lot of work in a short time. The cutting capability of this tool is very impressive as it cuts very easily and quickly.

Positioning and Control

The PCE606K Porter Cable, 3A, Oscillating Multi-Tool from BLACK & DECKER/DEWALT weighs 4.65 lbs. and its dimensions are 15.8 x 4.5 x 8.5 inches. It can be carried around very easily and it is extremely easy to handle while it is being used to carry out sanding, cutting, scraping, and grinding tasks on plastics, metals,and wood. The 3 position over mold handle ensures firm gripping and positioning as the user puts it to use.

Accessory Change

Changing accessories, blades,and attachments in this The PCE606K Porter Cable, 3A, Oscillating Multi-Tool from BLACK & DECKER/DEWALT is like a breeze. The quick-release lever is required to be released to let go of the accessory and it can be changed very swiftly and then a new blade, attachment, accessory etc. is clamped in. The process is quick and easy and helps to reduce the downtime while varying out many tasks in series.

12. VonHaus  Oscillating  Tool from VonHaus

The VonHaus 2.3 Amp Corded Multi-Purpose Oscillating Tool from VonHaus with 6 Variable Speeds, 15 Accessories Including E-Cut blade, Half Moon Saw, and Carry Case is literally the ultimate DIY tool.  It has been designed by the manufacturer to cut, sand and saw various different materials like plastic, wood, gypsum, fastening elements like nails, staples, etc. and other non-ferrous metals as well. The tool works great on soft wall tiles in places like the bathroom and also equally well for scraping small surfaces and working on dry sanding.  The tool has been designed in such a way that it enables the user to make good use of it near the edges as well.

Productive Power

The 2.3 Amp Corded Multi-Purpose Oscillating Tool from VonHaus is a very powerful tool and utilizes its 2.3 Amps motor to create the force necessary to carry out the sanding, cutting, grinding, and scraping tasks very efficiently and at a quick pace. The tool enables very high productivity on part of the user due to its superb cutting abilities. It can easily cut through laminates, wood,plastic, plasterboard, and carpet to enable the user a very wide range of task accomplishment in the shortest possible time.  The half-moon shape allows of the saw allows plunge cut to the edge of another material at an angle of 90 degrees.

Positioning and Control

The 2.3 Amp Corded Multi-Purpose Oscillating Tool from VonHaus is extremely easy to grip and handle while it is being used. IT is able to get very close to the edges thereby allowing the user to continue working close to the edges.  The wide range 11000-20000 oscillations speed per minute guarantees the right sped for the right application involving sanding, grinding, scraping and cutting wood, plastic and metals.

Accessory Change

The 2.3 Amp Corded Multi-Purpose Oscillating Tool from VonHaushas got attachments that come along with it which include a scraper Knife, E-cut blade for cutting metal, Half Moon Saw, and a Sanding Base Pad. There are 9 sanding pads included which allow various gradients for a very nice and consistent finish. It is extremely easy to change the accessories, blades,and attachments for carrying out various tasks linked to cutting, scraping, grinding and sanding and the changeover is extremely quick.

13. GMT15A  Oscillating Tool from Genesis

The GMT15A Multi-Purpose Oscillating Tool from Genesis can be used as a close-quarter saw, detail sander, grout removal tool or a power scraper. It is extremely versatile in this regard.  It can be used literally for a myriad allocationlike remodeling, home repairs, and renovation, etc.  The tool boasts a 1.5 Amp motor that has the capability to deliver 21,000 oscillations per minute (opm).  The tool is very robust and sturdy due to the die-cast aluminum gear housing. The flange which has got 4 pins is able to hold the accessories firmly in their place without any possibility of slippage etc.  The tool has performed perfectly well is carrying out such jobs as trimming door jambs for flooring installation, removing glue, paint o old caulking, chiseling out door hinges, taking up vinyl flooring or trimming cabinets prior to installation.

Productive Power

The 1.5-amp motor of the GMT15A Multi-Purpose Oscillating Tool from Genesis works perfectly fine to create sufficient enough force to carry out the difficult tasks involved.

It is,therefore, able to handle projects that would otherwise take hours to implement.  The all-in-one solution capability of the multi-tool is instrumental in reducing the task time and increases the productivity of the user many folds as a result.  The tool is able to provide the capabilities without the use of extremely expensive specialty tools, etc.

Positioning and Control

The weighs less than even 4 lbs and therefore, it is very light as it has been constructed by making use of die-cast aluminum gear housing which has the characteristic of improving the heat dissipation of the tool besides keeping it robust and light at the same time. This not only increases the life of its servicing ability but also makes it extremely easy to use while working. The 4-pin flange is able to hold the accessories very firmly so that the task is accomplished in a safe manner. The projects are completed very quickly at speeds as high as 21,000 i=oscillations per minute (opm).

Changing Accessories

The accessory, blade and attachment change is quick and easy. There are many accessories that come along with the package and these include the 30mm Flush Cut Blade, Rigid Scraper Blade, 3-inch Hook-and-Loop Sanding Pad, 30mm Flush Cut Blade, and an Allen Wrench.

14. OTM1005 from FERM

Power Tools OTM1005 from FERM and Ferm Oscillating Multitool Kit – Led-Light, 2.3A, 16 Accessories, Dust Extractor, Storage Case has 280 watts power and it enables all types of daily routine works without any hassles.The tool boasts an LED work light which allows the tool to become useful in the night or in dark areas where the visibility is poor. It is an extremely versatile tool.  It is able to produce speeds of up to 20,000 oscillations per minute and is therefore extremely powerful and fast so that it can be used for any kind of tasks. It does not lack the strength to carry out the toughest of jobs.

Productive Power

The 2.3 Amperes, 280-watt power motor is the powerful engine for the Power Tools OTM1005 from FERM as it provides the right productive power to the user with a mix of the force it provides as well as the type of accessories that come along with it. It is able to quickly cut and handle jobs related to grinding, sanding, and scraping on wood, metal, and plastics, etc.

Positioning and Control

The tool offers variable speed control of speeds up to 20,000 oscillations per minute (opm) and it adapts itself to every application with an adjustment of speed by the user.  The usage of the right speed for different applications on different types of materials ensures that the job would be carried out in a perfect manner. The tool has a perfect grip as well as a truly ergonomic design along with a vacuum adapter.  It is extremely handy and easy to use and provides comfort to the user.  The cord that comes along is 3 meters long which enables the user to extend the workspace to make the work easy in the work area.

(we have also  written a comprehesive guide about the finish and brad nailers ).

Accessory Change

The tools come along with 5 different attachments and these are a plunge-cutting saw blade, a saw blade for ceramics, a scraper, an HSS segment saw blade and an abrasive baseplate.  These accessories are easily exchanged with the help of the hex key that is contained in the package.The package also includes a Universal collet system which is instrumental in enabling the use of accessories blades and attachments from Dremel and many other brands along with this tool without any compatibility issues.

15. OT2832  from Dobetter

The OT2832 2.8-Amp Variable Speed Oscillating Multi-Tool Kit from Dobetter, with LED Work Light and Tote Bag is a powerful tool which provides sanding, grinding, scraping, and cutting ability on various materials such as wood, metals,and plastic. The tool is extremely versatile in the kind of applications in which it can be used along with many different types of accessories.  This particular toolkit has the capability to handle both the open back as well as closed back accessories.

Productive Power

The 2.8 Amperage motor of the OT2832 2.8-Amp Variable Speed Oscillating Multi-Tool Kit from Dobetter, with LED Work Light and Tote Bag is able to provide enough torque for the user to carry out the toughest of applications related to cutting, grinding, scraping and grinding on various metals, plastics and wood as well as on other materials with comfort and ease.  The user productivity is enhanced not just by the power available but with the use of the right accessories and blades for each task.

Positioning and Control

The use is able to use the right speed for each application that he/she carries out. The speeds in oscillations per minute are related to the different tasks at hand as well as the material used. Each task is performed at just the right speed. Maintenance of the speed is also important during the task and the power rating of the motor ensures that indeed, this would be the case. The tool is easy to handle and grip as well.

Accessory Change

The tool has got a tool-free clamping system which makes it unnecessary to use wrenches, screwdrivers, etc. or any other tools in order to take the previous accessory out and load the next one on to the tool. The clamping system exerts a powerful force to hold on top the accessory or blade when use but is able to release it without the help of a tool for a quick change. Both open back and closed back accessories are usable in this tool.

Related posts