Table Saws || BUYING GUIDE
Table saws are essential woodworking tools. It has a circular blade mounted on an axle.This assembly is driven by a motor that turns the blade to cut through the material. The blade protrudes from a slit in the table, and the material is pushed against it. This pushing action not only directs the material but cuts through it. The blade can be moved up or down to vary the depth of the cut. The higher the blade protrusion, the deeper the cut. The angle of the blade can be controlled to make a cut at an angle. A table saw has a base, a table with extension wings, and rails with the rip fence. There is a motor, trunnions, gears to raise the tilt, the blade, and the axle.
Know Your Table Saw
The base holds the working parts of the saw. These parts are the trunnions, the axle assembly, the sector gears, and a motor. In cabinet saws, all these parts are covered by an enclosure that extends all the way to the floor. While open saws have only a metal box enclosing the parts mentioned above, the legs extend all the way to the floor. Hybrid saws combine the features of an open and cabinet base. These are designed to reduce the noise level.
The table should be flat and made of durable material. It should be adequately supported to cut any workpiece. Usually, cast iron is used to weigh it down and give stability. The extensions may be made of the same material, stamped steel or “webbed” cast iron. The only drawback is that the lighter the saw, the more it vibrates and shifts. The state-of-the-art methods of the foundries ensure precise flatness up to 0.0005 tolerance. The extensions extend to the right and left using wing bolts. These increase the work surface area.
Thinking of buying a table saw? Here is a summary of its parts.
The rip fence with rails should be well-designed to ensure an accurate cut. The rip fence guides the wood as it is being cut along its length. It can be positioned to any width to cut within the range of the saw. The fence rides or slides along the rails. These are attached to the tables front and rear edges. The fence keeps the blade parallel to the blade’s plane irrespective of the position of the fence.
The miter gauge and slot system are used to make crosscuts. The miter gauge is made of a metal protractor attached to a metal bar. The bar rides along a miter slot in the surface of the saw. The gauge can be set to crosscut between 30° – 90°. Some manufacturers offer add-on tools for repeatable incremental-angle positioning, stop blocks, longer fences, etc. These advanced features are useful for delivering precise crosscuts.
The motor, the trunnions, the axle or arbor assembly, and the gears are the essential mechanical parts of a saw. The robust quality of these components ensures the life and durability of the saw. It means it keeps the capacity to cut heavy and delicate stocks while adjusting and holding the settings.
Best Table Saws in 2022
It is designed for mobility on the job site supported by a single action setup and pack-up.
It was Robert Bosch’s intention to alleviate hardships to promote the physical, moral and intellectual development of people. He supported a future-focused, result-oriented development that also led to a better lifestyle. All Bosch tools are the “core to the crew”.
Design and Build
Bosch 4100-10 is portable as it works seamlessly with the gravity-rise stand on wheels. The riving-knife and the anti-kickback pawls comprise the Smart-Guard System meant for protection. The barrier guard is a barrier to deter blade contact. It also offers an unobstructed view of the point where the blade meets the workpiece.
The Square-Lock rip-fence offers enhanced clamping for accuracy. The large aluminium top offers an increased work surface and material support with a 25-inch ripping capacity. Soft-start circuitry and circuit breaker prevent damage to the motor due to an intense start-up or tripping. While the constant response circuitry maintains the speed under load.
It is a job-site ready model with a heavy-duty construction mounted on wheels with composite rubber tires. The modular table saw has a blade guard and a riving blade that takes three positions. There are anti-kickback pawls for safety besides the barrier-guard assembly. The entire system can be assembled and disassembled in seconds and has tool storage, too.
The Bosch 4100-10 has a 15-ampere 4-horsepower motor with the no-load capacity of 3650 RPM. The model includes a 10-inch blade that is perfect for dado applications, fine and rough carpentry. The blade diameter is 10 inches and it has a bevel angle range of -2° to 47°. It maximum depth capacity at 45 is 2.5 inches and at 90 is 3.125 inches. The model has a 25-inch rip capacity for ripping 4 feet wide sheets.
The 4100-10 comes with a gravity-rise stand with wheels, a 10-inch carbide blade, a throat-plate insert, a rip fence, a miter gauge and a push stick. there is a smart guard system that has a barrier-guard device and anti-kickback pawls. The unit comes with a 1-year warranty and a 30-day money-back guarantee.
Skilsaw is making power tools since 1924. They invented their flagship power tool – the first portable circular saw. Skilsaw is a subsidiary of Chevron Ltd.
Design and Build
The SKILSAW SPT99-11 features the legendary Worm Drive that quadruples the productivity. It delivers a 3.625-inch cut and a 30.5-inch rip capacity at maximum torque. There is a rugged rolling stand on wheels with easy-load handles. The 16-inch wheels offer unsurpassed mobility over all terrains making it easy to load and unload from the truck.
There are a precise rack and pinion fence that adjusts for measurements quick and smooth ensuring accurate cuts.The dust port takes away the debris to clean up the workspace. The outfeed and the left support allow you to make larger cuts single-handedly.
There is a stand handle to push the saw smoothly into the truck bed or on the job site. The Dual-Field motor runs cooler due to the dual copper windings that increase the surface area for heat loss. This keeps the motor 40% cooler for you to run it longer.
It cuts through full sheets of timber and plywood. As the saw is loaded on wheels it can be carted on a job site or a workshop. This saw is ideal for cross-cutting and ripping while working with hard, soft and engineered woods.
The SKILSAW SPT99-11 comes with a 15-ampere Dual Field Motor turns at 5000 RPM that makes 3.625-inch cut and 30.5-inch rips. It means it cuts and rips 4 times faster. The 16-inch wheels make it easy to cart the saw anywhere. Simply load, unload and cart, pull up the stand, complete your work and pack up to leave.
The SKILSAW SPT99-11 comes with a rolling stand, a 24-Tooth carbide blade, a miter gauge, a smart guard system including an anti-kickback device. There is a dust elbow, an insert plate, a push stick, a wrench and rip fence. The saw comes with a 180 day stay true guarantee and a one-year warranty.
Nowadays, there’san ongoing shrinking tool trend. Still, the quality will always be a top priority, and DeWALT doesn’t disappoint. If you’re a DIY fanatic, you’ll love the compact DWE7485 table saw. The 8-1/4-inch blade is a consumer favorite. It’s an excellent substitute for bigger 10-inch blade saws.As expected, the DeWALT DWE7485 is perfect for small-time cutting or ripping. It’s worth every penny, and there’s a reason for that. Here’s a thorough review of the product with all its key pros and cons.
Firstly, the most formidable feature of the DeWALT DWE7485 is its compact size. With dimensions of 26.6 x 14.1 x 27.1 inches, this table saw offers extreme portability. Thanks to its effortless transportation, you can bring it everywhere. Also, the DWE7485 is perfect for limited spaces when you want to store the machine away.
In terms of weight, this DeWALT model weighs only 53.3 pounds. Keep in mind that its dead load is merely half compared to Bosch 4100-09 and DeWALT DWE7491RS. When you buy this table saw, you get a lightweight, easy to assemble, and easy to store product.
Similar to its size and blade dimensions, the DWE7485 is smaller than its predecessor – the DWE7480. Of course, a smaller sized blade equals more minor cutting and ripping capacity. Still, you get the same 15Amp motor. What’s more, the 5,800RPM no-load speed is far more than expected. As a result, you get clean and accurate cuts of any hardwood or plywood you put on the line.
Moreover, you get a particular fence configuration. Thanks to the rack and telescoping pinion rails, you can adjust the fence to your liking. Typically, you can rip materials as long as 24.5 inches for optimal rip capacity. Besides, you get a reasonable cutting depth of up to 2-9/16 inches at 90°.
As you may expect, DeWALT delivers a less friction surface for improved cutting quality. Furthermore, the table saw features on-board storage for blade guard assembly. The metal roll cage base has a more durable configuration than the common plastic one.
Apart from that, buyers get other conveniences. Some of them include a non-through cut riving knife, anti-kickback paws, blade change wrenches, a miter gauge, plus a push stick. What’smore, there’s a power-loss reset that prevents potential accidents. You won’t have to worry about the power going out and unexpected system restarts.
DeWALT is one of the most renowned brands for construction tools. Therefore, you can always expect premium quality from such a manufacturer. When it comes to DWE7485, things aren’tmuch different. The table saw is ideal for various applications, including mitering, non-through cutting, ripping, and crosscutting.
Of course, you’d think that this product costs a fortune. On another note, the DWE7485 is n’tonly more lightweight but also less expensive than the DWE7480. All in all, you get an unmatchable value for the huge selection of features. Most of all, you get a three-year warranty period and a ninety-day money-back guarantee if the product displays flaws.
As already mentioned, the DWE7485 is relatively light; it weighs a whole 10 lbs more than its 10-inch DW745 cousin. Moreover, the job site saw may have trouble ripping plywood. Perhaps, the lack of a built-in outfeed table makes the job more challengingthan one would expect.
No Compatibility with Dado Stacks
Arguably, one of the worst drawbacks of all DeWALT job site saws is that they cannot employ dado stacks. Of course, this issue is not model-specific. Still, many woodworkers may hesitate to buy this machine just because of this downside.
Last but not least, the dust collection on the blade guard may serve you well. That’suntil you find out there’s tension in your hose. Ultimately, the riving knife may deflect and cause some unwanted trouble. Also, there are some complaints about the poor manufacturing process. To be specific, some customers have reported mislocated and unparallel holes. Ultimately, they compromise the assembling quality and, in turn, the cutting precision.
All in all, the DeWALT DWE7485 is a well-rounded job site table saw. For the price of $299, you’llget a formidable force that you can bring everywhere with you. Of course, there are some negligible flaws in the design. Still, the buyer receives tremendous power for the compact and lightweight job site saw.
However, if you’re after a full-sized table saw, don’t buy this product. The DWE7485 is excellent for simple DIY tasks, but it can’tmatch a full-sized saw. Perhaps, you can add it to the out-feed table. Besides, let’snot forget the real purpose of this product. It works well on stationary or folding stands.
Finally, the DeWALT DWE7485 is perfect for contractors and carpenters with intermediate experience. This product is suitable for people looking for an affordable, budget-friendly solution. After all, this gadget can turn out to be a hidden treasure for those on a limited budget. You don’thave to splash out a large chunk of your budget. The 15Amp motor is powerful enough for the job. Also, you can effortlessly take this compact powerhouse everywhere.
DeWalt is a well-known manufacturer of power tools and accessories. Their tools are used the world over as their reliable tools are also backed by an extensive service and repair network.
Design and Build
The DEWALT DWE7491RS Table Saw is portability and functionality rolled into one model. The smooth and accurate roll and pinion fence system on the rolling stand quickens the fence adjustment process. Narrow rip cuts can be made using the patented support.
The power to cut through soft and solid wood comes from the 15-ampere motor. The fence rail is telescopic as it extends and retracts making it easy to transport. Besides the flip-over feature help cut narrow rip cuts. The rolling stand can be broken down and set up easily for easy portability.
All the components are designed for stability using excellent quality materials. It features heavy-duty wheels that are easy to roll over curbs, debris and steps. The 26.25 inch by 22-inch table is made of an excellent material for support and stability. There is an onboard storage space for easy access to the machine components and push stick.
The DEWALT DWE7491RS is ideal for making bookshelves, entertainment centres, cabinets, rip filler boards and rip hardwood floorboards. It is perfect for trim carpenters who work with wainscot, mouldings, etc. As this machine rips and crosscuts lumbar. It can be used to make deck boards with rail caps and railings also can be used for remodelling and cut 4*8 square feet, 3 inch and 2*12 square inch materials – can be used to make dados, mortise, rabbets and tenons.
The maximum cutting depth is 3.125 inches at 90 and 2.25 inches at 45. There is a 2-inch dust port to attach a vacuum cleaner. This keeps the work area clean improving visibility. It has a 32.5-inch (82.5cm) rip capacity it cuts through the material for shelves and moulds.
The DeWalt table comes with a 24 tooth, 10-inch carbide blade, a push stick, a rolling stand and a miter gauge.
Technology has been a common thread that binds the Hitachi brand. Besides the superior design and durability the knowledge share behind all the divisions is incorporated in their designs. Durability gives longevity to their tools.
Design and Build
The Hitachi C10RJ has a 15-ampere engine that produces 4500 RPM for toughest applications. The soft start functions lessen the noise and recoil on the start-up of the motor. The blade comes to a standstill as soon as the electric brake is applied.
The 40 toothed 10-inch carbide tipped blade has a high cutting capacity. The bevel range is between 0° – 45° and while at 0° it comes 3.125 inches and 2.25 inches at 45°. The table top is 28.75 inches by 22 inches without the feed out support of 28.75 inches by 2 inches.
This stabilizes the material. The 3/4-inch T-slot miter gauge has a large scale with positive stops at 0°, 15°, 30°, 45° and 60° to both sides. There is an overload protection to prevent damage to the motor. And a dust port to take away the dust.
The Hitachi C10RJ is engineered for cross-cutting and rip-sawing hardwood, plywood, ordinary wood and composite woods. The saw can deliver all kinds of cuts. The roll and fold stand have sturdy legs for an easy setup and pack up. They also offer stability while making the cut.
The stand has wheels that make it easy to move the saw-rig over even and uneven terrain. The table saw comes has a soft start, a large, low-friction work surface. There is an electric brake besides telescopic table extensions to support large sheets. There is an onboard toolbox for easy storage.
The metabo delivers a 35-inch rip capacity to the right and 22 inches to the left. The maximum cutting capacity at 90 is 3.125 inches and 2.25 inches at 45. The maximum dado width is 8.8125 inches.
The saw comes with a blade, a blade-guard assembly, an anti-kickback pawl, a miter gauge, a push stick, a rip fence, the outfeed support and a pair of blade wrenches. There are a 5mm, 4mm and 2.5mm Hex Bar wrench along with a 2-year warranty.
The DEWALT DW744XRS is a versatile 10-Inch table saw. It comes with a pair of rolling stand making it a portable design.
DeWalt is a brand name by Black and Decker Inc, a subsidiary of Stanley Black and Decker. It is a well-known American brand that makes hand and power tools for woodwork and construction works.
Design and Build
It has a powerful 15-ampere high torque motor that spins at 3650 RPM. Site-Pro Modular Guarding (SMG)System is for an easy setup and other applications. It is a tool-free adjustment with application-specific components.The saw’s fence configuration enables a hugerip capacity. It can cut dados and make deep cuts at 45° and 90°.
The rack and pinion fence rails are for fast, accurate, and smooth fence adjustments.The telescoping design of the rails extends to 24 inches supporting full sheets for ripping. When retracted they make for a compact design fortransportation. There are other components and push stick along with a dust collection port that takes away the sawdust.
The DEWALT DW744XRS offers application-specific setups and has a Site-Pro Modular Guarding System. The model is loaded with a push stick,miter gauge, a rolling stand and a 10-inch carbide blade with 24 teeth. The model has been designed for a job site and outdoors work. The stand raises the top to 30 inches off the floor which is the ideal height to make controlled and accurate cuts.
The DEWALT DW744XRS has a 24.5-inch rip capacity. It can cut dados up to 0.8125 inches wide also can cut 3.125 inches deep at 90° and 2.25 inches at 45°. It has a 26.5-inch and 19.25-inch table-top that supports a wide range of applications and has a 2-inch wide dust-collection port. The table weighs 58 pounds and portable due to the rolling stand. The saw can be rolled to the job site on heavy duty wheels and steadied on a pair of heavy-duty aluminium stand pairs. It has innovative features like folding legs that raise your table top 30 inches off the ground.
The DW744XRS comes with a rolling saw stand, a 10-inch carbide blade, a miter gauge, a push-stick and the standard DeWalt warranty.
7. DEWALT DW745
Another performer by DeWalt. This table saw has a blade with a 10-inch diameter. It has a Site-Pro Modular Guarding (SPMG)System that can be modified for specific applications that deliver quick and accurate cuts. The portable design is enhanced by a 15-ampere motor that makes a 20-inch rip.
Design and Build
DEWALT DW745 delivers a consistent performance due to the high torque powerful engine. It cuts through pressure treated lumber and solid wood with equal ease. It has a large rip and cut capacity. The rack and pinion adjustment are accurate with a telescopic design that makes measurement adjustments quicker and easier.
There is a guarding system that is easy to set up and modify for a variety of applications. The table surface reduces friction for easy gliding of the material while cutting. The rolled-steel cage base offers a steady base for improved durability.
The DEWALT DW745 can make rips, straight, bevel and miter cuts between 0 – 45. The saw has a portable design this means you can work anywhere. This DEWALT weighs only 45 pounds, making it easy to transport from workshop to job site. The added convenience of storing the tools onboard adds to the utility. The 2.5-inch dust collection port allows you to connect with the vacuum keeping the work area clean.
The DEWALT DW745 comes with a 15-ampere high torque motor that spins at 3850 RPM. It has a 20-inch rip capacity and can make a maximum cut of 3.125 inches at 90 and 2.25 inches at 45.
The unit comes with a set of blade guards, a miter gauge, a push stick, and a 10-inch carbide blade(24T). The DeWalt comes with a 3-year warranty and other standard services by the company.
Best for DIYers
Porter Cable manufacturing company have a proud heritage of innovation in power and pneumatic tools. A subsidiary of Stanley Black & Decker, they are a well-known name in portable circular saws, belt sanders and band saws.
Design and Build
The Porter-Cable PCC780LA comes with a 7-inch blade that has a no-load spin of 2800 RPM. It has a maximum rip capacity of 17 inches which the best in the class. It is a tabletop battery-operated tile cutting saw. The battery comes with a charger and has a maximum charge of 20 volts. There is an onboard miter-square that help make a repeatable rip and miter cuts. There is a water container beneath the cutting surface that keeps the work surface clean. The splash guard keeps the water from splashing on the operator. To empty the water container simply pull the plug after use to drain the water. The cordless power offers mobility and portability. The battery charge indicator shows the remaining battery life.
The PCC780LA powers at 20 volts. It is a 7-inch cordless Table-Top Wet Tile Saw. The saw brings you a world-class performance and convenience meant for professional tile setters, DIYer or remodelers.
The Porter-Cable PCC780LA has a maximum battery power of 20 volts. The machine can deliver 150 cuts of 3 inches by 6 inches of a ceramic tile per charge. It is a 4.0Ah Lithium battery. The cast metal surface. The cart gives the operator the best-in-class, on-the-table cutting capacity. The surface supports up to 17 inches of tile while delivering an accuracy within 0.0625 inches over a cut of 12 inches.
It comes with a PCC699L Charger and a 7-inch Porcelain Tile Blade. There is a Miter Square, a Blade Wrench and a three-year warranty, 1-year free service and a 90-day money back guarantee.